Skip to content

Releases: WOA-Project/Lumia-Drivers

Version 2108.67

21 Aug 08:59
@gus33000 gus33000
v2108.67
2524077
Compare
Choose a tag to compare
Version 2108.67

Lumia Drivers BSP - Version 2108.67

Released: 08/21/2021 12:00 AM UTC+2

Quality: Stable

Important installation notes

image

Please make sure your battery is fully charged before installing this driver pack. For most batteries the charge must be 100% as the phone may shutdown during setup if the battery is even at 80% charge.
Make sure battery is charged to 100% before continuing. If this is not the case, reboot your device now and charge it in an Operating System.

Reminder: if you are using WOA Deployer, please do not use the "Force Dual Boot" button, otherwise the setup process
will FAIL.

Release notes

Changelog

  • Updated Mobile Networking Service

    Addresses an issue that prevented creation of the ICan0 value on builds lower or equal to 18908.

Side note:

We also have an updated UEFI along with this release which brings fTPM support to our devices!

How to offline update an existing Windows Desktop installation

  • Switch the device into mass storage.

  • Take note of the drive letter the Windows partition is using, here we will assume it got mounted as I:

  • Download [Lumia-Drivers-Full.zip] from https://github.com/WOA-Project/Lumia-Drivers/releases/latest

  • Extract said zip file to a folder of your choice, we will assume here we extracted it to C:\UpdatedDrivers

  • Download the DriverUpdater utility from https://github.com/WOA-Project/DriverUpdater/releases/latest

  • Open a command prompt as administrator, where the driver utility got downloaded

  • If your device is a Lumia 950, execute the following command:

    DriverUpdater.exe C:\UpdatedDrivers\Lumia-Drivers-XXXX\definitions\Desktop\ARM64\Internal\950.txt C:\UpdatedDrivers\Lumia-Drivers-XXXX\ I:\

  • If your device is a Lumia 950 XL, execute the following command:

    DriverUpdater.exe C:\UpdatedDrivers\Lumia-Drivers-XXXX\definitions\Desktop\ARM64\Internal\950xl.txt C:\UpdatedDrivers\Lumia-Drivers-XXXX\ I:\

  • Reboot the device, the device will now begin PnP setup once again, and hopefully you will be back soon enough to your desktop

How to install Windows Desktop on internal Storage

Hardware specific defects

  • A considerable amount of Lumia 950 and Lumia 950 XL devices do not work with the HP lapdock properly when using a wired connection

General software defects

  • Cameras are not available

  • Windows Hello Iris Scanner is not available

  • Hyper-V is not available

  • SD Card Boot is not available

  • Battery life is degraded

  • GPS stack is not using any sensor for navigation

  • Miracast is not functional with many wireless devices, but works fine on Xbox, and Windows 10 computers

  • Graphical glitches can be observed with acrylic effects on builds lower or equal than 20100

  • Graphical glitches can be observed on shadows

  • MTP may fail to start if the device is plugged a second time if the NcsdService is enabled, stop the NcsdService to fix the issue via task manager

  • Dual SIM devices are unsupported for Cellular, do not expect cellular to work properly on these

  • DirectX is unavailable for x86 and amd64 applications

  • Microphone level under Settings is stuck at 50%

  • Phone may not boot reliably or have random reboots when the battery falls below 50% on certain devices, if all cores are enabled. Especially if the battery is counterfeit or worn out.
    As a workaround, you can run "bcdedit /set numproc 4" to disable the second core cluster

  • No VoLTE

  • No VoWiFi

  • No Cellular data sharing

  • Phone Calls require manual provisioning by the user on builds higher than 18908

  • Text messages are unavailable on builds higher then 18908

  • Some users might end up being unable to send texts on build 18908 and lower. To address this issue, open regedit on
    the device, go to HKLM\SOFTWARE\Microsoft\Messaging\IMEISpecific (or IMSISpecific), right click, go to security
    Tap advanced, tap change owner, in the dialog that opens, enter "Everyone" (without the quotes), tap check names
    press ok, press ok. Tap ALL APPLICATION PACKAGES, select 'full control', do the same for other listed accounts (optionally)
    Apply, and close regedit.

  • An APN might be required to specify for some users in order to get cellular data working.

  • Cellular is unavailable on builds lower than 17672.

  • Some drivers and mainly sensors will not be working on RS3 (16299).

  • Current issues with glance screen:

When the glance screen times out after the time specified there's a chance the screen won't turn off, this is still needing investigation but the issue can only be two things:
— either the device got out of S0ix and is sleeping at a lower level, because wifi is not connected for example, as a result the glance service is unable to take actions, this is a problem
— or, the glance service is trying to clear the screen, (there's a specific panel driver command to do so), and for some reason this is failing.
This specific issue might take some time to completely iron out.

The following status notifications are not implemented in the port/non functional in the wrapper libraries:
— Battery saver indication
— Ringer indication (vibrate on, silence on)
— Alarm indication
— Detailed text indication
— Notification badges

The following functionality is not implemented:
— Wake glance on single tap

Deprecation notice

  • Support for Build 18363 has ended, we cannot guarentee anymore that things will continue to work due to ongoing testing being halted.
    18363 and lower are over 3 years old. Please upgrade to 19041 or higher.

  • Night light is broken on 18363 and lower [Won't fix, <= 18363 is deprecated, see above]

Windows 10/11 software defects

  • Applications do not get installed if the user reboots the device on first boot before completion or if the date and time settings are incorrect during OOBE (Out Of Box Experience).
    As a workaround, find the "Second Party Application Provisioner" application in the start menu, right click, run as administrator
  • System reset is not supported
  • First boot can have bad thermal performance due to Windows initial app installation.
    While leaving the phone plugged in to a wall charger, let it install all applications, all app updates through the store, and OneDrive. Then let the phone cool down

Windows 10X software defects

NOTE: Windows 10X is a dead Operating System currently and we have no plans to offer images ourselves anymore. We believe those who still want to go this way should be able
to build an image themselves with the content we provide under the adaptationkit directory.

  • Vibration is unavailable
  • Under certain circumstances, Windows may fail booting on talkman devices when AutoChk runs (repairing drive at boot). If this is your case, let the device reboot a couple of times, or reflash the FFU file til the issue vanishes
  • Second Party Apps are not available
  • Cellular data is unavailable

Bug reporting

This release is a Preview release. Bug exists and may happen. If you notice a bug not present in the following bug list, please report them on our Telegram Group.

-- WOA-Project Team

Assets 33
Loading

Version 2108.58

18 Aug 13:49
@gus33000 gus33000
v2108.58
9dafefa
Compare
Choose a tag to compare
Version 2108.58

Lumia Drivers BSP - Version 2108.58 (Prussian Blue)

Released: 08/18/2021 03:30 PM UTC+2

Quality: Stable

Important installation notes

image

Please make sure your battery is fully charged before installing this driver pack. For most batteries the charge must be 100% as the phone may shutdown during setup if the battery is even at 80% charge.
Make sure battery is charged to 100% before continuing. If this is not the case, reboot your device now and charge it in an Operating System.

Reminder: if you are using WOA Deployer, please do not use the "Force Dual Boot" button, otherwise the setup process
will FAIL.

Release notes

Changelog

  • Updated LTE Coexistance Manager for 8992 and 8994 Platforms (Critical)

    Expect better thermals battery life and more with WiFi turned on.

  • Updated Mobile Networking Service (Critical)

    Resolved an issue where ICan0/ICan1 changes would revert on builds higher or equal than 18908

  • Updated PEP configuration and PoFx configuration for 8992 and 8994 Platforms (Critical)

    Resolved an issue where incorrect PoFx settings would be applied and as a result Windows would not allow Modern Standby
    to properly operate on the device

  • Updated Color Profile Service

    Resolved an issue where the color profile would not get applied under some specific conditions

  • Updated NCSd

    Service is now disabled by default due to issues and low usages, now MTP (Media Transfer Protocol, the technology
    that enables you to transfer files from your phone to your pc) will always work reliably without having to restart
    said service.

  • Updated assets for MTP and Device Stage

    Assets now represent the current state of the project

  • Updated Side Interaction stack for Prototype devices that support it

    No further documentation is made currently available.

  • Updated Dialer to resolve an UI issue with in the call page

How to offline update an existing Windows Desktop installation

  • Switch the device into mass storage.

