Nothing is happening when I hit generate

[wayneout]

I have the latest release. I am using A1111. When I hit generate, nothing happens.
It was working two days ago. No error messages or anything. I have waited over ten
minutes and the command prompt just sits there. Anyone else have this problem?

[Rolliboy]

I have the same problem after new update to Stable Diffusion 1.8.0

[babishutdown]

me too, waiting for new update for 1111 1.8.0

[daffatahtaa]

same here

[KoSv]

same

[Kokoroshinobi75]

Same for me. It working last 2 days ago.

[CCPRAICES]

same problem with automatic1111 and forge

[Kokoroshinobi75]

Downgrade version to 1.7 with add Line in webuser.bat:
Git reset --hard cf2772f
Working for me.
While waiting for fix or a New version

[dron28]

[SuouK]

After the update, I was the same. MOV2MOV it does not work, the CMD table does not work on MOV2MOV. Hope someone can read and help.

[Kokoroshinobi75]

Downgrade version to 1.7 with add Line in webuser.bat:
Git reset --hard cf2772f
Working for me.
While waiting for fix or a New version

[SuouK]

Downgrade version to 1.7 with add Line in webuser.bat: Git reset --hard cf2772f Working for me. While waiting for fix or a New version

I tried to do your way but this error: Notimplificationerror: no operator found for Memory_efficient_attention_Forward with inputs

[Kokoroshinobi75]

Downgrade version to 1.7 with add Line in webuser.bat: Git reset --hard cf2772f Working for me. While waiting for fix or a New version

I tried to do your way but this error: Notimplificationerror: no operator found for Memory_efficient_attention_Forward with inputs

Problem appears to have been resolved by following the steps in #6871 (comment). Just delete venv folder and run webui with --xformers

[Kokoroshinobi75]

AUTOMATIC1111/stable-diffusion-webui#6871 (comment)

[SuouK]

AUTOMATIC1111/ổn định-khuếch tán-webui#6871 (bình luận)

Thank you so much. I have fixed it.

[wayneout]

works for me now. Thnks

[mark20044]

Downgrade version to 1.7 with add Line in webuser.bat: Git reset --hard cf2772f Working for me. While waiting for fix or a New version

The launch scripts (windows and linux) don't automatically update the repo so you really only need to run the command git reset --hard cf2772f once from the command line, no need to update your .bat or .sh files.

[Takezo1000]

Downgrade version to 1.7 with add Line in webuser.bat: Git reset --hard cf2772f Working for me. While waiting for fix or a New version

The launch scripts (windows and linux) don't automatically update the repo so you really only need to run the command git reset --hard cf2772f once from the command line, no need to update your .bat or .sh files.

Where do I put the command in the Webui-user.bat? At the start (line 1) before "@echo off" or inside the "set COMMANDLINE_ARGS" ?

[viking1304]

Someone complained on SD Discord that this extension does not work on 1.8.0 and has no errors. So I tried the same thing we did deforum-art/sd-webui-deforum#950, and mov2mov worked on both 1.8.0 and 1.7.0 on my computer.

Are there any volunteers to test the fix for 1.8.0? Please test on both versions if you can.

Download m2m_ui.py.zip and replace the m2m_ui.py in the scripts folder of mov2mov, or check the differences and apply the fix yourself.

[Rolliboy]

Someone complained on SD Discord that this extension does not work on 1.8.0 and has no errors. So I tried the same thing we did deforum-art/sd-webui-deforum#950, and mov2mov worked on both 1.8.0 and 1.7.0 on my computer.

Are there any volunteers to test the fix for 1.8.0? Please test on both versions if you can.

Download m2m_ui.py.zip and replace the m2m_ui.py in the scripts folder of mov2mov, or check the differences and apply the fix yourself.

I can confirm this fix works on 1.8.0. Thanks!

[L4R0SE]

Someone complained on SD Discord that this extension does not work on 1.8.0 and has no errors. So I tried the same thing we did deforum-art/sd-webui-deforum#950, and mov2mov worked on both 1.8.0 and 1.7.0 on my computer.

