Replies: 2 comments 6 replies
-
No retain settings available there, but you could replicate the payload with an additional publish using retain, by having a small bot somewhere. If your Tasmota device is based on ESP32, this is easy to do with Berry on the same device. With "classic" rules, you'd have to have triggers picking up fields, one by one, before doing a new An alternate strategy, and probably the easiest, would be if you can send some IR command resulting in the settings being sent by the AC again. Not using HA, but I'd expect it to be possible to do something when it has restarted. |
Beta Was this translation helpful? Give feedback.
-
no IR command, it works with serial connection. The problem is not to send a command, but to restore the previous state or retrive the actual state. If I replicate the payload with the retain on, in whatever way I do it, I will end up with a double payload everytime. Unless I create another topic for every climate. I can actually survive without the retain, I can somehow find a workaround to deal with, but it would be so easy to be able to set up a retain in that topic or a possibility to retrive the state like an empty topic on cmnd/tasmotas/state does. |
Beta Was this translation helpful? Give feedback.
-
Hi everyone,
I can’t find the command to set the retain flag for the topic tele/********/HVACSETTINGS.
Every time I restart Home Assistant, the air conditioners status shows as "unknown" until Tasmota sends an update. I’ve tried all the retain commands I found on the Tasmota wiki without success.
Any help?
Thank you!
Beta Was this translation helpful? Give feedback.
All reactions