Makefile.direct

# This is the original manually generated Makefile.  It may still be used
# to build the collector.
#
# Primary targets:
# gc.a - builds basic library
# c++ - adds C++ interface to library
# cords - adds cords (heavyweight strings) to library
# test - prints porting information, then builds basic version of gc.a,
#        and runs some tests of collector and cords.  Does not add cords or
#        c++ interface to gc.a
# cord/de - builds dumb editor based on cords.

ABI_FLAG=
# ABI_FLAG should be the cc flag that specifies the ABI.  On most
# platforms this will be the empty string.  Possible values:
# +DD64 for 64-bit executable on HP/UX.
# -n32, -n64, -o32 for SGI/MIPS ABIs.

AS_ABI_FLAG=$(ABI_FLAG)
# ABI flag for assembler.  On HP/UX this is +A64 for 64 bit
# executables.

CC=cc $(ABI_FLAG)
CXX=g++ $(ABI_FLAG)
AS=as $(AS_ABI_FLAG)
#  The above doesn't work with gas, which doesn't run cpp.
#  Define AS as `gcc -c -x assembler-with-cpp' instead.

# Redefining srcdir allows object code for the nonPCR version of the collector
# to be generated in different directories.
srcdir= .
VPATH= $(srcdir)

# Path to atomic_ops source.
AO_SRC_DIR=$(srcdir)/libatomic_ops

CFLAGS_EXTRA=
CFLAGS= -O -I$(srcdir)/include -I$(AO_SRC_DIR)/src \
  -DATOMIC_UNCOLLECTABLE -DNO_EXECUTE_PERMISSION -DALL_INTERIOR_POINTERS \
  $(CFLAGS_EXTRA)

# To build the parallel collector on Linux, add to the above:
# -DGC_LINUX_THREADS -DPARALLEL_MARK -DTHREAD_LOCAL_ALLOC
# To build the thread-capable preload library that intercepts
# malloc, add -DGC_USE_DLOPEN_WRAP -DREDIRECT_MALLOC=GC_malloc -fpic
# To build the parallel collector in a static library on HP/UX,
# add to the above:
# -DGC_HPUX_THREADS -DTHREAD_LOCAL_ALLOC -D_POSIX_C_SOURCE=199506L -mt
# FIXME: PARALLEL_MARK currently broken on HP/UX.
# To build the thread-safe collector on Tru64, add to the above:
# -pthread -DGC_OSF1_THREADS

# HOSTCC and HOSTCFLAGS are used to build executables that will be run as
# part of the build process, i.e. on the build machine.  These will usually
# be the same as CC and CFLAGS, except in a cross-compilation environment.
# Note that HOSTCFLAGS should include any -D flags that affect thread support.
HOSTCC=$(CC)
HOSTCFLAGS=$(CFLAGS)

# For dynamic library builds, it may be necessary to add flags to generate
# PIC code, e.g. -fPIC on Linux.

# Setjmp_test may yield overly optimistic results when compiled
# without optimization.

# Look into doc/README.macros for the description of the "define arguments"
# influencing the collector configuration.

CXXFLAGS= $(CFLAGS)
AR= ar
RANLIB= ranlib


OBJS= alloc.o reclaim.o allchblk.o misc.o mach_dep.o os_dep.o mark_rts.o \
  headers.o mark.o obj_map.o blacklst.o finalize.o new_hblk.o dbg_mlc.o  \
  malloc.o stubborn.o checksums.o pthread_support.o pthread_stop_world.o \
  darwin_stop_world.o typd_mlc.o ptr_chck.o mallocx.o gcj_mlc.o specific.o \
  gc_dlopen.o backgraph.o win32_threads.o pthread_start.o \
  thread_local_alloc.o fnlz_mlc.o atomic_ops.o atomic_ops_sysdeps.o