  • Take note of the drive letter the Windows partition is using, here we will assume it got mounted as I:

  • Download [Lumia-Drivers-Full.zip] from https://github.com/WOA-Project/Lumia-Drivers/releases/latest

  • Extract said zip file to a folder of your choice, we will assume here we extracted it to C:\UpdatedDrivers

  • Download the DriverUpdater utility from https://github.com/WOA-Project/DriverUpdater/releases/latest

  • Open a command prompt as administrator, where the driver utility got downloaded

  • If your device is a Lumia 950, execute the following command:

    DriverUpdater.exe C:\UpdatedDrivers\Lumia-Drivers-XXXX\definitions\Desktop\ARM64\Internal\950.txt C:\UpdatedDrivers\Lumia-Drivers-XXXX\ I:\

  • If your device is a Lumia 950 XL, execute the following command:

    DriverUpdater.exe C:\UpdatedDrivers\Lumia-Drivers-XXXX\definitions\Desktop\ARM64\Internal\950xl.txt C:\UpdatedDrivers\Lumia-Drivers-XXXX\ I:\

  • Reboot the device, the device will now begin PnP setup once again, and hopefully you will be back soon enough to your desktop

How to install Windows Desktop on internal Storage

Hardware specific defects

  • A considerable amount of Lumia 950 and Lumia 950 XL devices do not work with the HP lapdock properly when using a wired connection

General software defects

  • Cameras are not available

  • Windows Hello Iris Scanner is not available

  • Hyper-V is not available

  • SD Card Boot is not available

  • Battery life is degraded

  • GPS stack is not using any sensor for navigation

  • Miracast is not functional with many wireless devices, but works fine on Xbox, and Windows 10 computers

  • Graphical glitches can be observed with acrylic effects on builds lower or equal than 20100

  • Graphical glitches can be observed on shadows

  • MTP may fail to start if the device is plugged a second time if the NcsdService is enabled, stop the NcsdService to fix the issue via task manager

  • Dual SIM devices are unsupported for Cellular, do not expect cellular to work properly on these

  • DirectX is unavailable for x86 and amd64 applications

  • Microphone level under Settings is stuck at 50%

  • Phone may not boot reliably or have random reboots when the battery falls below 50% on certain devices, if all cores are enabled. Especially if the battery is counterfeit or worn out.
    As a workaround, you can run "bcdedit /set numproc 4" to disable the second core cluster

  • No VoLTE

  • No VoWiFi

  • No Cellular data sharing

  • Phone Calls require manual provisioning by the user on builds higher than 18908

  • Text messages are unavailable on builds higher then 18908

  • Some users might end up being unable to send texts on build 18908 and lower. To address this issue, open regedit on
    the device, go to HKLM\SOFTWARE\Microsoft\Messaging\IMEISpecific (or IMSISpecific), right click, go to security
    Tap advanced, tap change owner, in the dialog that opens, enter "Everyone" (without the quotes), tap check names
    press ok, press ok. Tap ALL APPLICATION PACKAGES, select 'full control', do the same for other listed accounts (optionally)
    Apply, and close regedit.

  • An APN might be required to specify for some users in order to get cellular data working.

  • Cellular is unavailable on builds lower than 17672.

  • Some drivers and mainly sensors will not be working on RS3 (16299).

  • Current issues with glance screen:

When the glance screen times out after the time specified there's a chance the screen won't turn off, this is still needing investigation but the issue can only be two things:
— either the device got out of S0ix and is sleeping at a lower level, because wifi is not connected for example, as a result the glance service is unable to take actions, this is a problem
— or, the glance service is trying to clear the screen, (there's a specific panel driver command to do so), and for some reason this is failing.
This specific issue might take some time to completely iron out.

The following status notifications are not implemented in the port/non functional in the wrapper libraries:
— Battery saver indication
— Ringer indication (vibrate on, silence on)
— Alarm indication
— Detailed text indication
— Notification badges

The following functionality is not implemented:
— Wake glance on single tap

Deprecation notice

  • Support for Build 18363 has ended, we cannot guarentee anymore that things will continue to work due to ongoing testing being halted.
    18363 and lower are over 3 years old. Please upgrade to 19041 or higher.

  • Night light is broken on 18363 and lower [Won't fix, <= 18363 is deprecated, see above]

Windows 10/11 software defects

  • Applications do not get installed if the user reboots the device on first boot before completion or if the date and time settings are incorrect during OOBE (Out Of Box Experience).
    As a workaround, find the "Second Party Application Provisioner" application in the start menu, right click, run as administrator
  • System reset is not supported
  • First boot can have bad thermal performance due to Windows initial app installation.
    While leaving the phone plugged in to a wall charger, let it install all applications, all app updates through the store, and OneDrive. Then let the phone cool down

Windows 10X software defects

NOTE: Windows 10X is a dead Operating System currently and we have no plans to offer images ourselves anymore. We believe those who still want to go this way should be able
to build an image themselves with the content we provide under the adaptationkit directory.

  • Vibration is unavailable
  • Under certain circumstances, Windows may fail booting on talkman devices when AutoChk runs (repairing drive at boot). If this is your case, let the device reboot a couple of times, or reflash the FFU file til the issue vanishes
  • Second Party Apps are not available
  • Cellular data is unavailable

Bug reporting

This release is a Preview release. Bug exists and may happen. If you notice a bug not present in the following bug list, please report them on our Telegram Group.

-- WOA-Project Team

Assets 33
Loading

Version 2108.44

13 Aug 16:44
@gus33000 gus33000
v2108.44
b3c0f91
Compare
Choose a tag to compare
Version 2108.44

Lumia Drivers BSP - Version 2108.44 (Prussian Blue)

Released: 08/13/2021 06:00 PM UTC+1

Quality: Preview

Important installation notes

image

Please make sure your battery is fully charged before installing this driver pack. For most batteries the charge must be 100% as the phone may shutdown during setup if the battery is even at 80% charge.
Make sure battery is charged to 100% before continuing. If this is not the case, reboot your device now and charge it in an Operating System.

Reminder: if you are using WOA Deployer, please do not use the "Force Dual Boot" button, otherwise the setup process
will FAIL.

Release notes

Changelog

  • Updated Mobile Ambient Light Service and Mobile Automatic Rotation Service (Critical)

    Both services were locking up the device sensors preventing the device from going into Modern Standby states

    Battery life, thermals, and responsiveness should be improved as a result of this update while the device sleeps.

How to offline update an existing Windows Desktop installation

  • Switch the device into mass storage.

  • Take note of the drive letter the Windows partition is using, here we will assume it got mounted as I:

  • Download [Lumia-Drivers-Full.zip] from https://github.com/WOA-Project/Lumia-Drivers/releases/latest

  • Extract said zip file to a folder of your choice, we will assume here we extracted it to C:\UpdatedDrivers

  • Download the DriverUpdater utility from https://github.com/WOA-Project/DriverUpdater/releases/latest

  • Open a command prompt as administrator, where the driver utility got downloaded

  • If your device is a Lumia 950, execute the following command:

    DriverUpdater.exe C:\UpdatedDrivers\Lumia-Drivers-XXXX\definitions\Desktop\ARM64\Internal\950.txt C:\UpdatedDrivers\Lumia-Drivers-XXXX\ I:\

  • If your device is a Lumia 950 XL, execute the following command:

    DriverUpdater.exe C:\UpdatedDrivers\Lumia-Drivers-XXXX\definitions\Desktop\ARM64\Internal\950xl.txt C:\UpdatedDrivers\Lumia-Drivers-XXXX\ I:\

  • Reboot the device, the device will now begin PnP setup once again, and hopefully you will be back soon enough to your desktop

How to install Windows Desktop on internal Storage

Hardware specific defects

  • A considerable amount of Lumia 950 and Lumia 950 XL devices do not work with the HP lapdock properly when using a wired connection

General software defects

  • Under certain circumstances, the Lumia 950 (''Talkman'') may fail to reboot properly. Shut down the device via other means (Developer Menu / Flash App & THOR2). This happens during Setup, where the device will display a black screen

  • Cameras are not available

  • Windows Hello Iris Scanner is not available

  • Hyper-V is not available

  • SD Card Boot is not available

  • Battery life is degraded

  • GPS stack is not using any sensor for navigation

  • Miracast is not functional with many wireless devices, but works fine on Xbox, and Windows 10 computers

  • Graphical glitches can be observed with acrylic effects on builds lower or equal than 20100

  • Graphical glitches can be observed on shadows

  • MTP may fail to start if the device is plugged a second time, stop the NcsdService to fix the issue via task manager

  • Dual SIM devices are unsupported for Cellular, do not expect cellular to work properly on these

  • DirectX is unavailable for x86 and amd64 applications

  • Microphone level under Settings is stuck at 50%

  • Phone may not boot reliably or have random reboots when the battery falls below 50% on certain devices, if all cores are enabled.
    As a workaround, you can run "bcdedit /set numproc 4" to disable the second core cluster

  • No VoLTE

  • No VoWiFi

  • No Cellular data sharing

  • Phone Calls require manual provisioning by the user on builds higher than 18908

  • Text messages are unavailable on builds higher then 18908

  • Some users might end up being unable to send texts on build 18908 and lower. To address this issue, open regedit on
    the device, go to HKLM\SOFTWARE\Microsoft\Messaging\IMEISpecific (or IMSISpecific), right click, go to security
    Tap advanced, tap change owner, in the dialog that opens, enter "Everyone" (without the quotes), tap check names
    press ok, press ok. Tap ALL APPLICATION PACKAGES, select 'full control', do the same for other listed accounts (optionally)
    Apply, and close regedit.

