sht3x_i2c.h

/*
 * THIS FILE IS AUTOMATICALLY GENERATED
 *
 * Generator:     sensirion-driver-generator 0.33.0
 * Product:       sht3x
 * Model-Version: 1.0.0
 */
/*
 * Copyright (c) 2023, Sensirion AG
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions are met:
 *
 * * Redistributions of source code must retain the above copyright notice, this
 *   list of conditions and the following disclaimer.
 *
 * * Redistributions in binary form must reproduce the above copyright notice,
 *   this list of conditions and the following disclaimer in the documentation
 *   and/or other materials provided with the distribution.
 *
 * * Neither the name of Sensirion AG nor the names of its
 *   contributors may be used to endorse or promote products derived from
 *   this software without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
 * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 * POSSIBILITY OF SUCH DAMAGE.
 */

#ifndef SHT3X_I2C_H
#define SHT3X_I2C_H

#ifdef __cplusplus
extern "C" {
#endif

#include "sensirion_config.h"
#define SHT30A_I2C_ADDR_44 0x44
#define SHT30A_I2C_ADDR_45 0x45
#define SHT30_I2C_ADDR_44 0x44
#define SHT30_I2C_ADDR_45 0x45
#define SHT31A_I2C_ADDR_44 0x44
#define SHT31A_I2C_ADDR_45 0x45
#define SHT31_I2C_ADDR_44 0x44
#define SHT31_I2C_ADDR_45 0x45
#define SHT33_I2C_ADDR_44 0x44
#define SHT33_I2C_ADDR_45 0x45
#define SHT35A_I2C_ADDR_44 0x44
#define SHT35A_I2C_ADDR_45 0x45
#define SHT35_I2C_ADDR_44 0x44
#define SHT35_I2C_ADDR_45 0x45

typedef enum {
    MEASURE_SINGLE_SHOT_HIGH_REPEATABILITY_CMD_ID = 0x2400,
    MEASURE_SINGLE_SHOT_HIGH_REPEATABILITY_CLOCK_STRETCHING_CMD_ID = 0x2c06,
    MEASURE_SINGLE_SHOT_MEDIUM_REPEATABILITY_CMD_ID = 0x240b,
    MEASURE_SINGLE_SHOT_MEDIUM_REPEATABILITY_CLOCK_STRETCHING_CMD_ID = 0x2c0d,
    MEASURE_SINGLE_SHOT_LOW_REPEATABILITY_CMD_ID = 0x2416,
    MEASURE_SINGLE_SHOT_LOW_REPEATABILITY_CLOCK_STRETCHING_CMD_ID = 0x2c10,
    START_MEASUREMENT_0_5_MPS_HIGH_REPEATABILITY_CMD_ID = 0x2032,
    START_MEASUREMENT_0_5_MPS_MEDIUM_REPEATABILITY_CMD_ID = 0x2024,
    START_MEASUREMENT_0_5_MPS_LOW_REPEATABILITY_CMD_ID = 0x202f,
    START_MEASUREMENT_1_MPS_HIGH_REPEATABILITY_CMD_ID = 0x2130,
    START_MEASUREMENT_1_MPS_MEDIUM_REPEATABILITY_CMD_ID = 0x2126,
    START_MEASUREMENT_1_MPS_LOW_REPEATABILITY_CMD_ID = 0x212d,
    START_MEASUREMENT_2_MPS_HIGH_REPEATABILITY_CMD_ID = 0x2236,
    START_MEASUREMENT_2_MPS_MEDIUM_REPEATABILITY_CMD_ID = 0x2220,
    START_MEASUREMENT_2_MPS_LOW_REPEATABILITY_CMD_ID = 0x222b,
    START_MEASUREMENT_4_MPS_HIGH_REPEATABILITY_CMD_ID = 0x2334,
    START_MEASUREMENT_4_MPS_MEDIUM_REPEATABILITY_CMD_ID = 0x2322,
    START_MEASUREMENT_4_MPS_LOW_REPEATABILITY_CMD_ID = 0x2329,
    START_MEASUREMENT_10_MPS_HIGH_REPEATABILITY_CMD_ID = 0x2737,
    START_MEASUREMENT_10_MPS_MEDIUM_REPEATABILITY_CMD_ID = 0x2721,
    START_MEASUREMENT_10_MPS_LOW_REPEATABILITY_CMD_ID = 0x273a,
    START_ART_MEASUREMENT_CMD_ID = 0x2b32,
    READ_MEASUREMENT_CMD_ID = 0xe000,
    STOP_MEASUREMENT_CMD_ID = 0x3093,
    ENABLE_HEATER_CMD_ID = 0x306d,
    DISABLE_HEATER_CMD_ID = 0x3066,
    READ_STATUS_REGISTER_CMD_ID = 0xf32d,
    CLEAR_STATUS_REGISTER_CMD_ID = 0x3041,
    SOFT_RESET_CMD_ID = 0x30a2,
} cmd_id_t;