CSRCS= reclaim.c allchblk.c misc.c alloc.c mach_dep.c os_dep.c mark_rts.c \
  headers.c mark.c obj_map.c pcr_interface.c blacklst.c finalize.c \
  new_hblk.c real_malloc.c dyn_load.c dbg_mlc.c malloc.c stubborn.c \
  checksums.c pthread_support.c pthread_stop_world.c darwin_stop_world.c \
  typd_mlc.c ptr_chck.c mallocx.c gcj_mlc.c specific.c gc_dlopen.c \
  backgraph.c win32_threads.c pthread_start.c thread_local_alloc.c fnlz_mlc.c

CORD_SRCS= cord/cordbscs.c cord/cordxtra.c cord/cordprnt.c cord/tests/de.c \
  cord/tests/cordtest.c include/cord.h include/ec.h \
  include/cord_pos.h cord/tests/de_win.c cord/tests/de_win.h \
  cord/tests/de_cmds.h cord/tests/de_win.rc

CORD_OBJS= cord/cordbscs.o cord/cordxtra.o cord/cordprnt.o

SRCS= $(CSRCS) \
  include/gc.h include/gc_typed.h include/gc_tiny_fl.h \
  include/gc_version.h include/private/gc_hdrs.h include/private/gc_priv.h \
  include/private/gcconfig.h include/private/gc_pmark.h \
  include/gc_inline.h include/gc_mark.h include/gc_disclaim.h \
  tools/threadlibs.c \
  tools/if_mach.c tools/if_not_there.c gc_cpp.cc include/gc_cpp.h \
  tools/gcname.c include/weakpointer.h include/private/gc_locks.h \
  include/new_gc_alloc.h include/gc_allocator.h \
  include/javaxfc.h \
  include/gc_backptr.h include/gc_gcj.h include/private/dbg_mlc.h \
  include/private/specific.h include/leak_detector.h \
  include/gc_pthread_redirects.h \
  include/gc_config_macros.h include/private/pthread_support.h \
  include/private/pthread_stop_world.h include/private/darwin_semaphore.h \
  include/private/darwin_stop_world.h include/private/thread_local_alloc.h \
  src/ia64_save_regs_in_stack.s src/sparc_mach_dep.S \
  src/sparc_netbsd_mach_dep.s src/sparc_sunos4_mach_dep.s $(CORD_SRCS)

DOC_FILES= README.QUICK TODO doc/README.Mac doc/README.OS2 \
  doc/README.amiga doc/README.cords doc/debugging.html \
  doc/finalization.html doc/porting.html doc/overview.html \
  doc/README.hp doc/README.linux doc/README.rs6000 \
  doc/README.sgi doc/README.solaris2 doc/README.uts \
  doc/README.symbian doc/README.win32 README.md AUTHORS doc/gc.man \
  doc/README.environment doc/tree.html doc/gcdescr.html \
  doc/README.autoconf doc/README.macros doc/README.ews4800 \
  doc/README.DGUX386 doc/README.arm.cross doc/leak.html \
  doc/scale.html doc/gcinterface.html doc/README.darwin \
  doc/simple_example.html doc/README.win64

TESTS= tests/test.c tests/test_cpp.cc tests/trace_test.c \
  tests/leak_test.c tests/thread_leak_test.c tests/middle.c \
  tests/smash_test.c tests/huge_test.c

GNU_BUILD_FILES= configure.ac Makefile.am configure install-sh Makefile.in \
  aclocal.m4 config.sub config.guess \
  include/include.am doc/doc.am \
  ltmain.sh mkinstalldirs depcomp missing \
  cord/cord.am tests/tests.am autogen.sh \
  bdw-gc.pc.in compile

OTHER_MAKEFILES= OS2_MAKEFILE NT_MAKEFILE gc.mak \
  BCC_MAKEFILE EMX_MAKEFILE WCC_MAKEFILE PCR-Makefile SMakefile.amiga \
  digimars.mak Makefile.direct NT_STATIC_THREADS_MAKEFILE \
  NT_X64_STATIC_THREADS_MAKEFILE NT_X64_THREADS_MAKEFILE

