Asterisk-integration

Asterisk integration for Home Assistant

This integration finds and adds all SIP and PJSIP devices to your Home Assistant.

Roadmap

Things that are coming soon:

• Device triggers and conditions

I am open for suggestions!

Asterisk add-on

The Asterisk add-on fully supports this integration.

Requirements

For this to work you will need the following:

• A sip/pbx server. (I recommend the Asterisk add-on to get started)
• HACS on your Home Assistant.
• Create an AMI manager. Make sure your IP is allowed. (Add-on comes preconfigured for this)

Installation

Download using HACS

1. Go to HACS
2. Click on the 3 points in the upper right corner and click on Custom repositories
3. Paste https://github.com/TECH7Fox/Asterisk-integration/ into Add custom repository URL and by category choose Integration
4. Click on add and check if the repository is there.
5. You should now see Asterisk integration. Click INSTALL
6. Restart Home Assistant.
7. Go to integrations and find Asterisk.
8. Fill in the fields and click add. If succesful, you should now see your PJSIP/SIP devices.

Troubleshooting

Most problems is because your PBX server is not configured correct.

• For DTMF signalling to work, in FreePBX, change the dmtf signaling. For intercom purposes, "SIP-INFO DTMF-Relay" is needed.

If you are still having problems you can make an issue, ask on the discord server or send me a email.

Contact

jordy.kuhne@gmail.com