Visual Studio Code IntelliSense with DxCore

[nabelekt]

Hi, all. Has anyone here gotten IntelliSense to work relatively flawlessly in Visual Studio Code for DxCore projects? I've gotten most of the way, but still have some issues.

For me, any calls to Serial.printf() get marked with a red squiggly. Ctrl+clicking on printf shows me the definition just fine. Other things here and there have the same behavior. For example, va_start within the printf definition.

In addition to that, when verifying the sketch, I get:
[Error] Failed to read or write IntelliSense configuration: {}
Don't think it's a real problem, but it's annoying.

Here's my c_pp_properties.json file:

{
    "configurations": [
        {
            "name": "Win32",
            "includePath": [
                "${workspaceFolder}/**",
                "C:\\Users\\nabel\\OneDrive\\Documents\\ArduinoData\\packages\\DxCore\\hardware\\megaavr\\**",
                "C:\\Users\\nabel\\OneDrive\\Documents\\Arduino\\libraries\\**",
                "C:\\Program Files (x86)\\Arduino\\hardware\\arduino\\avr\\**",
                "C:\\Program Files (x86)\\Arduino\\hardware\\tools\\**",
                "C:\\Program Files (x86)\\Arduino\\tools\\**",
                "C:\\Program Files (x86)\\Arduino\\libraries\\**"
            ],
        "forcedInclude": [
            "C:\\Program Files (x86)\\Arduino\\hardware\\arduino\\avr\\cores\\arduino\\Arduino.h"
        ],
            "defines": [
                "_DEBUG",
                "UNICODE",
                "_UNICODE",
                "ARDUINO=10816", // Should be updated for version of Arduino IDE installed; https://stackoverflow.com/a/30928558
                "USBCON"
            ],
            "cStandard": "c17",
            "cppStandard": "c++17",
            "intelliSenseMode": "windows-msvc-x64"
        }
    ],
    "version": 4
}

If anyone has IntelliSense working well, could you share your c_pp_properties.json file?
Thanks!

[epccs]

I was using Linux and the Microchip toolchain for a DA project, my VS Code setup may give some clues.

https://github.com/epccs/MacGyver/blob/master/Applications/.vscode/

[nabelekt]

Looking at your setup, I think it's different enough that I won't be able to use much from it. But thanks for sharing!