station-m2: Use Raxda u-boot 2024.01

config/boards/station-m2.csc

@@ -2,29 +2,34 @@
 BOARD_NAME="Station M2"
 BOARDFAMILY="rk35xx"
 BOARD_MAINTAINER=""
-BOOTCONFIG="firefly-m2-rk3568_defconfig"
+BOOTCONFIG="station-m2-rk3566_defconfig"
 KERNEL_TARGET="legacy,vendor,current,edge"
 FULL_DESKTOP="yes"
 BOOT_LOGO="desktop"
 BOOT_FDT_FILE="rockchip/rk3566-firefly-roc-pc.dtb"
-SRC_EXTLINUX="yes"
-SRC_CMDLINE="console=ttyS02,1500000 console=tty0"
+BOOT_SCENARIO="spl-blobs"
 ASOUND_STATE="asound.state.station-m2"
 IMAGE_PARTITION_TABLE="gpt"
 
 function post_family_tweaks__station_m2() {
     display_alert "$BOARD" "Installing board tweaks" "info"
 
-	cp -R $SRC/packages/blobs/rtl8723bt_fw/* $SDCARD/lib/firmware/rtl_bt/
 	cp -R $SRC/packages/blobs/station/firmware/* $SDCARD/lib/firmware/
 
 	return 0
 }
 
 # Override family config for this board; let's avoid conditionals in family config.
-function post_family_config__stationm2_use_vendor_uboot() {
-	BOOTSOURCE='https://github.com/150balbes/u-boot-rk'
-	BOOTBRANCH='branch:rk356x'
-	BOOTDIR="u-boot-${BOARD}"
-	BOOTPATCHDIR="u-boot-station-p2"
+function post_family_config__stationm2_use_radxa_vendor_uboot() {
+	BOOTSOURCE='https://github.com/radxa/u-boot.git'
+	BOOTBRANCH='branch:rk35xx-2024.01'
+	BOOTPATCHDIR="u-boot-radxa-latest"
+
+	UBOOT_TARGET_MAP="BL31=$RKBIN_DIR/$BL31_BLOB ROCKCHIP_TPL=$RKBIN_DIR/$DDR_BLOB;;u-boot-rockchip.bin"
+
+	unset uboot_custom_postprocess write_uboot_platform write_uboot_platform_mtd
+
+	function write_uboot_platform() {
+		dd if=$1/u-boot-rockchip.bin of=$2 seek=64 conv=notrunc status=none
+	}
 }