  • An APN might be required to specify for some users in order to get cellular data working.

  • Cellular is unavailable on builds lower than 17672.

  • Some drivers and mainly sensors will not be working on RS3 (16299).

  • Current issues with glance screen:

When the glance screen times out after the time specified there's a chance the screen won't turn off, this is still needing investigation but the issue can only be two things:
— either the device got out of S0ix and is sleeping at a lower level, because wifi is not connected for example, as a result the glance service is unable to take actions, this is a problem
— or, the glance service is trying to clear the screen, (there's a specific panel driver command to do so), and for some reason this is failing.
This specific issue might take some time to completely iron out.

The following status notifications are not implemented in the port/non functional in the wrapper libraries:
— Battery saver indication
— Ringer indication (vibrate on, silence on)
— Alarm indication
— Detailed text indication
— Notification badges

The following functionality is not implemented:
— Wake glance on single tap

Deprecation notice

  • Support for Build 18363 has ended, we cannot guarentee anymore that things will continue to work due to ongoing testing being halted.
    18363 and lower are over 3 years old. Please upgrade to 19041 or higher.

  • Night light is broken on 18363 and lower [Won't fix, <= 18363 is deprecated, see above]

Windows 10 software defects

  • Applications do not get installed if the user reboots the device on first boot before completion or if the date and time settings are incorrect during OOBE (Out Of Box Experience).
    As a workaround, find the "Second Party Application Provisioner" application in the start menu, right click, run as administrator
  • System reset is not supported
  • First boot can have bad thermal performance due to Windows initial app installation.
    While leaving the phone plugged in to a wall charger, let it install all applications, all app updates through the store, and OneDrive. Then let the phone cool down

Windows 10X software defects

  • Vibration is unavailable
  • Under certain circumstances, Windows may fail booting on talkman devices when AutoChk runs (repairing drive at boot). If this is your case, let the device reboot a couple of times, or reflash the FFU file til the issue vanishes
  • Second Party Apps are not available
  • Cellular data is unavailable

Bug reporting

This release is a Preview release. Bug exists and may happen. If you notice a bug not present in the following bug list, please report them on our Telegram Group.

-- WOA-Project Team

Assets 33
Loading

Version 2108.42

13 Aug 08:23
@gus33000 gus33000
v2108.42
00cb314
Compare
Choose a tag to compare
Version 2108.42

Lumia Drivers BSP - Version 2108.42 (Prussian Blue)

Released: 08/13/2021 10:00 AM UTC+1

Quality: Preview

Important installation notes

image

Please make sure your battery is fully charged before installing this driver pack. For most batteries the charge must be 100% as the phone may shutdown during setup if the battery is even at 80% charge.
Make sure battery is charged to 100% before continuing. If this is not the case, reboot your device now and charge it in an Operating System.

Reminder: if you are using WOA Deployer, please do not use the "Force Dual Boot" button, otherwise the setup process
will FAIL.

Release notes

Changelog

  • Updated Processor Power Management Profiles for MSM8994 (Critical)

    Processor should behave better, wrong profiles accidentally made their way in a commit some time ago
    and the issue just got noticed.

  • Updated Dialer

  • Updated Chat

  • Updated Advanced Info

  • Updated Glance Screen Settings

  • Updated Gestures & Touch Settings

  • Updated Color Profile Settings

  • Updated Vibration Settings

  • Updated Phone Tips

  • Updated USB Function Switcher Settings

How to offline update an existing Windows Desktop installation

  • Switch the device into mass storage.

  • Take note of the drive letter the Windows partition is using, here we will assume it got mounted as I:

  • Download [Lumia-Drivers-Full.zip] from https://github.com/WOA-Project/Lumia-Drivers/releases/latest

  • Extract said zip file to a folder of your choice, we will assume here we extracted it to C:\UpdatedDrivers

  • Download the DriverUpdater utility from https://github.com/WOA-Project/DriverUpdater/releases/latest

  • Open a command prompt as administrator, where the driver utility got downloaded

  • If your device is a Lumia 950, execute the following command:

    DriverUpdater.exe C:\UpdatedDrivers\Lumia-Drivers-XXXX\definitions\Desktop\ARM64\Internal\950.txt C:\UpdatedDrivers\Lumia-Drivers-XXXX\ I:\

  • If your device is a Lumia 950 XL, execute the following command:

    DriverUpdater.exe C:\UpdatedDrivers\Lumia-Drivers-XXXX\definitions\Desktop\ARM64\Internal\950xl.txt C:\UpdatedDrivers\Lumia-Drivers-XXXX\ I:\

  • Reboot the device, the device will now begin PnP setup once again, and hopefully you will be back soon enough to your desktop

How to install Windows Desktop on internal Storage

Hardware specific defects

  • A considerable amount of Lumia 950 and Lumia 950 XL devices do not work with the HP lapdock properly when using a wired connection

General software defects

  • Under certain circumstances, the Lumia 950 (''Talkman'') may fail to reboot properly. Shut down the device via other means (Developer Menu / Flash App & THOR2). This happens during Setup, where the device will display a black screen

  • Cameras are not available

  • Windows Hello Iris Scanner is not available

  • Hyper-V is not available

  • SD Card Boot is not available

  • Battery life is degraded

  • GPS stack is not using any sensor for navigation

  • Miracast is not functional with many wireless devices, but works fine on Xbox, and Windows 10 computers

  • Graphical glitches can be observed with acrylic effects on builds lower or equal than 20100

  • Graphical glitches can be observed on shadows

  • MTP may fail to start if the device is plugged a second time, stop the NcsdService to fix the issue via task manager

  • Dual SIM devices are unsupported for Cellular, do not expect cellular to work properly on these

  • DirectX is unavailable for x86 and amd64 applications

  • Microphone level under Settings is stuck at 50%

  • Phone may not boot reliably or have random reboots when the battery falls below 50% on certain devices, if all cores are enabled.
    As a workaround, you can run "bcdedit /set numproc 4" to disable the second core cluster

  • No VoLTE

  • No VoWiFi

  • No Cellular data sharing

  • Phone Calls require manual provisioning by the user on builds higher than 18908

  • Text messages are unavailable on builds higher then 18908

  • Some users might end up being unable to send texts on build 18908 and lower. To address this issue, open regedit on
    the device, go to HKLM\SOFTWARE\Microsoft\Messaging\IMEISpecific (or IMSISpecific), right click, go to security
    Tap advanced, tap change owner, in the dialog that opens, enter "Everyone" (without the quotes), tap check names
    press ok, press ok. Tap ALL APPLICATION PACKAGES, select 'full control', do the same for other listed accounts (optionally)
    Apply, and close regedit.

  • An APN might be required to specify for some users in order to get cellular data working.

  • Cellular is unavailable on builds lower than 17672.

  • Some drivers and mainly sensors will not be working on RS3 (16299).

  • Current issues with glance screen:

When the glance screen times out after the time specified there's a chance the screen won't turn off, this is still needing investigation but the issue can only be two things:
— either the device got out of S0ix and is sleeping at a lower level, because wifi is not connected for example, as a result the glance service is unable to take actions, this is a problem
— or, the glance service is trying to clear the screen, (there's a specific panel driver command to do so), and for some reason this is failing.
This specific issue might take some time to completely iron out.

The following status notifications are not implemented in the port/non functional in the wrapper libraries:
— Battery saver indication
— Ringer indication (vibrate on, silence on)
— Alarm indication
— Detailed text indication
— Notification badges

The following functionality is not implemented:
— Wake glance on single tap

Deprecation notice

  • Support for Build 18363 has ended, we cannot guarentee anymore that things will continue to work due to ongoing testing being halted.
    18363 and lower are over 3 years old. Please upgrade to 19041 or higher.

  • Night light is broken on 18363 and lower [Won't fix, <= 18363 is deprecated, see above]

Windows 10 software defects

  • Applications do not get installed if the user reboots the device on first boot before completion or if the date and time settings are incorrect during OOBE (Out Of Box Experience).
    As a workaround, find the "Second Party Application Provisioner" application in the start menu, right click, run as administrator
  • System reset is not supported
  • First boot can have bad thermal performance due to Windows initial app installation.
    While leaving the phone plugged in to a wall charger, let it install all applications, all app updates through the store, and OneDrive. Then let the phone cool down

Windows 10X software defects

  • Vibration is unavailable
  • Under certain circumstances, Windows may fail booting on talkman devices when AutoChk runs (repairing drive at boot). If this is your case, let the device reboot a couple of times, or reflash the FFU file til the issue vanishes
  • Second Party Apps are not available
  • Cellular data is unavailable

Bug reporting

This release is a Preview release. Bug exists and may happen. If you notice a bug not present in the following bug list, please report them on our Telegram Group.