OTHER_FILES= tools/setjmp_t.c tools/callprocs.sh extra/MacOS.c \
  extra/Mac_files/datastart.c extra/Mac_files/dataend.c \
  extra/Mac_files/MacOS_config.h tools/add_gc_prefix.c gc_cpp.cpp \
  extra/symbian/global_end.cpp extra/symbian/global_start.cpp \
  extra/symbian/init_global_static_roots.cpp extra/symbian.cpp \
  build/s60v3/bld.inf build/s60v3/libgc.mmp \
  extra/AmigaOS.c extra/msvc_dbg.c include/private/msvc_dbg.h \
  $(TESTS) $(GNU_BUILD_FILES) $(OTHER_MAKEFILES)

CORD_INCLUDE_FILES= $(srcdir)/include/gc.h $(srcdir)/include/cord.h \
  $(srcdir)/include/ec.h $(srcdir)/include/cord_pos.h

UTILS= if_mach if_not_there threadlibs

# Libraries needed for curses applications.  Only needed for de.
CURSES= -lcurses -ltermlib

# The following is irrelevant on most systems.  But a few
# versions of make otherwise fork the shell specified in
# the SHELL environment variable.
SHELL= /bin/sh

SPECIALCFLAGS = -I$(srcdir)/include -I$(AO_SRC_DIR)/src
# Alternative flags to the C compiler for mach_dep.c.
# Mach_dep.c often doesn't like optimization, and it's
# not time-critical anyway.
# Set SPECIALCFLAGS to -q nodirect_code on Encore.

all: gc.a gctest

atomic_ops.o: $(AO_SRC_DIR)/src/atomic_ops.c
	$(CC) $(CFLAGS) -c -o $@ $<

atomic_ops_sysdeps.o: $(AO_SRC_DIR)/src/atomic_ops_sysdeps.S
	$(CC) $(CFLAGS) -c -o $@ $<

LEAKFLAGS=$(CFLAGS) -DFIND_LEAK

BSD-pkg-all: bsd-libgc.a bsd-libleak.a

bsd-libgc.a:
	$(MAKE) CFLAGS="$(CFLAGS)" clean c++-t
	mv gc.a bsd-libgc.a

bsd-libleak.a:
	$(MAKE) -f Makefile.direct CFLAGS="$(LEAKFLAGS)" clean c++-nt
	mv gc.a bsd-libleak.a

BSD-pkg-install: BSD-pkg-all
	${CP} bsd-libgc.a libgc.a
	${INSTALL_DATA} libgc.a ${PREFIX}/lib
	${INSTALL_DATA} gc.h gc_cpp.h ${PREFIX}/include
	${INSTALL_MAN} doc/gc.man ${PREFIX}/man/man3/gc.3

pcr: PCR-Makefile include/private/gc_private.h include/private/gc_hdrs.h \
include/private/gc_locks.h include/gc.h include/private/gcconfig.h \
mach_dep.o $(SRCS)
	$(MAKE) -f PCR-Makefile depend
	$(MAKE) -f PCR-Makefile

$(OBJS) tests/test.o dyn_load.o dyn_load_sunos53.o: \
    $(srcdir)/include/private/gc_priv.h \
    $(srcdir)/include/private/gc_hdrs.h $(srcdir)/include/private/gc_locks.h \
    $(srcdir)/include/gc.h $(srcdir)/include/gc_pthread_redirects.h \
    $(srcdir)/include/private/gcconfig.h $(srcdir)/include/gc_typed.h \
    $(srcdir)/include/gc_config_macros.h

mark.o typd_mlc.o finalize.o ptr_chck.o: $(srcdir)/include/gc_mark.h \
					 $(srcdir)/include/private/gc_pmark.h

specific.o pthread_support.o thread_local_alloc.o win32_threads.o: \
	$(srcdir)/include/private/specific.h $(srcdir)/include/gc_inline.h \
	$(srcdir)/include/private/thread_local_alloc.h