Are there any volunteers to test the fix for 1.8.0? Please test on both versions if you can.

Download m2m_ui.py.zip and replace the m2m_ui.py in the scripts folder of mov2mov, or check the differences and apply the fix yourself.

Works perfectly on 1.8.0 - thanks for the effort.

[Esimacio]

Someone complained on SD Discord that this extension does not work on 1.8.0 and has no errors. So I tried the same thing we did deforum-art/sd-webui-deforum#950, and mov2mov worked on both 1.8.0 and 1.7.0 on my computer.

Are there any volunteers to test the fix for 1.8.0? Please test on both versions if you can.

Download m2m_ui.py.zip and replace the m2m_ui.py in the scripts folder of mov2mov, or check the differences and apply the fix yourself.

This superb solution works on 1.8.0

[nothingness6]

Someone complained on SD Discord that this extension does not work on 1.8.0 and has no errors. So I tried the same thing we did deforum-art/sd-webui-deforum#950, and mov2mov worked on both 1.8.0 and 1.7.0 on my computer.

Are there any volunteers to test the fix for 1.8.0? Please test on both versions if you can.

Download m2m_ui.py.zip and replace the m2m_ui.py in the scripts folder of mov2mov, or check the differences and apply the fix yourself.

I also faced the same issue, but have no idea what's going on as I'm a beginner. Could you explain the details, please?

[viking1304]

i'm unable to download the file you shared.. can you reupload it

The file was uploaded with the message. Try the full link https://github.com/Scholar01/sd-webui-mov2mov/files/14539759/m2m_ui.py.zip If that still doesn't work, check differences and apply the fix yourself.

Or download my fork https://github.com/viking1304/sd-webui-mov2mov, find a file in zip and replace the original file.

[nothingness6]

i'm unable to download the file you shared.. can you reupload it

The file was uploaded with the message. Try the full link https://github.com/Scholar01/sd-webui-mov2mov/files/14539759/m2m_ui.py.zip If that still doesn't work, check differences and apply the fix yourself.

Or download my fork https://github.com/viking1304/sd-webui-mov2mov, find a file in zip and replace the original file.

Finally, it works! Thanks!!

[Dowgen]

Someone complained on SD Discord that this extension does not work on 1.8.0 and has no errors. So I tried the same thing we did deforum-art/sd-webui-deforum#950, and mov2mov worked on both 1.8.0 and 1.7.0 on my computer.

Are there any volunteers to test the fix for 1.8.0? Please test on both versions if you can.

Download m2m_ui.py.zip and replace the m2m_ui.py in the scripts folder of mov2mov, or check the differences and apply the fix yourself.

Works on 1.8.0. Thanks!

[hxb276]

Someone complained on SD Discord that this extension does not work on 1.8.0 and has no errors. So I tried the same thing we did deforum-art/sd-webui-deforum#950, and mov2mov worked on both 1.8.0 and 1.7.0 on my computer.

Are there any volunteers to test the fix for 1.8.0? Please test on both versions if you can.

Download m2m_ui.py.zip and replace the m2m_ui.py in the scripts folder of mov2mov, or check the differences and apply the fix yourself.

it works for me,thanks!!! version 1.8.0

[mdhuang555]

Someone complained on SD Discord that this extension does not work on 1.8.0 and has no errors. So I tried the same thing we did deforum-art/sd-webui-deforum#950, and mov2mov worked on both 1.8.0 and 1.7.0 on my computer.

Are there any volunteers to test the fix for 1.8.0? Please test on both versions if you can.