-- WOA-Project Team

Assets 33
Loading

Version 2107.12

04 Jul 22:11
@gus33000 gus33000
v2107.12
ec8f864
Compare
Choose a tag to compare
Version 2107.12

Lumia Drivers BSP - Version 2107.12

Released: 07/04/2021 11:00 PM UTC+1

Quality: Preview

Important installation notes

image

Please make sure your battery is fully charged before installing this driver pack. For most batteries the charge must be 100% as the phone may shutdown during setup if the battery is even at 80% charge.
Make sure battery is charged to 100% before continuing. If this is not the case, reboot your device now and charge it in an Operating System.

Reminder: if you are using WOA Deployer, please do not use the "Force Dual Boot" button, otherwise the setup process
will FAIL.

Release notes

Changelog

  • FactoryOS (22000.1) support
  • General updates to built in applications for Windows 11
  • Removes custom theme on clean installs
  • Addresses an issue with the Dialer application on Windows 11

How to offline update an existing Windows Desktop installation

  • Switch the device into mass storage.

  • Take note of the drive letter the Windows partition is using, here we will assume it got mounted as I:

  • Download [Lumia-Drivers-Full.zip] from https://github.com/WOA-Project/Lumia-Drivers/releases/latest

  • Extract said zip file to a folder of your choice, we will assume here we extracted it to C:\UpdatedDrivers

  • Download the DriverUpdater utility from https://github.com/WOA-Project/DriverUpdater/releases/latest

  • Open a command prompt as administrator, where the driver utility got downloaded

  • If your device is a Lumia 950, execute the following command:

    DriverUpdater.exe C:\UpdatedDrivers\Lumia-Drivers-XXXX\definitions\Desktop\ARM64\Internal\950.txt C:\UpdatedDrivers\Lumia-Drivers-XXXX\ I:\

  • If your device is a Lumia 950 XL, execute the following command:

    DriverUpdater.exe C:\UpdatedDrivers\Lumia-Drivers-XXXX\definitions\Desktop\ARM64\Internal\950xl.txt C:\UpdatedDrivers\Lumia-Drivers-XXXX\ I:\

  • Reboot the device, the device will now begin PnP setup once again, and hopefully you will be back soon enough to your desktop

How to install Windows Desktop on internal Storage

Hardware specific defects

  • A considerable amount of Lumia 950 and Lumia 950 XL devices do not work with the HP lapdock properly when using a wired connection

General software defects

  • Under certain circumstances, the Lumia 950 (''Talkman'') may fail to reboot properly. Shut down the device via other means (Developer Menu / Flash App & THOR2). This happens during Setup, where the device will display a black screen

  • Cameras are not available

  • Windows Hello Iris Scanner is not available

  • Hyper-V is not available

  • SD Card Boot is not available

  • Battery life is degraded

  • GPS stack is not using any sensor for navigation

  • Miracast is not functional with many wireless devices, but works fine on Xbox, and Windows 10 computers

  • Graphical glitches can be observed with acrylic effects on builds lower or equal than 20100

  • Graphical glitches can be observed on shadows

  • MTP may fail to start if the device is plugged a second time, stop the NcsdService to fix the issue via task manager

  • Dual SIM devices are unsupported for Cellular, do not expect cellular to work properly on these

  • DirectX is unavailable for x86 and amd64 applications

  • Microphone level under Settings is stuck at 50%

  • Phone may not boot reliably or have random reboots when the battery falls below 50% on certain devices, if all cores are enabled.
    As a workaround, you can run "bcdedit /set numproc 4" to disable the second core cluster

  • No VoLTE

  • No VoWiFi

  • No Cellular data sharing

  • Phone Calls require manual provisioning by the user on builds higher than 18908

  • Text messages are unavailable on builds higher then 18908

  • Some users might end up being unable to send texts on build 18908 and lower. To address this issue, open regedit on
    the device, go to HKLM\SOFTWARE\Microsoft\Messaging\IMEISpecific (or IMSISpecific), right click, go to security
    Tap advanced, tap change owner, in the dialog that opens, enter "Everyone" (without the quotes), tap check names
    press ok, press ok. Tap ALL APPLICATION PACKAGES, select 'full control', do the same for other listed accounts (optionally)
    Apply, and close regedit.

  • An APN might be required to specify for some users in order to get cellular data working.

  • Cellular is unavailable on builds lower than 17672.

  • Some drivers and mainly sensors will not be working on RS3 (16299).

  • Current issues with glance screen:

When the glance screen times out after the time specified there's a chance the screen won't turn off, this is still needing investigation but the issue can only be two things:
— either the device got out of S0ix and is sleeping at a lower level, because wifi is not connected for example, as a result the glance service is unable to take actions, this is a problem
— or, the glance service is trying to clear the screen, (there's a specific panel driver command to do so), and for some reason this is failing.
This specific issue might take some time to completely iron out.

The following status notifications are not implemented in the port/non functional in the wrapper libraries:
— Battery saver indication
— Ringer indication (vibrate on, silence on)
— Alarm indication
— Detailed text indication
— Notification badges

The following functionality is not implemented:
— Wake glance on single tap

Deprecation notice

  • Support for Build 18363 has ended, we cannot guarentee anymore that things will continue to work due to ongoing testing being halted.
    18363 and lower are over 3 years old. Please upgrade to 19041 or higher.

  • Night light is broken on 18363 and lower [Won't fix, <= 18363 is deprecated, see above]

Windows 10 software defects

  • Applications do not get installed if the user reboots the device on first boot before completion or if the date and time settings are incorrect during OOBE (Out Of Box Experience).
    As a workaround, find the "Second Party Application Provisioner" application in the start menu, right click, run as administrator
  • System reset is not supported
  • First boot can have bad thermal performance due to Windows initial app installation.
    While leaving the phone plugged in to a wall charger, let it install all applications, all app updates through the store, and OneDrive. Then let the phone cool down

Windows 10X software defects

  • Vibration is unavailable
  • Under certain circumstances, Windows may fail booting on talkman devices when AutoChk runs (repairing drive at boot). If this is your case, let the device reboot a couple of times, or reflash the FFU file til the issue vanishes
  • Second Party Apps are not available
  • Cellular data is unavailable

Bug reporting

This release is a Preview release. Bug exists and may happen. If you notice a bug not present in the following bug list, please report them on our Telegram Group.

-- WOA-Project Team

Assets 33
Loading

Version 2105.22

08 May 21:04
@gus33000 gus33000
v2105.22
e2086ea
Compare
Choose a tag to compare
Version 2105.22

Lumia Drivers BSP - Version 2105.1

Released: 05/08/2021 11:00 PM UTC+2

Quality: Preview

Important installation notes

image

Please make sure your battery is fully charged before installing this driver pack. For most batteries the charge must be 100% as the phone may shutdown during setup if the battery is even at 80% charge.
Make sure battery is charged to 100% before continuing. If this is not the case, reboot your device now and charge it in an Operating System.

Reminder: if you are using WOA Deployer, please do not use the "Force Dual Boot" button, otherwise the setup process
will FAIL.

Looking for pre-built FFU images?

  • Windows 10 Desktop (10.0.16299.2166) (en-US) (Lumia 950 XL)

https://threedots.ovh/storage/windows/RM1085_1078.0053.1067.0000.2105.0022.16299.2166_CLIENTPROFESSIONAL_a64fre_en-us_unsigned.ffu

  • Windows 10 Desktop (10.0.17134.2145) (en-US) (Lumia 950 XL)

https://threedots.ovh/storage/windows/RM1085_1078.0053.1067.0000.2105.0022.17134.2145_CLIENTPROFESSIONAL_a64fre_en-us_unsigned.ffu

  • Windows 10 Desktop (10.0.17763.1911) (en-US) (Lumia 950 XL)

https://threedots.ovh/storage/windows/RM1085_1078.0053.1067.0000.2105.0022.17763.1911_CLIENTPROFESSIONAL_a64fre_en-us_unsigned.ffu

  • Windows 10 Desktop (10.0.18363.1533) (en-US) (Lumia 950 XL)

https://threedots.ovh/storage/windows/RM1085_1078.0053.1067.0000.2105.0022.18363.1533_CLIENTPROFESSIONAL_a64fre_en-us_unsigned.ffu

  • Windows 10 Desktop (10.0.19043.962) (en-US) (Lumia 950 XL)

https://threedots.ovh/storage/windows/RM1085_1078.0053.1067.0000.2105.0022.19043.962_CLIENTPROFESSIONAL_a64fre_en-us_unsigned.ffu

  • Windows 10 Desktop (10.0.16299.2166) (en-US) (Lumia 950)

https://threedots.ovh/storage/windows/RM1104_1078.0053.1067.0000.2105.0022.16299.2166_CLIENTPROFESSIONAL_a64fre_en-us_unsigned.ffu

  • Windows 10 Desktop (10.0.17134.2145) (en-US) (Lumia 950)

https://threedots.ovh/storage/windows/RM1104_1078.0053.1067.0000.2105.0022.17134.2145_CLIENTPROFESSIONAL_a64fre_en-us_unsigned.ffu

  • Windows 10 Desktop (10.0.17763.1911) (en-US) (Lumia 950)

https://threedots.ovh/storage/windows/RM1104_1078.0053.1067.0000.2105.0022.17763.1911_CLIENTPROFESSIONAL_a64fre_en-us_unsigned.ffu

  • Windows 10 Desktop (10.0.18363.1533) (en-US) (Lumia 950)

https://threedots.ovh/storage/windows/RM1104_1078.0053.1067.0000.2105.0022.18363.1533_CLIENTPROFESSIONAL_a64fre_en-us_unsigned.ffu

  • Windows 10 Desktop (10.0.19043.962) (en-US) (Lumia 950)

https://threedots.ovh/storage/windows/RM1104_1078.0053.1067.0000.2105.0022.19043.962_CLIENTPROFESSIONAL_a64fre_en-us_unsigned.ffu

Release notes

Changelog

  • [ADDED] You can now get the unique ICan0 GUID value from the registry. For more information, see https://t.me/LumiaWOA_Announcements/257

  • You can now disable double tap to wake in the settings app.