typedef enum {
    REPEATABILITY_LOW = 0,
    REPEATABILITY_MEDIUM = 1,
    REPEATABILITY_HIGH = 2,
} repeatability;

typedef enum {
    MPS_EVERY_TWO_SECONDS = 0,
    MPS_ONE_PER_SECOND = 1,
    MPS_TWO_PER_SECOND = 2,
    MPS_FOUR_PER_SECOND = 4,
    MPS_TEN_PER_SECOND = 10,
} mps;

/**
 * @brief Initialize i2c address of driver
 *
 * @param[in] i2c_address Used i2c address
 *
 */
void sht3x_init(uint8_t i2c_address);

/**
 * @brief signal_temperature
 *
 * @param[in] temperature_ticks
 *
 * @return Converted from ticks to degrees celsius by -45 + (175 * value /
 * 65535)
 */
float signal_temperature(uint16_t temperature_ticks);

/**
 * @brief signal_humidity
 *
 * @param[in] humidity_ticks
 *
 * @return Converted from ticks to relative humidity by 100 * value / 65535
 */
float signal_humidity(uint16_t humidity_ticks);

/**
 * @brief Single shot measurement with the specified properties
 *
 * @param[in] measurement_repeatability The repeatability of the periodic
 * measurement
 * @param[in] is_clock_stretching Toggle clock stretching
 * @param[out] a_temperature Converted from ticks to degrees celsius by -45 +
 * (175 * value / 65535)
 * @param[out] a_humidity Converted from ticks to relative humidity by 100 *
 * value / 65535
 *
 * @return error_code 0 on success, an error code otherwise.
 */
int16_t sht3x_measure_single_shot(repeatability measurement_repeatability,
                                  bool is_clock_stretching,
                                  float* a_temperature, float* a_humidity);

/**
 * @brief sht3x_start_periodic_measurement
 *
 * Start the periodic measurement measurement mode.
 *
 * This is a convenience method that selects the correct measurement command
 * based on the provided arguments.
 *
 * @param[in] measurement_repeatability The repeatability of the periodic
 * measurement
 * @param[in] messages_per_second The messages per second of the periodic
 * measurement
 *
 * @return error_code 0 on success, an error code otherwise.
 */
int16_t
sht3x_start_periodic_measurement(repeatability measurement_repeatability,
                                 mps messages_per_second);

/**
 * @brief sht3x_blocking_read_measurement
 *
 * This is a convenience method that combines polling the data ready flag and
 * reading out the data. As the minimal measurement interval is 2s and we sleep
 * for 100ms we iterate at most 200 times. Note that this is blocking the system
 * for a considerable amount of time!
 *
 * @param[out] a_temperature Converted from ticks to degrees celsius by -45 +
 * (175 * value / 65535)
 * @param[out] a_humidity Converted from ticks to relative humidity by 100 *
 * value / 65535
 *
 * @return error_code 0 on success, an error code otherwise.
 */
int16_t sht3x_blocking_read_measurement(float* a_temperature,
                                        float* a_humidity);