dbg_mlc.o gcj_mlc.o: $(srcdir)/include/private/dbg_mlc.h

tests/test.o: tests $(srcdir)/tests/test.c
	$(CC) $(CFLAGS) -c $(srcdir)/tests/test.c
	mv test.o tests/test.o

tests:
	mkdir tests

base_lib gc.a: $(OBJS) dyn_load.o $(UTILS)
	echo > base_lib
	rm -f dont_ar_1
	./if_mach SPARC SOLARIS touch dont_ar_1
	./if_mach SPARC SOLARIS $(AR) rus gc.a $(OBJS) dyn_load.o
	./if_mach M68K AMIGA touch dont_ar_1
	./if_mach M68K AMIGA $(AR) -vrus gc.a $(OBJS) dyn_load.o
	./if_not_there dont_ar_1 $(AR) ru gc.a $(OBJS) dyn_load.o
	./if_not_there dont_ar_1 $(RANLIB) gc.a || cat /dev/null
#	ignore ranlib failure; that usually means it doesn't exist, and isn't needed

cords: $(CORD_OBJS) cord/cordtest $(UTILS)
	rm -f dont_ar_3
	./if_mach SPARC SOLARIS touch dont_ar_3
	./if_mach SPARC SOLARIS $(AR) rus gc.a $(CORD_OBJS)
	./if_mach M68K AMIGA touch dont_ar_3
	./if_mach M68K AMIGA $(AR) -vrus gc.a $(CORD_OBJS)
	./if_not_there dont_ar_3 $(AR) ru gc.a $(CORD_OBJS)
	./if_not_there dont_ar_3 $(RANLIB) gc.a || cat /dev/null

gc_cpp.o: $(srcdir)/gc_cpp.cc $(srcdir)/include/gc_cpp.h $(srcdir)/include/gc.h
	$(CXX) -c $(CXXFLAGS) $(srcdir)/gc_cpp.cc

test_cpp: $(srcdir)/tests/test_cpp.cc $(srcdir)/include/gc_cpp.h gc_cpp.o $(srcdir)/include/gc.h \
    base_lib $(UTILS)
	rm -f test_cpp
	./if_mach HP_PA HPUX $(CXX) $(CXXFLAGS) -o test_cpp $(srcdir)/tests/test_cpp.cc gc_cpp.o gc.a -ldld `./threadlibs`
	./if_not_there test_cpp $(CXX) $(CXXFLAGS) -o test_cpp $(srcdir)/tests/test_cpp.cc gc_cpp.o gc.a `./threadlibs`

c++-t: c++
	./test_cpp 1

c++-nt: c++
	@echo "Use ./test_cpp 1 to test the leak library"

c++: gc_cpp.o $(srcdir)/include/gc_cpp.h test_cpp
	rm -f dont_ar_4
	./if_mach SPARC SOLARIS touch dont_ar_4
	./if_mach SPARC SOLARIS $(AR) rus gc.a gc_cpp.o
	./if_mach M68K AMIGA touch dont_ar_4
	./if_mach M68K AMIGA $(AR) -vrus gc.a gc_cpp.o
	./if_not_there dont_ar_4 $(AR) ru gc.a gc_cpp.o
	./if_not_there dont_ar_4 $(RANLIB) gc.a || cat /dev/null
	./test_cpp 1
	echo > c++

dyn_load_sunos53.o: dyn_load.c
	$(CC) $(CFLAGS) -DSUNOS53_SHARED_LIB -c $(srcdir)/dyn_load.c -o $@

# SunOS5 shared library version of the collector
sunos5gc.so: $(OBJS) dyn_load_sunos53.o
	$(CC) -G -o sunos5gc.so $(OBJS) dyn_load_sunos53.o -ldl
	ln sunos5gc.so libgc.so

# Alpha/OSF shared library version of the collector
libalphagc.so: $(OBJS)
	ld -shared -o libalphagc.so $(OBJS) dyn_load.o -lc
	ln libalphagc.so libgc.so

# IRIX shared library version of the collector
libirixgc.so: $(OBJS) dyn_load.o
	ld -shared $(ABI_FLAG) -o libirixgc.so $(OBJS) dyn_load.o -lc
	ln libirixgc.so libgc.so