  • General refactoring

  • Adds Icaros ESP camera drivers to the tree, replacing the previous stubs (COREBSPNT #104)

  • General improvements to the Lattice UC120 driver (N/A)

  • Implements keypad support to the digitizer driver (COREBSPNT #126)

  • Changes default settings for glance screen to not show the background by default (COREBSPNT #130)

  • Adds ARM32 specific definition files for ARMv8.0 devices that only had ARM64 before (COREBSPNT #123)

  • Split mobile bridge into sub services (COREBSPNT #102/103, GH #22/#12)

  • Modularized Services for cellular, audio, sensors, and panel.

  • Fixed 2 crash issues with the GPU driver and Camera AV Stream driver

  • Addresses an issue in glance where the service might stop when trying to initialize the InteropRPC interface (COREBSPNT #124)

  • Addresses an issue where the touch driver checked the wrong registry name for double tap to wake (COREBSPNT #126)

  • Addresses an issue where the touch settings app could not change the registry value for double tap to wake (COREBSPNT #126)

  • Addresses an issue where some HID collections for the touch driver were not properly registered with the operating system (COREBSPNT #127)

  • Addresses an issue where some drivers did not properly respect the DIRID 13 specification (still WIP across the tree) (COREBSPNT #102/103, GH #22/#12)

  • Addresses an issue where the phone might not register properly cable/charging events (COREBSPNT #128)

  • Addresses an issue where charging might be slow when plugging some charger types (COREBSPNT #128)

  • Addresses an issue where Cortana Activation did not work (COREBSPNT #125)

  • Addresses an issue where connected standby would not register properly due to a non PoFx registered device (digitizer power), replaces the previously stubbed driver with a proper implementation (COREBSPNT #126)

  • Addresses an issue where some devices like hapanero had broken touch with recent touch driver updates (COREBSPNT #126)

  • Addresses an issue with broken audio on 8994/2 (COREBSPNT #129)

  • Addresses an issue with broken OEMPanel settings on 8994/2 (COREBSPNT #129)

  • Addresses an issue where MTP might have been broken with recent updates (COREBSPNT #131)

  • Addresses an issue where the icon for MTP was broken (COREBSPNT #131)

  • Addresses an issue with ARM32 UWP apps not rendering properly

  • Addresses an issue with ColorProfile switching from action center puts invalid values in registry, breaking the settings app

  • Addresses an issue with Installation might fail with driverupdater when updating an already running system

  • Addresses an issue with Audio driver might install bootloop on newer builds

  • Addresses an issue with USBFN not working as it should

  • Addresses an issue with Touch settings app having an empty section

  • Addresses an issue with newer insider builds looping during install

  • Addresses an issue with NFC

  • Addresses an issue with ColorProfile toggle being grayed out (it's smart enough now so this shouldn't happen ever again)

  • Addresses an issue with DPI not changing

  • Addresses an issue with Camcore not installing

  • Addresses an issue with powersettings not applying

  • Addresses an issue with Conntected Standby

  • Addresses an issue with Alarms not functioning properly in standby

  • Addresses an issue with Cellular on old builds

How to offline update an existing Windows Desktop installation

  • Switch the device into mass storage.

  • Take note of the drive letter the Windows partition is using, here we will assume it got mounted as I:

  • Download [Lumia-Drivers-Full.zip] from https://github.com/WOA-Project/Lumia-Drivers/releases/latest

  • Extract said zip file to a folder of your choice, we will assume here we extracted it to C:\UpdatedDrivers

  • Download the DriverUpdater utility from https://github.com/WOA-Project/DriverUpdater/releases/latest

  • Open a command prompt as administrator, where the driver utility got downloaded

  • If your device is a Lumia 950, execute the following command:

    DriverUpdater.exe C:\UpdatedDrivers\Lumia-Drivers-XXXX\definitions\Desktop\ARM64\Internal\950.txt C:\UpdatedDrivers\Lumia-Drivers-XXXX\ I:\

  • If your device is a Lumia 950 XL, execute the following command:

    DriverUpdater.exe C:\UpdatedDrivers\Lumia-Drivers-XXXX\definitions\Desktop\ARM64\Internal\950xl.txt C:\UpdatedDrivers\Lumia-Drivers-XXXX\ I:\

  • Reboot the device, the device will now begin PnP setup once again, and hopefully you will be back soon enough to your desktop

How to install Windows Desktop on internal Storage

Hardware specific defects

  • A considerable amount of Lumia 950 and Lumia 950 XL devices do not work with the HP lapdock properly when using a wired connection

General software defects

  • Under certain circumstances, the Lumia 950 (''Talkman'') may fail to reboot properly. Shut down the device via other means (Developer Menu / Flash App & THOR2). This happens during Setup, where the device will display a black screen

  • Cameras are not available

  • Windows Hello Iris Scanner is not available

  • Hyper-V is not available

  • SD Card Boot is not available

  • Battery life is degraded

  • GPS stack is not using any sensor for navigation

  • Miracast is not functional with many wireless devices, but works fine on Xbox, and Windows 10 computers

  • Graphical glitches can be observed with acrylic effects on builds lower or equal than 20100

  • Graphical glitches can be observed on shadows

  • MTP may fail to start if the device is plugged a second time, stop the NcsdService to fix the issue via task manager

  • Dual SIM devices are unsupported for Cellular, do not expect cellular to work properly on these

  • DirectX is unavailable for x86 and amd64 applications

  • Microphone level under Settings is stuck at 50%

  • Phone may not boot reliably or have random reboots when the battery falls below 50% on certain devices, if all cores are enabled.
    As a workaround, you can run "bcdedit /set numproc 4" to disable the second core cluster

  • No VoLTE

  • No VoWiFi

  • No Cellular data sharing

  • Phone Calls require manual provisioning by the user on builds higher than 18908

  • Text messages are unavailable on builds higher then 18908

  • Some users might end up being unable to send texts o...

Read more
Assets 33
Loading

Version 2105.1

03 May 09:57
@gus33000 gus33000
v2105.1
515e4d7
Compare
Choose a tag to compare
Version 2105.1

Lumia Drivers BSP - Version 2105.1

Released: 05/03/2021 12:00 PM UTC+2
Updated (changelog): 05/04/2021 10:20 AM UTC+2

Quality: Preview

Important installation notes

image

Please make sure your battery is fully charged before installing this driver pack. For most batteries the charge must be 100% as the phone may shutdown during setup if the battery is even at 80% charge.
Make sure battery is charged to 100% before continuing. If this is not the case, reboot your device now and charge it in an Operating System.

Reminder: if you are using WOA Deployer, please do not use the "Force Dual Boot" button, otherwise the setup process
will FAIL.

Release notes

Changelog

  • You can now disable double tap to wake in the settings app.

  • General refactoring

  • Adds Icaros ESP camera drivers to the tree, replacing the previous stubs (COREBSPNT #104)

  • General improvements to the Lattice UC120 driver (N/A)

  • Implements keypad support to the digitizer driver (COREBSPNT #126)

  • Changes default settings for glance screen to not show the background by default (COREBSPNT #130)

  • Adds ARM32 specific definition files for ARMv8.0 devices that only had ARM64 before (COREBSPNT #123)

  • Split mobile bridge into sub services (COREBSPNT #102/103, GH #22/#12)

  • Modularized Services for cellular, audio, sensors, and panel.