/**
 * @brief Read the contents of the status register
 *
 * @param[out] a_status_register
 *
 * @return error_code 0 on success, an error code otherwise.
 */
int16_t sht3x_read_status_register(uint16_t* a_status_register);

/**
 * @brief sht3x_measure_single_shot_high_repeatability
 *
 * Single shot measurement with high repeatability
 *
 * @param[out] temperature_ticks Temperature ticks. Convert to degrees celsius
 * by -45 + 175 * value / 65535
 * @param[out] humidity_ticks Humidity ticks. Convert to relative humidity by
 * 100 * value / 65535
 *
 * @return error_code 0 on success, an error code otherwise.
 */
int16_t
sht3x_measure_single_shot_high_repeatability(uint16_t* temperature_ticks,
                                             uint16_t* humidity_ticks);

/**
 * @brief sht3x_measure_single_shot_high_repeatability_clock_stretching
 *
 * Single shot measurement with high repeatability and clock stretching enabled
 *
 * @param[out] temperature_ticks Temperature ticks. Convert to degrees celsius
 * by -45 + 175 * value / 65535
 * @param[out] humidity_ticks Humidity ticks. Convert to relative humidity by
 * 100 * value / 65535
 *
 * @return error_code 0 on success, an error code otherwise.
 */
int16_t sht3x_measure_single_shot_high_repeatability_clock_stretching(
    uint16_t* temperature_ticks, uint16_t* humidity_ticks);

/**
 * @brief sht3x_measure_single_shot_medium_repeatability
 *
 * Single shot measurement with medium repeatability
 *
 * @param[out] temperature_ticks Temperature ticks. Convert to degrees celsius
 * by -45 + 175 * value / 65535
 * @param[out] humidity_ticks Humidity ticks. Convert to relative humidity by
 * 100 * value / 65535
 *
 * @return error_code 0 on success, an error code otherwise.
 */
int16_t
sht3x_measure_single_shot_medium_repeatability(uint16_t* temperature_ticks,
                                               uint16_t* humidity_ticks);

/**
 * @brief sht3x_measure_single_shot_medium_repeatability_clock_stretching
 *
 * Single shot measurement with medium repeatability and clock stretching
 * enabled
 *
 * @param[out] temperature_ticks Temperature ticks. Convert to degrees celsius
 * by -45 + 175 * value / 65535
 * @param[out] humidity_ticks Humidity ticks. Convert to relative humidity by
 * 100 * value / 65535
 *
 * @return error_code 0 on success, an error code otherwise.
 */
int16_t sht3x_measure_single_shot_medium_repeatability_clock_stretching(
    uint16_t* temperature_ticks, uint16_t* humidity_ticks);

/**
 * @brief sht3x_measure_single_shot_low_repeatability
 *
 * Single shot measurement with low repeatability
 *
 * @param[out] temperature_ticks Temperature ticks. Convert to degrees celsius
 * by -45 + 175 * value / 65535
 * @param[out] humidity_ticks Humidity ticks. Convert to relative humidity by
 * 100 * value / 65535
 *
 * @return error_code 0 on success, an error code otherwise.
 */
int16_t sht3x_measure_single_shot_low_repeatability(uint16_t* temperature_ticks,
                                                    uint16_t* humidity_ticks);

/**
 * @brief sht3x_measure_single_shot_low_repeatability_clock_stretching
 *
 * Single shot measurement with low repeatability and clock stretching enabled
 *
 * @param[out] temperature_ticks Temperature ticks. Convert to degrees celsius
 * by -45 + 175 * value / 65535
 * @param[out] humidity_ticks Humidity ticks. Convert to relative humidity by
 * 100 * value / 65535
 *
 * @return error_code 0 on success, an error code otherwise.
 */
int16_t sht3x_measure_single_shot_low_repeatability_clock_stretching(
    uint16_t* temperature_ticks, uint16_t* humidity_ticks);