# Linux shared library version of the collector
liblinuxgc.so: $(OBJS) dyn_load.o
	gcc -shared -o liblinuxgc.so $(OBJS) dyn_load.o
	ln liblinuxgc.so libgc.so

# Build gctest with dynamic library
dyn_test:
	$(CC) $(CFLAGS) -o gctest tests/test.c libgc.so `./threadlibs`
	./gctest

# Alternative Linux rule.  This is preferable, but is likely to break the
# Makefile for some non-linux platforms.
# LIBOBJS= $(patsubst %.o, %.lo, $(OBJS))
#
#.SUFFIXES: .lo $(SUFFIXES)
#
#.c.lo:
#	$(CC) $(CFLAGS) $(CPPFLAGS) -fPIC -c $< -o $@
#
# liblinuxgc.so: $(LIBOBJS) dyn_load.lo
# 	gcc -shared -Wl,-soname=libgc.so.0 -o libgc.so.0 $(LIBOBJS) dyn_load.lo
#	touch liblinuxgc.so

mach_dep.o: $(srcdir)/mach_dep.c $(srcdir)/src/sparc_mach_dep.S \
	    $(srcdir)/src/sparc_sunos4_mach_dep.s \
	    $(srcdir)/src/ia64_save_regs_in_stack.s \
	    $(srcdir)/src/sparc_netbsd_mach_dep.s $(UTILS)
	rm -f mach_dep.o
	./if_mach SPARC SOLARIS $(CC) -c -o mach_dep2.o $(srcdir)/src/sparc_mach_dep.S
	./if_mach SPARC OPENBSD $(AS) -o mach_dep2.o $(srcdir)/src/sparc_sunos4_mach_dep.s
	./if_mach SPARC NETBSD $(AS) -o mach_dep2.o $(srcdir)/src/sparc_netbsd_mach_dep.s
	./if_mach SPARC "" $(CC) -c -o mach_dep1.o $(SPECIALCFLAGS) $(srcdir)/mach_dep.c
	./if_mach SPARC "" ld -r -o mach_dep.o mach_dep1.o mach_dep2.o
	./if_mach IA64 "" as $(AS_ABI_FLAG) -o ia64_save_regs_in_stack.o $(srcdir)/src/ia64_save_regs_in_stack.s
	./if_mach IA64 "" $(CC) -c -o mach_dep1.o $(SPECIALCFLAGS) $(srcdir)/mach_dep.c
	./if_mach IA64 "" ld -r -o mach_dep.o mach_dep1.o ia64_save_regs_in_stack.o
	./if_not_there mach_dep.o $(CC) -c $(SPECIALCFLAGS) $(srcdir)/mach_dep.c

mark_rts.o: $(srcdir)/mark_rts.c $(UTILS)
	rm -f mark_rts.o
	-./if_mach ALPHA OSF1 $(CC) -c $(CFLAGS) -Wo,-notail $(srcdir)/mark_rts.c
	./if_not_there mark_rts.o $(CC) -c $(CFLAGS) $(srcdir)/mark_rts.c
#	Work-around for DEC optimizer tail recursion elimination bug.
#  The ALPHA-specific line should be removed if gcc is used.

alloc.o: include/gc_version.h

cord:
	mkdir cord

cord/cordbscs.o: cord $(srcdir)/cord/cordbscs.c $(CORD_INCLUDE_FILES)
	$(CC) $(CFLAGS) -c -I$(srcdir) $(srcdir)/cord/cordbscs.c
	mv cordbscs.o cord/cordbscs.o
#  not all compilers understand -o filename

cord/cordxtra.o: cord $(srcdir)/cord/cordxtra.c $(CORD_INCLUDE_FILES)
	$(CC) $(CFLAGS) -c -I$(srcdir) $(srcdir)/cord/cordxtra.c
	mv cordxtra.o cord/cordxtra.o