  • Fixed 2 crash issues with the GPU driver and Camera AV Stream driver

  • Addresses an issue in glance where the service might stop when trying to initialize the InteropRPC interface (COREBSPNT #124)

  • Addresses an issue where the touch driver checked the wrong registry name for double tap to wake (COREBSPNT #126)

  • Addresses an issue where the touch settings app could not change the registry value for double tap to wake (COREBSPNT #126)

  • Addresses an issue where some HID collections for the touch driver were not properly registered with the operating system (COREBSPNT #127)

  • Addresses an issue where some drivers did not properly respect the DIRID 13 specification (still WIP across the tree) (COREBSPNT #102/103, GH #22/#12)

  • Addresses an issue where the phone might not register properly cable/charging events (COREBSPNT #128)

  • Addresses an issue where charging might be slow when plugging some charger types (COREBSPNT #128)

  • Addresses an issue where Cortana Activation did not work (COREBSPNT #125)

  • Addresses an issue where connected standby would not register properly due to a non PoFx registered device (digitizer power), replaces the previously stubbed driver with a proper implementation (COREBSPNT #126)

  • Addresses an issue where some devices like hapanero had broken touch with recent touch driver updates (COREBSPNT #126)

  • Addresses an issue with broken audio on 8994/2 (COREBSPNT #129)

  • Addresses an issue with broken OEMPanel settings on 8994/2 (COREBSPNT #129)

  • Addresses an issue where MTP might have been broken with recent updates (COREBSPNT #131)

  • Addresses an issue where the icon for MTP was broken (COREBSPNT #131)

  • Addresses an issue with ARM32 UWP apps not rendering properly

  • Addresses an issue with ColorProfile switching from action center puts invalid values in registry, breaking the settings app

  • Addresses an issue with Installation might fail with driverupdater when updating an already running system

  • Addresses an issue with Audio driver might install bootloop on newer builds

  • Addresses an issue with USBFN not working as it should

  • Addresses an issue with Touch settings app having an empty section

  • Addresses an issue with newer insider builds looping during install

  • Addresses an issue with NFC

  • Addresses an issue with ColorProfile toggle being grayed out (it's smart enough now so this shouldn't happen ever again)

  • Addresses an issue with DPI not changing

  • Addresses an issue with Camcore not installing

  • Addresses an issue with powersettings not applying

  • Addresses an issue with Conntected Standby

  • Addresses an issue with Alarms not functioning properly in standby

  • Addresses an issue with Cellular on old builds

How to offline update an existing Windows Desktop installation

  • Switch the device into mass storage.

  • Take note of the drive letter the Windows partition is using, here we will assume it got mounted as I:

  • Download [Lumia-Drivers-Full.zip] from https://github.com/WOA-Project/Lumia-Drivers/releases/latest

  • Extract said zip file to a folder of your choice, we will assume here we extracted it to C:\UpdatedDrivers

  • Download the DriverUpdater utility from https://github.com/WOA-Project/DriverUpdater/releases/latest

  • Open a command prompt as administrator, where the driver utility got downloaded

  • If your device is a Lumia 950, execute the following command:

    DriverUpdater.exe C:\UpdatedDrivers\Lumia-Drivers-XXXX\definitions\Desktop\ARM64\Internal\950.txt C:\UpdatedDrivers\Lumia-Drivers-XXXX\ I:\

  • If your device is a Lumia 950 XL, execute the following command:

    DriverUpdater.exe C:\UpdatedDrivers\Lumia-Drivers-XXXX\definitions\Desktop\ARM64\Internal\950xl.txt C:\UpdatedDrivers\Lumia-Drivers-XXXX\ I:\

  • Reboot the device, the device will now begin PnP setup once again, and hopefully you will be back soon enough to your desktop

How to install Windows Desktop on internal Storage

Hardware specific defects

  • A considerable amount of Lumia 950 and Lumia 950 XL devices do not work with the HP lapdock properly when using a wired connection

General software defects

  • Under certain circumstances, the Lumia 950 (''Talkman'') may fail to reboot properly. Shut down the device via other means (Developer Menu / Flash App & THOR2). This happens during Setup, where the device will display a black screen

  • Cameras are not available

  • Windows Hello Iris Scanner is not available

  • Hyper-V is not available

  • SD Card Boot is not available

  • Battery life is degraded

  • GPS stack is not using any sensor for navigation

  • Miracast is not functional with many wireless devices, but works fine on Xbox, and Windows 10 computers

  • Graphical glitches can be observed with acrylic effects on builds lower or equal than 20100

  • Graphical glitches can be observed on shadows

  • MTP may fail to start if the device is plugged a second time, stop the NcsdService to fix the issue via task manager

  • Dual SIM devices are unsupported for Cellular, do not expect cellular to work properly on these

  • DirectX is unavailable for x86 and amd64 applications

  • Microphone level under Settings is stuck at 50%

  • Phone may not boot reliably or have random reboots when the battery falls below 50% on certain devices, if all cores are enabled.
    As a workaround, you can run "bcdedit /set numproc 4" to disable the second core cluster

  • No VoLTE

  • No VoWiFi

  • No Cellular data sharing

  • Phone Calls require manual provisioning by the user on builds higher than 18908

  • Text messages are unavailable on builds higher then 18908

  • Some users might end up being unable to send texts on build 18908 and lower. To address this issue, open regedit on
    the device, go to HKLM\SOFTWARE\Microsoft\Messaging\IMEISpecific (or IMSISpecific), right click, go to security
    Tap advanced, tap change owner, in the dialog that opens, enter "Everyone" (without the quotes), tap check names
    press ok, press ok. Tap ALL APPLICATION PACKAGES, select 'full control', do the same for other listed accounts (optionally)
    Apply, and close regedit.

  • An APN might be required to specify for some users in order to get cellular data working.

  • Cellular is unavailable on builds lower than 17672.

  • Some drivers and mainly sensors will not be working on RS3 (16299).

  • Current issues with glance screen:

When the glance screen times out after the time specified there's a chance the screen won't turn off, this is still needing investigation but the issue can only be two things:
— either the device got out of S0ix and is sleeping at a lower level, because wifi is not connected for example, as a result the glance service is unable to take actions, this is a problem
— or, the glance service is trying to clear the screen, (there's a specific panel driver command to do so), and for some reason this is failing.
This specific issue might take some time to completely iron out.

The following status notifications are not implemented in the port/non functional in the wrapper libraries:
— Battery saver indication
— Ringer indication (vibrate on, silence on)
— Alarm indication
— Detailed text indication
— Notification badges

The following functionality is not implemented:
— Wake glance on single tap

Deprecation notice

  • Support for Build 18363 has ended, we cannot guarentee anymore that things will continue to work due to ongoing testing being halted.
    18363 and lower are over 3 years old. Please upgrade to 19041 or higher.

  • Night light is broken on 18363 and lower [Won't fix, <= 18363 is deprecated, see above]

__________________...

Read more
Assets 33
Loading

Version 2103.32

10 Mar 20:01
@gus33000 gus33000
v2103.32
424f241
Compare
Choose a tag to compare
Version 2103.32

Lumia Drivers BSP - Version 2103.32

Released: 03/10/2021 09:00 PM UTC+1

Quality: Interim

Important installation notes

image

Please make sure your battery is fully charged before installing this driver pack. For most batteries the charge must be 100% as the phone may shutdown during setup if the battery is even at 80% charge.
Make sure battery is charged to 100% before continuing. If this is not the case, reboot your device now and charge it in an Operating System.

Reminder: if you are using WOA Deployer, please do not use the "Force Dual Boot" button, otherwise the setup process
will FAIL.

Release notes

Changelog

image

  • Ported over glance screen. A couple of notes about glance screen in this release:

    Current issues with glance screen:

    • When the glance screen times out after the time specified there's a chance the screen won't turn off, this is still needing investigation but the issue can only be two things:
      — either the device got out of S0ix and is sleeping at a lower level, because wifi is not connected for example, as a result the glance service is unable to take actions, this is a problem
      — or, the glance service is trying to clear the screen, (there's a specific panel driver command to do so), and for some reason this is failing.
      This specific issue might take some time to completely iron out.

    • The following status notifications are not implemented in the port/non functional in the wrapper libraries:
      — Battery saver indication
      — Ringer indication (vibrate on, silence on)
      — Alarm indication
      — Detailed text indication
      — Notification badges

    • The following functionality is not implemented:
      — Wake glance on single tap

    To answer one main question we saw repeated a lot, (we did answer it in the discussion group that you probably want to join)

    • Yes, the clock moves vertically to prevent oled burnin, this feature is absent on OS Glance, which was introduced in Windows 10 Redstone 2, but is present in the old implementation, which is what this port uses

    • Yes, this is the original glance implementation by nokia ported over with wrapper libraries so it would work "fine"

      As a result, this means you do not have the 5 minutes timeout option that OS Glance had with Redstone 2

    • No, this is not the prerelease glance that had application/sdk support. Getting that one working is a bit more difficult, and wouldn't bring much different.

    • Are we thinking about making our own implementation?

      Yes we are kinda, mainly because of the timeout issue, if it doesn't manage to get fixed, we will have to roll our own implementation unfortunately. Also the battery saver indication issue might be tough to fix, currently it is NOP'd in the binary, but we would have to reimplement a windows phone winrt api to wrap this around

      For the other issues, we need to implement such functionality in the wrapper.

    • Syncing the background wallpaper is also a task that needs to be done, and might get tricky.

  • Fixed an issue impacting Color Profile toggle functionality in action center

  • Improvements to Color Profiles

image

  • General improvements to system applications. System applications are no longer present under the extras section of the settings application but instead can be found according to the following table:

    • Advanced Info => Bluetooth and other devices

    • Touch => Touch

    • Vibration => Notifications

    • USB Function Mode => USB

    • Color Profile => Display

    • Glance Screen => Lockscreen

  • A new touch settings app was introduced in this release, but is not yet functional

  • Removed the vidstream device from the default usb function configuration, as this could prevent power vetos

  • Other general bug fixes

How to offline update an existing Windows Desktop installation

  • Switch the device into mass storage.

  • Take note of the drive letter the Windows partition is using, here we will assume it got mounted as I:

  • Download [Lumia-Drivers-Full.zip] from https://github.com/WOA-Project/Lumia-Drivers/releases/latest

  • Extract said zip file to a folder of your choice, we will assume here we extracted it to C:\UpdatedDrivers

  • Download the DriverUpdater utility from https://github.com/WOA-Project/DriverUpdater/releases/latest

  • Open a command prompt as administrator, where the driver utility got downloaded

  • If your device is a Lumia 950, execute the following command:

    DriverUpdater.exe C:\UpdatedDrivers\Lumia-Drivers-XXXX\definitions\Desktop\Internal\950.txt C:\UpdatedDrivers\Lumia-Drivers-XXXX\ I:\

  • If your device is a Lumia 950 XL, execute the following command:

    DriverUpdater.exe C:\UpdatedDrivers\Lumia-Drivers-XXXX\definitions\Desktop\Internal\950xl.txt C:\UpdatedDrivers\Lumia-Drivers-XXXX\ I:\

  • Reboot the device, the device will now begin PnP setup once again, and hopefully you will be back soon enough to your desktop

How to install Windows Desktop on internal Storage

How to install Windows Desktop on an SD card

  • Insert your SD Card

  • Install Windows on the SD card like you would on any external storage media (some tools even exist that can do it for you ie Rufus)

  • Set TestSigning on the {bootloadersettings} object of BCD on the sd card

  • Setup BootShim/Lumia950XlPkg on the phone eMMC like you would on a traditional installation (You can download bootshim from here: https://dev.azure.com/LumiaWoA/Boot%20Shim/_build/results?buildId=174&view=results) (and the UEFI from here: https://github.com/WOA-Project/Lumia950XLPkg/releases)

  • Take note of the drive letter the Windows partition is using on the sd card, here we will assume it got mounted as I:

  • Download [Lumia-Drivers-Full.zip] from https://github.com/WOA-Project/Lumia-Drivers/releases/latest

  • Extract said zip file to a folder of your choice, we will assume here we extracted it to C:\UpdatedDrivers

  • Download the DriverUpdater utility from https://github.com/WOA-Project/DriverUpdater/releases/latest

  • Open a command prompt as administrator, where the driver utility got downloaded

  • If your device is a Lumia 950, execute the following command:

    DriverUpdater.exe C:\UpdatedDrivers\Lumia-Drivers-XXXX\definitions\Desktop\SDCard\950.txt C:\UpdatedDrivers\Lumia-Drivers-XXXX\ I:\

  • If your device is a Lumia 950 XL, execute the following command:

    DriverUpdater.exe C:\UpdatedDrivers\Lumia-Drivers-XXXX\definitions\Desktop\SDCard\950xl.txt C:\UpdatedDrivers\Lumia-Drivers-XXXX\ I:\

  • Reboot the device, boot into BootShim, let the UEFI load, and you should be able to boot from SD Card.

Hardware specific defects

  • A considerable amount of Lumia 950 and Lumia 950 XL devices do not work with the HP lapdock properly when using a wired connection

General software defects

  • Under certain circumstances, the Lumia 950 (''Talkman'') may fail to reboot properly. Shut down the device via other means (Developer Menu / Flash App & THOR2). This happens during Setup, where the device will display a black screen

  • Cameras are not available

  • Windows Hello Iris Scanner is not available

  • Hyper-V is not available

  • SD Card Boot is not available

  • Battery life is degraded

  • GPS stack is not using any sensor for navigation

  • Miracast is not functional with many wireless devices, but works fine on Xbox, and Windows 10 computers

  • Graphical glitches can be observed with acrylic effects on builds lower or equal than 20100

  • Graphical glitches can be observed on shadows

  • MTP may fail to start if the device is plugged a second time, stop the NcsdService to fix the issue via task manager

  • Dual SIM devices are unsupported for Cellular, do not expect cellular to work properly on these

  • DirectX is unavailable for x86 and amd64 applications

  • No VoLTE

  • No VoWiFi

  • No Cellular data sharing

  • Phone Calls require manual provisioning by the user on builds higher than 18363

  • Text messages are unavailable on builds higher then 18363

  • Microphone level under Settings is stuck at 50%

  • Phone may not boot reliably or have random reboots when the battery falls below 50% on certain devices, if all cores are enabled.
    As a workaround, you can run "bcdedit /set numproc 4" to disable the second core cluster

  • Some users might end up being unable to send texts on build 18908 and lower. To address this issue, open regedit on
    the device, go to HKLM\SOFTWARE\Microsoft\Messaging\IMEISpecific (or IMSISpecific), right click, go to security
    Tap advanced, tap change owner, in the dialog that opens, enter "Everyone" (without the quotes), tap check names
    press ok, press ok. Tap ALL APPLICATION PACKAGES, select 'full control', do the same for other listed a...

Read more
Assets 31
Loading

Version 2103.6

02 Mar 20:07
@gus33000 gus33000
v2103.6
3b0bf13
Compare
Choose a tag to compare
Version 2103.6

Lumia Drivers BSP - Version 2103.6

Released: 03/02/2021 09:00 PM UTC+1

Quality: Interim

Important installation notes

Please make sure your battery is fully charged before installing this driver pack. For most batteries the charge must be 100% as the phone may shutdown during setup if the battery is even at 80% charge.
Make sure battery is charged to 100% before continuing. If this is not the case, reboot your device now and charge it in an Operating System.

Reminder: if you are using WOA Deployer, please do not use the "Force Dual Boot" button, otherwise the setup process
will FAIL.

Release notes

Changelog

  • Addresses an issue impacting bootability for 1% of devices suffering from an eMMC quirk
  • Updates to the USB-C PHY Driver.
  • Updates to the Touch Driver.
  • Added Double Tap to wake functionality.

NEW issues

  • Some users might end up being unable to send texts on build 18908 and lower. To address this issue, open regedit on
    the device, go to HKLM\SOFTWARE\Microsoft\Messaging\IMEISpecific (or IMSISpecific), right click, go to security
    Tap advanced, tap change owner, in the dialog that opens, enter "Everyone" (without the quotes), tap check names
    press ok, press ok. Tap ALL APPLICATION PACKAGES, select 'full control', do the same for other listed accounts (optionally)
    Apply, and close regedit.

How to offline update an existing Windows Desktop installation

  • Switch the device into mass storage.

  • Take note of the drive letter the Windows partition is using, here we will assume it got mounted as I:

  • Download [Lumia-Drivers-Full.zip] from https://github.com/WOA-Project/Lumia-Drivers/releases/latest

  • Extract said zip file to a folder of your choice, we will assume here we extracted it to C:\UpdatedDrivers

  • Download the DriverUpdater utility from https://github.com/WOA-Project/DriverUpdater/releases/latest

  • Open a command prompt as administrator, where the driver utility got downloaded

  • If your device is a Lumia 950, execute the following command:

    DriverUpdater.exe C:\UpdatedDrivers\Lumia-Drivers-XXXX\definitions\Desktop\Internal\950.txt C:\UpdatedDrivers\Lumia-Drivers-XXXX\ I:\

  • If your device is a Lumia 950 XL, execute the following command:

    DriverUpdater.exe C:\UpdatedDrivers\Lumia-Drivers-XXXX\definitions\Desktop\Internal\950xl.txt C:\UpdatedDrivers\Lumia-Drivers-XXXX\ I:\

  • Reboot the device, the device will now begin PnP setup once again, and hopefully you will be back soon enough to your desktop

How to install Windows Desktop on internal Storage

How to install Windows Desktop on an SD card

  • Insert your SD Card

  • Install Windows on the SD card like you would on any external storage media (some tools even exist that can do it for you ie Rufus)

  • Set TestSigning on the {bootloadersettings} object of BCD on the sd card

  • Setup BootShim/Lumia950XlPkg on the phone eMMC like you would on a traditional installation

  • Take note of the drive letter the Windows partition is using on the sd card, here we will assume it got mounted as I:

  • Download [Lumia-Drivers-Full.zip] from https://github.com/WOA-Project/Lumia-Drivers/releases/latest

  • Extract said zip file to a folder of your choice, we will assume here we extracted it to C:\UpdatedDrivers

  • Download the DriverUpdater utility from https://github.com/WOA-Project/DriverUpdater/releases/latest

  • Open a command prompt as administrator, where the driver utility got downloaded

  • If your device is a Lumia 950, execute the following command:

    DriverUpdater.exe C:\UpdatedDrivers\Lumia-Drivers-XXXX\definitions\Desktop\SDCard\950.txt C:\UpdatedDrivers\Lumia-Drivers-XXXX\ I:\

  • If your device is a Lumia 950 XL, execute the following command:

    DriverUpdater.exe C:\UpdatedDrivers\Lumia-Drivers-XXXX\definitions\Desktop\SDCard\950xl.txt C:\UpdatedDrivers\Lumia-Drivers-XXXX\ I:\

  • Reboot the device, boot into BootShim, let the UEFI load, and you should be able to boot from SD Card.

Hardware specific defects

  • A considerable amount of Lumia 950 and Lumia 950 XL devices do not work with the HP lapdock properly when using a wired connection

General software defects

  • Under certain circumstances, the Lumia 950 (''Talkman'') may fail to reboot properly. Shut down the device via other means (Developer Menu / Flash App & THOR2). This happens during Setup, where the device will display a black screen
  • Cameras are not available
  • Windows Hello Iris Scanner is not available
  • Hyper-V is not available
  • SD Card Boot is not available
  • Battery life is degraded
  • GPS stack is not using any sensor for navigation
  • Miracast is not functional with many wireless devices, but works fine on Xbox, and Windows 10 computers
  • Graphical glitches can be observed with acrylic effects on builds lower or equal than 20100
  • Graphical glitches can be observed on shadows
  • MTP may fail to start if the device is plugged a second time, stop the NcsdService to fix the issue via task manager
  • Dual SIM devices are unsupported for Cellular, do not expect cellular to work properly on these
  • DirectX is unavailable for x86 and amd64 applications
  • No VoLTE
  • No VoWiFi
  • No Cellular data sharing
  • Phone Calls require manual provisioning by the user on builds higher than 18363
  • Text messages are unavailable on builds higher then 18363
  • Microphone level under Settings is stuck at 50%
  • Phone may not boot reliably or have random reboots when the battery falls below 50% on certain devices, if all cores are enabled.
    As a workaround, you can run "bcdedit /set numproc 4" to disable the second core cluster

Deprecation notice

  • Support for Build 18363 has ended, we cannot guarentee anymore that things will continue to work due to ongoing testing being halted.
    18363 and lower are over 3 years old. Please upgrade to 19041 or higher.

  • Build 17763 is deprecated and will not boot successfully anymore [<= 18363 is deprecated, see above]

  • Volume / Audio switching is broken on 18363 [Won't fix, <= 18363 is deprecated, see above]

  • Night light is broken on 18363 [Won't fix, <= 18363 is deprecated, see above]

Windows 10 software defects

  • Applications do not get installed if the user reboots the device on first boot before completion.
    As a workaround, find the "Second Party Application Provisioner" application in the start menu, right click, run as administrator
  • System reset is not supported
  • First boot can have bad thermal performance due to Windows initial app installation.
    While leaving the phone plugged in to a wall charger, let it install all applications, all app updates through the store, and OneDrive. Then let the phone cool down

Windows 10X software defects

  • Vibration is unavailable
  • Under certain circumstances, Windows may fail booting on talkman devices when AutoChk runs (repairing drive at boot). If this is your case, let the device reboot a couple of times, or reflash the FFU file til the issue vanishes
  • Second Party Apps are not available
  • Cellular data is unavailable

Bug reporting

This release is a Preview release. Bug exists and may happen. If you notice a bug not present in the following bug list, please report them on our Telegram Group.

-- WOA-Project Team

Assets 31
Loading

Version 2102.75

21 Feb 19:55
@gus33000 gus33000
v2102.75
7682aab
Compare
Choose a tag to compare
Version 2102.75

Lumia Drivers BSP - Version 2102.75

Released: 02/21/2021 09:00 PM UTC+1

Quality: Interim

Release notes

Changelog

  • Addresses an issue impacting Cellular functionality
    (for people having updated to 2102.60 or higher before, we are sorry but you cannot upgrade to this release, you will have to redeploy).
  • Preparations for an upcoming update
  • Seems faster (TM)

NEW issues

  • A very slim percentage of users are experiencing SDBUS_INTERNAL_ERROR issues.
    If this is your case, go to mass storage mode, mount \Windows\System32\config\SYSTEM in regedit
    Set the following entries

    [HKEY_LOCAL_MACHINE\RTSYSTEM\ControlSet001\services\SdBus\Parameters]
    "DisableHS200Support"=dword:00000001
    "DisableHS400Support"=dword:00000001
    "DisableUhsSupport"=dword:00000001

    Unmount the registry hive, and reboot

  • Some users might end up being unable to send texts on build 18908 and lower. To address this issue, open regedit on
    the device, go to HKLM\SOFTWARE\Microsoft\Messaging\IMEISpecific (or IMSISpecific), right click, go to security
    Tap advanced, tap change owner, in the dialog that opens, enter "Everyone" (without the quotes), tap check names
    press ok, press ok. Tap ALL APPLICATION PACKAGES, select 'full control', do the same for other listed accounts (optionally)
    Apply, and close regedit.

How to offline update an existing Windows Desktop installation

  • Switch the device into mass storage.

  • Take note of the drive letter the Windows partition is using, here we will assume it got mounted as I:

  • Download [Source Code (zip)] from https://github.com/WOA-Project/Lumia-Drivers/releases/latest

  • Extract said zip file to a folder of your choice, we will assume here we extracted it to C:\UpdatedDrivers

  • Download the DriverUpdater utility from https://github.com/WOA-Project/DriverUpdater/releases/latest

  • Open a command prompt as administrator, where the driver utility got downloaded

  • If your device is a Lumia 950, execute the following command:

    DriverUpdater.exe C:\UpdatedDrivers\Lumia-Drivers-XXXX\definitions\Desktop\Internal\950.txt C:\UpdatedDrivers\Lumia-Drivers-XXXX\ I:\

  • If your device is a Lumia 950 XL, execute the following command:

    DriverUpdater.exe C:\UpdatedDrivers\Lumia-Drivers-XXXX\definitions\Desktop\Internal\950xl.txt C:\UpdatedDrivers\Lumia-Drivers-XXXX\ I:\

  • Reboot the device, the device will now begin PnP setup once again, and hopefully you will be back soon enough to your desktop

Hardware specific defects

  • A considerable amount of Lumia 950 and Lumia 950 XL devices do not work with the HP lapdock properly when using a wired connection

General software defects

  • Under certain circumstances, the Lumia 950 (''Talkman'') may fail to reboot properly. Shut down the device via other means (Developer Menu / Flash App & THOR2). This happens during Setup, where the device will display a black screen
  • Cameras are not available
  • Windows Hello Iris Scanner is not available
  • Hyper-V is not available
  • SD Card Boot is not available
  • Battery life is degraded
  • GPS stack is not using any sensor for navigation
  • Miracast is not functional with many wireless devices, but works fine on Xbox, and Windows 10 computers
  • Graphical glitches can be observed with acrylic effects on builds lower or equal than 20100
  • Graphical glitches can be observed on shadows
  • MTP may fail to start if the device is plugged a second time, stop the NcsdService to fix the issue via task manager
  • Dual SIM devices are unsupported for Cellular, do not expect cellular to work properly on these
  • DirectX is unavailable for x86 and amd64 applications
  • No VoLTE
  • No VoWiFi
  • No Cellular data sharing
  • Phone Calls require manual provisioning by the user on builds higher than 18363
  • Text messages are unavailable on builds higher then 18363
  • Microphone level under Settings is stuck at 50%
  • Phone may not boot reliably or have random reboots when the battery falls below 50% on certain devices, if all cores are enabled.
    As a workaround, you can run "bcdedit /set numproc 4" to disable the second core cluster

Deprecation notice

  • Support for Build 18363 has ended, we cannot guarentee anymore that things will continue to work due to ongoing testing being halted.
    18363 and lower are over 3 years old. Please upgrade to 19041 or higher.

  • Build 17763 is deprecated and will not boot successfully anymore [<= 18363 is deprecated, see above]

  • Volume / Audio switching is broken on 18363 [Won't fix, <= 18363 is deprecated, see above]

  • Night light is broken on 18363 [Won't fix, <= 18363 is deprecated, see above]

Windows 10 software defects

  • Applications do not get installed if the user reboots the device on first boot before completion.
    As a workaround, find the "Second Party Application Provisioner" application in the start menu, right click, run as administrator
  • System reset is not supported
  • First boot can have bad thermal performance due to Windows initial app installation.
    While leaving the phone plugged in to a wall charger, let it install all applications, all app updates through the store, and OneDrive. Then let the phone cool down

Windows 10X software defects

  • Vibration is unavailable
  • Under certain circumstances, Windows may fail booting on talkman devices when AutoChk runs (repairing drive at boot). If this is your case, let the device reboot a couple of times, or reflash the FFU file til the issue vanishes
  • Second Party Apps are not available
  • Cellular data is unavailable

Bug reporting

This release is a Preview release. Bug exists and may happen. If you notice a bug not present in the following bug list, please report them on our Telegram Group.

-- WOA-Project Team

Assets 31
Loading