/**
 * @brief sht3x_start_measurement_0_5_mps_high_repeatability
 *
 * Start periodic measurement mode with 0.5 mps and high repeatability.
 *
 * @return error_code 0 on success, an error code otherwise.
 */
int16_t sht3x_start_measurement_0_5_mps_high_repeatability();

/**
 * @brief sht3x_start_measurement_0_5_mps_medium_repeatability
 *
 * Start periodic measurement mode with 0.5 mps and medium repeatability.
 *
 * @return error_code 0 on success, an error code otherwise.
 */
int16_t sht3x_start_measurement_0_5_mps_medium_repeatability();

/**
 * @brief sht3x_start_measurement_0_5_mps_low_repeatability
 *
 * Start periodic measurement mode with 0.5 mps and low repeatability.
 *
 * @return error_code 0 on success, an error code otherwise.
 */
int16_t sht3x_start_measurement_0_5_mps_low_repeatability();

/**
 * @brief sht3x_start_measurement_1_mps_high_repeatability
 *
 * Start periodic measurement mode with 1 mps and high repeatability.
 *
 * @return error_code 0 on success, an error code otherwise.
 */
int16_t sht3x_start_measurement_1_mps_high_repeatability();

/**
 * @brief sht3x_start_measurement_1_mps_medium_repeatability
 *
 * Start periodic measurement mode with 1 mps and medium repeatability.
 *
 * @return error_code 0 on success, an error code otherwise.
 */
int16_t sht3x_start_measurement_1_mps_medium_repeatability();

/**
 * @brief sht3x_start_measurement_1_mps_low_repeatability
 *
 * Start periodic measurement mode with 1 mps and low repeatability.
 *
 * @return error_code 0 on success, an error code otherwise.
 */
int16_t sht3x_start_measurement_1_mps_low_repeatability();

/**
 * @brief sht3x_start_measurement_2_mps_high_repeatability
 *
 * Start periodic measurement mode with 2 mps and high repeatability.
 *
 * @return error_code 0 on success, an error code otherwise.
 */
int16_t sht3x_start_measurement_2_mps_high_repeatability();

/**
 * @brief sht3x_start_measurement_2_mps_medium_repeatability
 *
 * Start periodic measurement mode with 2 mps and medium repeatability.
 *
 * @return error_code 0 on success, an error code otherwise.
 */
int16_t sht3x_start_measurement_2_mps_medium_repeatability();

/**
 * @brief sht3x_start_measurement_2_mps_low_repeatability
 *
 * Start periodic measurement mode with 2 mps and low repeatability.
 *
 * @return error_code 0 on success, an error code otherwise.
 */
int16_t sht3x_start_measurement_2_mps_low_repeatability();

/**
 * @brief sht3x_start_measurement_4_mps_high_repeatability
 *
 * Start periodic measurement mode with 4 mps and high repeatability.
 *
 * @return error_code 0 on success, an error code otherwise.
 */
int16_t sht3x_start_measurement_4_mps_high_repeatability();

/**
 * @brief sht3x_start_measurement_4_mps_medium_repeatability
 *
 * Start periodic measurement mode with 4 mps and medium repeatability.
 *
 * @return error_code 0 on success, an error code otherwise.
 */
int16_t sht3x_start_measurement_4_mps_medium_repeatability();

/**
 * @brief sht3x_start_measurement_4_mps_low_repeatability
 *
 * Start periodic measurement mode with 4 mps and low repeatability.
 *
 * @return error_code 0 on success, an error code otherwise.
 */
int16_t sht3x_start_measurement_4_mps_low_repeatability();

/**
 * @brief sht3x_start_measurement_10_mps_high_repeatability
 *
 * Start periodic measurement mode with 10 mps and high repeatability.
 *
 * @return error_code 0 on success, an error code otherwise.
 */
int16_t sht3x_start_measurement_10_mps_high_repeatability();