cord/cordprnt.o: cord $(srcdir)/cord/cordprnt.c $(CORD_INCLUDE_FILES)
	$(CC) $(CFLAGS) -c -I$(srcdir) $(srcdir)/cord/cordprnt.c
	mv cordprnt.o cord/cordprnt.o

cord/cordtest: $(srcdir)/cord/tests/cordtest.c $(CORD_OBJS) gc.a $(UTILS)
	rm -f cord/cordtest
	./if_mach SPARC DRSNX $(CC) $(CFLAGS) -o cord/cordtest $(srcdir)/cord/tests/cordtest.c $(CORD_OBJS) gc.a -lucb
	./if_mach HP_PA HPUX $(CC) $(CFLAGS) -o cord/cordtest $(srcdir)/cord/tests/cordtest.c $(CORD_OBJS) gc.a -ldld `./threadlibs`
	./if_mach M68K AMIGA $(CC) $(CFLAGS) -UGC_AMIGA_MAKINGLIB -o cord/cordtest $(srcdir)/cord/tests/cordtest.c $(CORD_OBJS) gc.a `./threadlibs`
	./if_not_there cord/cordtest $(CC) $(CFLAGS) -o cord/cordtest $(srcdir)/cord/tests/cordtest.c $(CORD_OBJS) gc.a `./threadlibs`

cord/de: $(srcdir)/cord/tests/de.c cord/cordbscs.o cord/cordxtra.o gc.a $(UTILS)
	rm -f cord/de
	./if_mach SPARC DRSNX $(CC) $(CFLAGS) -o cord/de $(srcdir)/cord/tests/de.c cord/cordbscs.o cord/cordxtra.o gc.a $(CURSES) -lucb `./threadlibs`
	./if_mach HP_PA HPUX $(CC) $(CFLAGS) -o cord/de $(srcdir)/cord/tests/de.c cord/cordbscs.o cord/cordxtra.o gc.a $(CURSES) -ldld `./threadlibs`
	./if_mach POWERPC AIX $(CC) $(CFLAGS) -o cord/de $(srcdir)/cord/tests/de.c cord/cordbscs.o cord/cordxtra.o gc.a -lcurses
	./if_mach POWERPC DARWIN $(CC) $(CFLAGS) -o cord/de $(srcdir)/cord/tests/de.c cord/cordbscs.o cord/cordxtra.o gc.a
	./if_mach I386 LINUX $(CC) $(CFLAGS) -o cord/de $(srcdir)/cord/tests/de.c cord/cordbscs.o cord/cordxtra.o gc.a -lcurses `./threadlibs`
	./if_mach ALPHA LINUX $(CC) $(CFLAGS) -o cord/de $(srcdir)/cord/tests/de.c cord/cordbscs.o cord/cordxtra.o gc.a -lcurses `./threadlibs`
	./if_mach IA64 LINUX $(CC) $(CFLAGS) -o cord/de $(srcdir)/cord/tests/de.c cord/cordbscs.o cord/cordxtra.o gc.a -lcurses `./threadlibs`
	./if_mach M68K AMIGA $(CC) $(CFLAGS) -UGC_AMIGA_MAKINGLIB -o cord/de $(srcdir)/cord/tests/de.c cord/cordbscs.o cord/cordxtra.o gc.a -lcurses
	./if_not_there cord/de $(CC) $(CFLAGS) -o cord/de $(srcdir)/cord/tests/de.c cord/cordbscs.o cord/cordxtra.o gc.a $(CURSES) `./threadlibs`

if_mach: $(srcdir)/tools/if_mach.c $(srcdir)/include/private/gcconfig.h
	$(HOSTCC) $(HOSTCFLAGS) -o if_mach $(srcdir)/tools/if_mach.c

threadlibs: $(srcdir)/tools/threadlibs.c $(srcdir)/include/private/gcconfig.h
	$(HOSTCC) $(HOSTCFLAGS) -o threadlibs $(srcdir)/tools/threadlibs.c