patch/u-boot/u-boot-radxa-latest/board_station-m2-rk3566_defconfig.patch

@@ -0,0 +1,142 @@
+diff -Nuar a/configs/station-m2-rk3566_defconfig b/configs/station-m2-rk3566_defconfig
+--- a/configs/station-m2-rk3566_defconfig
++++ b/configs/station-m2-rk3566_defconfig
+@@ -0,0 +1,138 @@
++CONFIG_ARM=y
++CONFIG_SKIP_LOWLEVEL_INIT=y
++CONFIG_COUNTER_FREQUENCY=24000000
++CONFIG_ARCH_ROCKCHIP=y
++CONFIG_TEXT_BASE=0x00a00000
++CONFIG_SPL_LIBCOMMON_SUPPORT=y
++CONFIG_SPL_LIBGENERIC_SUPPORT=y
++CONFIG_NR_DRAM_BANKS=2
++CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
++CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xc00000
++CONFIG_SF_DEFAULT_SPEED=24000000
++CONFIG_SF_DEFAULT_MODE=0x2000
++CONFIG_DEFAULT_DEVICE_TREE="rk3566-radxa-zero3"
++CONFIG_ROCKCHIP_RK3568=y
++CONFIG_SPL_ROCKCHIP_COMMON_BOARD=y
++CONFIG_ROCKCHIP_SPI_IMAGE=y
++CONFIG_SPL_SERIAL=y
++CONFIG_SPL_STACK_R_ADDR=0x600000
++CONFIG_SPL_STACK=0x400000
++CONFIG_DEBUG_UART_BASE=0xFE660000
++CONFIG_DEBUG_UART_CLOCK=24000000
++CONFIG_SPL_SPI_FLASH_SUPPORT=y
++CONFIG_SPL_SPI=y
++CONFIG_SYS_LOAD_ADDR=0xc00800
++CONFIG_PCI=y
++CONFIG_DEBUG_UART=y
++CONFIG_FIT=y
++CONFIG_FIT_VERBOSE=y
++CONFIG_SPL_FIT_SIGNATURE=y
++CONFIG_SPL_LOAD_FIT=y
++CONFIG_LEGACY_IMAGE_FORMAT=y
++CONFIG_SPI_BOOT=y
++CONFIG_BOOTDELAY=0
++CONFIG_AUTOBOOT_KEYED=y
++CONFIG_AUTOBOOT_PROMPT="Hit CtrlC key in %d seconds to stop autoboot...\n"
++CONFIG_AUTOBOOT_STOP_STR="\x03"
++CONFIG_AUTOBOOT_KEYED_CTRLC=y
++CONFIG_BOOTCOMMAND="bootflow scan; run distro_bootcmd; echo Boot failed. Reset in 3 seconds...; sleep 3; reset;"
++CONFIG_USE_PREBOOT=y
++CONFIG_PREBOOT="usb start; pci enum"
++CONFIG_DEFAULT_FDT_FILE="rockchip/rk3566-radxa-zero3.dtb"
++# CONFIG_SYS_DEVICE_NULLDEV is not set
++# CONFIG_DISPLAY_CPUINFO is not set
++CONFIG_DISPLAY_BOARDINFO_LATE=y
++CONFIG_ID_EEPROM=y
++CONFIG_SPL_MAX_SIZE=0x40000
++CONFIG_SPL_PAD_TO=0x7f8000
++CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
++CONFIG_SPL_BSS_START_ADDR=0x4000000
++CONFIG_SPL_BSS_MAX_SIZE=0x4000
++# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
++# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
++CONFIG_SPL_STACK_R=y
++CONFIG_SPL_SPI_LOAD=y
++CONFIG_SYS_SPI_U_BOOT_OFFS=0x60000
++CONFIG_SPL_ATF=y
++CONFIG_CMD_GPIO=y
++CONFIG_CMD_GPIO_READ=y
++CONFIG_CMD_PWM=y
++CONFIG_CMD_GPT=y
++CONFIG_CMD_I2C=y
++CONFIG_CMD_MBR=y
++CONFIG_CMD_MMC=y
++CONFIG_CMD_PCI=y
++CONFIG_CMD_POWEROFF=y
++CONFIG_CMD_USB=y
++CONFIG_CMD_USB_MASS_STORAGE=y
++# CONFIG_CMD_SETEXPR is not set
++CONFIG_CMD_PMIC=y
++CONFIG_CMD_REGULATOR=y
++# CONFIG_SPL_DOS_PARTITION is not set
++CONFIG_SPL_OF_CONTROL=y
++CONFIG_OF_LIVE=y
++CONFIG_OF_SPL_REMOVE_PROPS="clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
++CONFIG_SPL_DM_SEQ_ALIAS=y
++CONFIG_SPL_REGMAP=y
++CONFIG_SPL_SYSCON=y
++CONFIG_SATA=y
++CONFIG_SCSI_AHCI=y
++CONFIG_AHCI_PCI=y
++CONFIG_SATA_SIL=y
++CONFIG_SPL_CLK=y
++CONFIG_FASTBOOT_BUF_ADDR=0x13000000
++CONFIG_FASTBOOT_FLASH_MMC_DEV=2
++CONFIG_FASTBOOT_MMC_BOOT_SUPPORT=y
++CONFIG_FASTBOOT_MMC_USER_SUPPORT=y
++CONFIG_ROCKCHIP_GPIO=y
++CONFIG_SYS_I2C_ROCKCHIP=y
++CONFIG_LED=y
++CONFIG_LED_GPIO=y
++CONFIG_MISC=y
++CONFIG_SUPPORT_EMMC_RPMB=y
++CONFIG_MMC_HS200_SUPPORT=y
++CONFIG_MMC_DW=y
++CONFIG_MMC_DW_ROCKCHIP=y
++CONFIG_MMC_SDHCI=y
++CONFIG_MMC_SDHCI_SDMA=y
++CONFIG_MMC_SDHCI_ROCKCHIP=y
++CONFIG_SF_DEFAULT_BUS=4
++CONFIG_SPI_FLASH_SFDP_SUPPORT=y
++CONFIG_SPI_FLASH_GIGADEVICE=y
++CONFIG_SPI_FLASH_MACRONIX=y
++CONFIG_SPI_FLASH_WINBOND=y
++CONFIG_SPI_FLASH_XTX=y
++CONFIG_ETH_DESIGNWARE=y
++CONFIG_GMAC_ROCKCHIP=y
++CONFIG_NVME_PCI=y
++CONFIG_PCIE_DW_ROCKCHIP=y
++CONFIG_PHY_ROCKCHIP_INNO_USB2=y
++CONFIG_PHY_ROCKCHIP_NANENG_COMBOPHY=y
++CONFIG_SPL_PINCTRL=y
++CONFIG_DM_PMIC=y
++CONFIG_DM_PMIC_FAN53555=y
++CONFIG_PMIC_RK8XX=y
++CONFIG_REGULATOR_RK8XX=y
++CONFIG_PWM_ROCKCHIP=y
++CONFIG_SPL_RAM=y
++CONFIG_SCSI=y
++CONFIG_DM_SCSI=y
++CONFIG_BAUDRATE=1500000
++CONFIG_DEBUG_UART_SHIFT=2
++CONFIG_SYS_NS16550_MEM32=y
++CONFIG_ROCKCHIP_SFC=y
++CONFIG_ROCKCHIP_SPI=y
++CONFIG_SYSRESET=y
++CONFIG_USB=y
++CONFIG_USB_XHCI_HCD=y
++CONFIG_USB_XHCI_DWC3=y
++CONFIG_USB_EHCI_HCD=y
++CONFIG_USB_EHCI_GENERIC=y
++CONFIG_USB_OHCI_HCD=y
++CONFIG_USB_OHCI_GENERIC=y
++CONFIG_USB_DWC3=y
++CONFIG_USB_DWC3_GENERIC=y
++CONFIG_USB_KEYBOARD=y
++CONFIG_USB_GADGET=y
++CONFIG_USB_GADGET_PRODUCT_NUM=0x2200
++CONFIG_ERRNO_STR=y