Download m2m_ui.py.zip and replace the m2m_ui.py in the scripts folder of mov2mov, or check the differences and apply the fix yourself.

thanks! It works for me!! 1.8.0

[Hansee62]

Thanks worked for me :-)

[A3734]

誰かが SD Discord で、この拡張機能は 1.8.0 では動作せず、エラーも発生しないと苦情を言いました。、私のコンピュータではmov2movが1.8.0と1.7.0の両方で動作しました。

1.8.0 の修正をテストしてくれるボランティアはいますか? 可能であれば、両方のバージョンでテストしてください。

m2m_ui.py.zipをダウンロードして、m2m_ui.pymov2mov のスクリプトを修正するか、違いを確認して自分で修正を適用します。

有難うございました！解決しました。

Someone complained on SD Discord that this extension does not work on 1.8.0 and has no errors. So I tried the same thing we did deforum-art/sd-webui-deforum#950, and mov2mov worked on both 1.8.0 and 1.7.0 on my computer.

Are there any volunteers to test the fix for 1.8.0? Please test on both versions if you can.

Download m2m_ui.py.zip and replace the m2m_ui.py in the scripts folder of mov2mov, or check the differences and apply the fix yourself.

I appreciate your help. The problem has been solved.

[ysysycyc]

Someone complained on SD Discord that this extension does not work on 1.8.0 and has no errors. So I tried the same thing we did deforum-art/sd-webui-deforum#950, and mov2mov worked on both 1.8.0 and 1.7.0 on my computer.

Are there any volunteers to test the fix for 1.8.0? Please test on both versions if you can.

Download m2m_ui.py.zip and replace the m2m_ui.py in the scripts folder of mov2mov, or check the differences and apply the fix yourself.

it works.but i can't understand why,just two function new

[beausoft]

Someone complained on SD Discord that this extension does not work on 1.8.0 and has no errors. So I tried the same thing we did deforum-art/sd-webui-deforum#950, and mov2mov worked on both 1.8.0 and 1.7.0 on my computer.

Are there any volunteers to test the fix for 1.8.0? Please test on both versions if you can.

Download m2m_ui.py.zip and replace the m2m_ui.py in the scripts folder of mov2mov, or check the differences and apply the fix yourself.

thanks,it works.

[1manfactory]

Fix works.
Thanks for your efforts in programming this tool.

[nerzak-dominion]

Download m2m_ui.py.zip and replace the m2m_ui.py in the scripts folder of mov2mov, or check the differences and apply the fix yourself.

Works on 1.9
Thanks!

[BlankThrow]

i'm unable to download the file you shared.. can you reupload it

The file was uploaded with the message. Try the full link https://github.com/Scholar01/sd-webui-mov2mov/files/14539759/m2m_ui.py.zip If that still doesn't work, check differences and apply the fix yourself.

Or download my fork https://github.com/viking1304/sd-webui-mov2mov, find a file in zip and replace the original file.

just wanted to say, your fork was the only reason why i was able ot get it to work. I was to new at the time to understand what was going on , but getting that url and putting it in my extensions tab saved my life. thanks.

[viking1304]

just wanted to say, your fork was the only reason why i was able ot get it to work. I was to new at the time to understand what was going on , but getting that url and putting it in my extensions tab saved my life. thanks.

I just hope that the guy who made this extension is well, since I see that he didn't had any code commit in the last 6 months.

[janziig]

i'm unable to download the file you shared.. can you reupload it

The file was uploaded with the message. Try the full link https://github.com/Scholar01/sd-webui-mov2mov/files/14539759/m2m_ui.py.zip If that still doesn't work, check differences and apply the fix yourself.
Or download my fork https://github.com/viking1304/sd-webui-mov2mov, find a file in zip and replace the original file.

Nope. Still doesn't work for me on 1.9.4. Generate does nothing. I downloaded and installed this fork. Replaced m2m_ui.py with zipped file. Did not help. Deleted and rebuilt venv folder just in case. Still broken.

Is this fix incompatible with 1.9.4? Do I need to downgrade to 1.80? Is there as alternative to this extension that does work?

It's a shame that extensions start to fail once the original author stops working on it.

[Scholar01]

I'm so sorry everyone, my daughter was born last year and I needed to spend a lot of time on work/family balance, so this project has been on hold for nearly a year. I'll try to fix it in the near future