TODO: Overview
The Oyanami board is open-source. You can grab the Gerber files from the Releases page and send those to a fabricator of your choice.
Recommended settings:
- ENIG or Hard Gold finishing
- Beveled or chamfered edge connector
- Contra (MSX2)
- F1 Spirit
- Nemesis
- Nemesis 2
- Parodius
- Salamander
- Spy vs. Spy II (64kB Konami-mapper version)
- The Fairyland Story
- The Maze of Galious: Knightmare 2
- Treasure of USAS (MSX2)
- Vampire Killer (MSX2)
This is an incomplete list, please submit pull requests for any other games you have tested.
| Position | Component | Digi-Key link | Comments |
|---|---|---|---|
| U1 | SST39SF040 DIP EEPROM | ||
| U3 | 74LS670 DIP | ||
| U4 | 74LS02 DIP | ||
| C... | 0.1µF through-hole ceramic capacitor | ||
| RN1 | 10kΩ x 8 (9-pin SIP) resistor network | ||
| SW1 | 2-pin DIP switch |
I also recommend getting a case for the PCB from somewhere like Retro Game Restore.
Beware! Using socketed ICs may not leave enough vertical height for a standard Konami-style cartridge case to close.