-
Notifications
You must be signed in to change notification settings - Fork 268
New issue
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
Feature Request - Add Arachne slicing function. #54
Comments
Will add this feature in recent release. |
@wuyifanfancy when you say "recent release" do you mean 01.01.01.01 version released a couple of days ago has Arachne now? I didn't see it in the release notes. |
SuperSlicer also now adding this . |
Would be a really valuable feature for printing with 0.6mm nozzle when printing with filaments that would otherwise clog the 0.4mm nozzle. |
@hutje yeah, plus omitting those nasty gap fills between two walls that are just a hair apart the risk of a clog is even more reduced |
Yea, the 3D printing world has quickly all decided that Arachne is pretty awesome with relatively few downsides. Cura really knocked it out of the park with this feature. |
This has been added, but I'm leaving the request open as it's only been added for specific slicing tasks. I wholly expect additional Arachne in the future. |
Where has this been added exactly ? are you looking at the 1.2.0 source which hasn't been released in binary form ? Additionally i'm not sure why they'd partially implement Arachne whereas other slicers have gone "whole hog" with their implementations.. I'm wondering what they've NOT done yet ? |
You may have missed it, but 1.2.0.4 was released as a binary before they discovered a selection of bugs and removed it again. I'm sure it'll be back again soon. |
But to my other questions : how is this a partial implementation of Arachne? |
I'm by no means an expert but I believe right now it's being used for gap infill, but not perimeters. I think PrusaSlicer is almost the other way around, not using it for gap fill, but using it for perimeters |
Arachne has confliction with overhang slowing down and overhang cooling feature of BambuStudio, so we can't apply it for wall at the moment. We are still trying to fix this confliction. |
You might look at Superslicer which has Arachne AND custom settings for overhangs |
Yesss,full Arachne! 🕷️ |
This is included in v1.4. |
As per the title.
PrusaSlicer 2.5 Alpha now has the Arachne slicing function - it would be great to have this implemented in Bambu Studio soon too.
The text was updated successfully, but these errors were encountered: