Long story short, my sister gave two painted LPs.
So I decided to design a simple wall mount for them.
The whole mount can be installed to a wall by using a small nail or a small srew.
Please mind, the head of the nail or screw shouldn't be thicker than 1.2mm.
Also, you need 1 additional M3x6 screw to fit the two parts together. Where the thread length is 6mm.
STEP files of the parts are also available, so it should be easy to modify the parts to your needs.
Before printing, I recommend to print the LPW_Test_ScrewHole_M3 part once, to check if you can tighten the M3 screw into the screw hole.
The nominal diameter of the hole is 2.93mm, which works good for my printer and my slicer settings. Maybe you need another value to get a good fit. Feel free to modify the STEP files.
With my settings, which can be found in the Documentation folder the printing took:
- LPW_Mount: ~ 21 minutes
- LPW_Cap: ~ 6 minutes
My sister owns an Etsy shop.
If you like the painted LPs in the pics, you maybe like to give her shop a little visit.
Kathas Kreativstube