if_not_there: $(srcdir)/tools/if_not_there.c
	$(HOSTCC) $(HOSTCFLAGS) -o if_not_there $(srcdir)/tools/if_not_there.c

clean:
	rm -f gc.a *.o *.exe tests/*.o gctest gctest_dyn_link test_cpp \
	      setjmp_test  mon.out gmon.out a.out core if_not_there if_mach \
	      base_lib c++ threadlibs $(CORD_OBJS) cord/cordtest cord/de
	-rm -f *~

gctest: tests/test.o gc.a $(UTILS)
	rm -f gctest
	./if_mach SPARC DRSNX $(CC) $(CFLAGS) -o gctest  tests/test.o gc.a -lucb
	./if_mach HP_PA HPUX $(CC) $(CFLAGS) -o gctest  tests/test.o gc.a -ldld `./threadlibs`
	./if_mach M68K AMIGA $(CC) $(CFLAGS) -UGC_AMIGA_MAKINGLIB -o gctest  tests/test.o gc.a `./threadlibs`
	./if_not_there gctest $(CC) $(CFLAGS) -o gctest tests/test.o gc.a `./threadlibs`

# If an optimized setjmp_test generates a segmentation fault,
# odds are your compiler is broken.  Gctest may still work.
# Try compiling setjmp_t.c unoptimized.
setjmp_test: $(srcdir)/tools/setjmp_t.c $(srcdir)/include/gc.h $(UTILS)
	$(CC) $(CFLAGS) -o setjmp_test $(srcdir)/tools/setjmp_t.c

test: KandRtest cord/cordtest
	cord/cordtest

# Those tests that work even with a K&R C compiler:
KandRtest: setjmp_test gctest
	./setjmp_test
	./gctest

add_gc_prefix: $(srcdir)/tools/add_gc_prefix.c $(srcdir)/include/gc_version.h
	$(CC) -o add_gc_prefix $(srcdir)/tools/add_gc_prefix.c

gcname: $(srcdir)/tools/gcname.c $(srcdir)/include/gc_version.h
	$(CC) -o gcname $(srcdir)/tools/gcname.c

#We assume this is being done from source directory.
dist gc.tar: $(SRCS) $(DOC_FILES) $(OTHER_FILES) add_gc_prefix gcname
	rm -f `./gcname`
	ln -s . `./gcname`
	./add_gc_prefix $(SRCS) $(DOC_FILES) $(OTHER_FILES) > /tmp/gc.tar-files
	tar cvfh gc.tar `cat /tmp/gc.tar-files`
	cp gc.tar `./gcname`.tar
	gzip `./gcname`.tar
	rm `./gcname`

gc.tar.Z: gc.tar
	compress gc.tar

gc.tar.gz: gc.tar
	gzip gc.tar

lint: $(CSRCS) tests/test.c
	lint -DLINT $(CSRCS) tests/test.c | egrep -v "possible pointer alignment problem|abort|exit|sbrk|mprotect|syscall|change in ANSI|improper alignment"

# BTL: added to test shared library version of collector.
# Currently works only under SunOS5.  Requires GC_INIT call from statically
# loaded client code.
ABSDIR = `pwd`
gctest_dyn_link: tests/test.o libgc.so
	$(CC) -L$(ABSDIR) -R$(ABSDIR) -o gctest_dyn_link tests/test.o -lgc -ldl -lthread

gctest_irix_dyn_link: tests/test.o libirixgc.so
	$(CC) -L$(ABSDIR) -o gctest_irix_dyn_link tests/test.o -lirixgc

SYM_PREFIX-libgc=GC

reserved_namespace: $(SRCS)
	for file in $(SRCS) tests/test.c tests/test_cpp.cc; do \
		sed s/GC_/_GC_/g < $$file > tmp; \
		cp tmp $$file; \
		done

user_namespace: $(SRCS)
	for file in $(SRCS) tests/test.c tests/test_cpp.cc; do \
		sed s/_GC_/GC_/g < $$file > tmp; \
		cp tmp $$file; \
		done