/**
 * @brief sht3x_start_measurement_10_mps_medium_repeatability
 *
 * Start periodic measurement mode with 10 mps and medium repeatability.
 *
 * @return error_code 0 on success, an error code otherwise.
 */
int16_t sht3x_start_measurement_10_mps_medium_repeatability();

/**
 * @brief sht3x_start_measurement_10_mps_low_repeatability
 *
 * Start periodic measurement mode with 10 mps and low repeatability.
 *
 * @return error_code 0 on success, an error code otherwise.
 */
int16_t sht3x_start_measurement_10_mps_low_repeatability();

/**
 * @brief sht3x_start_art_measurement
 *
 * Start ART (accelerated response time) measurement
 *
 * @note After issuing the ART command the sensor will start acquiring data with
 * a frequency of 4Hz.
 *
 * @return error_code 0 on success, an error code otherwise.
 */
int16_t sht3x_start_art_measurement();

/**
 * @brief sht3x_read_measurement
 *
 * Read out data after a "start measurement" or "start art measurement" command
 * has been issued.
 *
 * @param[out] temperature_ticks Temperature ticks. Convert to degrees celsius
 * by -45 + 175 * value / 65535
 * @param[out] humidity_ticks Humidity ticks. Convert to relative humidity by
 * 100 * value / 65535
 *
 * @note After the read out command fetch data has been issued, the data memory
 * is cleared, i.e. no measurement data is present.
 *
 * @return error_code 0 on success, an error code otherwise.
 */
int16_t sht3x_read_measurement(uint16_t* temperature_ticks,
                               uint16_t* humidity_ticks);

/**
 * @brief sht3x_stop_measurement
 *
 * Stop the periodic measurement mode.
 *
 * @note Upon reception of this command the sensor will abort the ongoing
 * measurement and enter the single shot mode.
 *
 * @return error_code 0 on success, an error code otherwise.
 */
int16_t sht3x_stop_measurement();

/**
 * @brief sht3x_enable_heater
 *
 * Enable the heater
 *
 * @note The SHT3x is equipped with an internal heater, which is meant for
 * plausibility checking only. The temperature increase achieved by the heater
 * depends on various parameters and lies in the range of a few degrees
 * centigrade.
 *
 * After a reset the heater is disabled (default condition).
 *
 * @return error_code 0 on success, an error code otherwise.
 */
int16_t sht3x_enable_heater();

/**
 * @brief sht3x_disable_heater
 *
 * Disable the heater
 *
 * @return error_code 0 on success, an error code otherwise.
 */
int16_t sht3x_disable_heater();

/**
 * @brief ll_sht3x_read_status_register
 *
 * Read out the status register
 *
 * @param[out] status_register The contents of the status register
 *
 * @note The status register contains information on the operational status of
 * the heater, the alert mode and on the execution status of the last command
 * and the last write sequence.
 *
 * @return error_code 0 on success, an error code otherwise.
 */
int16_t ll_sht3x_read_status_register(uint16_t* status_register);

/**
 * @brief sht3x_clear_status_register
 *
 * Clear (set to zero) all flags (Bit 4) in the status register.
 *
 * @return error_code 0 on success, an error code otherwise.
 */
int16_t sht3x_clear_status_register();

/**
 * @brief sht3x_soft_reset
 *
 * Perform a soft reset.
 *
 * @note A system reset of the SHT3x can be achieved in multiple ways: - Soft
 * reset: use this command - I2C general call: all devices on the I2C bus are
 * reset by sending the command 0x06 to the I2C address 0x00 - Reset pin: send a
 * pulse to the dedicated nReset pin. The nReset pin has to be pulled low for a
 * minimum of 1 µs to generate a reset of the sensor. - Hard reset: Power down
 * (incl. pulling SDA, SCL and ADDR low)
 *
 * During the reset procedure the sensor will not process commands.
 *
 * @return error_code 0 on success, an error code otherwise.
 */
int16_t sht3x_soft_reset();

#ifdef __cplusplus
}
#endif
#endif  // SHT3X_I2C_H