Merge pull request #34 from Rust-for-Linux/sync-5.9

Sync with v5.9

Author: ojeda

.clang-format

@@ -111,6 +111,7 @@ ForEachMacros:
   - 'css_for_each_descendant_pre'
   - 'device_for_each_child_node'
   - 'dma_fence_chain_for_each'
+  - 'do_for_each_ftrace_op'
   - 'drm_atomic_crtc_for_each_plane'
   - 'drm_atomic_crtc_state_for_each_plane'
   - 'drm_atomic_crtc_state_for_each_plane_state'
@@ -136,6 +137,7 @@ ForEachMacros:
   - 'for_each_active_dev_scope'
   - 'for_each_active_drhd_unit'
   - 'for_each_active_iommu'
+  - 'for_each_aggr_pgid'
   - 'for_each_available_child_of_node'
   - 'for_each_bio'
   - 'for_each_board_func_rsrc'
@@ -234,6 +236,7 @@ ForEachMacros:
   - 'for_each_node_state'
   - 'for_each_node_with_cpus'
   - 'for_each_node_with_property'
+  - 'for_each_nonreserved_multicast_dest_pgid'
   - 'for_each_of_allnodes'
   - 'for_each_of_allnodes_from'
   - 'for_each_of_cpu_node'
@@ -256,6 +259,7 @@ ForEachMacros:
   - 'for_each_pci_dev'
   - 'for_each_pci_msi_entry'
   - 'for_each_pcm_streams'
+  - 'for_each_physmem_range'
   - 'for_each_populated_zone'
   - 'for_each_possible_cpu'
   - 'for_each_present_cpu'
@@ -265,6 +269,8 @@ ForEachMacros:
   - 'for_each_process_thread'
   - 'for_each_property_of_node'
   - 'for_each_registered_fb'
+  - 'for_each_requested_gpio'
+  - 'for_each_requested_gpio_in_range'
   - 'for_each_reserved_mem_region'
   - 'for_each_rtd_codec_dais'
   - 'for_each_rtd_codec_dais_rollback'
@@ -278,12 +284,17 @@ ForEachMacros:
   - 'for_each_sg'
   - 'for_each_sg_dma_page'
   - 'for_each_sg_page'
+  - 'for_each_sgtable_dma_page'
+  - 'for_each_sgtable_dma_sg'
+  - 'for_each_sgtable_page'
+  - 'for_each_sgtable_sg'
   - 'for_each_sibling_event'
   - 'for_each_subelement'
   - 'for_each_subelement_extid'
   - 'for_each_subelement_id'
   - '__for_each_thread'
   - 'for_each_thread'
+  - 'for_each_unicast_dest_pgid'
   - 'for_each_wakeup_source'
   - 'for_each_zone'
   - 'for_each_zone_zonelist'
@@ -464,6 +475,7 @@ ForEachMacros:
   - 'v4l2_m2m_for_each_src_buf'
   - 'v4l2_m2m_for_each_src_buf_safe'
   - 'virtio_device_for_each_vq'
+  - 'while_for_each_ftrace_op'
   - 'xa_for_each'
   - 'xa_for_each_marked'
   - 'xa_for_each_range'

.mailmap

@@ -41,7 +41,8 @@ Andrew Murray <amurray@thegoodpenguin.co.uk> <andrew.murray@arm.com>
 Andrew Vasquez <andrew.vasquez@qlogic.com>
 Andrey Ryabinin <ryabinin.a.a@gmail.com> <a.ryabinin@samsung.com>
 Andy Adamson <andros@citi.umich.edu>
-Antoine Tenart <antoine.tenart@free-electrons.com>
+Antoine Tenart <atenart@kernel.org> <antoine.tenart@bootlin.com>
+Antoine Tenart <atenart@kernel.org> <antoine.tenart@free-electrons.com>
 Antonio Ospite <ao2@ao2.it> <ao2@amarulasolutions.com>
 Archit Taneja <archit@ti.com>
 Ard Biesheuvel <ardb@kernel.org> <ard.biesheuvel@linaro.org>
@@ -169,6 +170,10 @@ Juha Yrjola <juha.yrjola@solidboot.com>
 Julien Thierry <julien.thierry.kdev@gmail.com> <julien.thierry@arm.com>
 Kamil Konieczny <k.konieczny@samsung.com> <k.konieczny@partner.samsung.com>
 Kay Sievers <kay.sievers@vrfy.org>
+Kees Cook <keescook@chromium.org> <kees.cook@canonical.com>
+Kees Cook <keescook@chromium.org> <keescook@google.com>
+Kees Cook <keescook@chromium.org> <kees@outflux.net>
+Kees Cook <keescook@chromium.org> <kees@ubuntu.com>
 Kenneth W Chen <kenneth.w.chen@intel.com>
 Konstantin Khlebnikov <koct9i@gmail.com> <khlebnikov@yandex-team.ru>
 Konstantin Khlebnikov <koct9i@gmail.com> <k.khlebnikov@samsung.com>
@@ -184,6 +189,7 @@ Leon Romanovsky <leon@kernel.org> <leonro@nvidia.com>
 Linas Vepstas <linas@austin.ibm.com>
 Linus Lüssing <linus.luessing@c0d3.blue> <linus.luessing@ascom.ch>
 Linus Lüssing <linus.luessing@c0d3.blue> <linus.luessing@web.de>
+<linux-hardening@vger.kernel.org> <kernel-hardening@lists.openwall.com>
 Li Yang <leoyang.li@nxp.com> <leoli@freescale.com>
 Li Yang <leoyang.li@nxp.com> <leo@zh-kernel.org>
 Lukasz Luba <lukasz.luba@arm.com> <l.luba@partner.samsung.com>
@@ -308,6 +314,7 @@ Tony Luck <tony.luck@intel.com>
 TripleX Chung <xxx.phy@gmail.com> <triplex@zh-kernel.org>
 TripleX Chung <xxx.phy@gmail.com> <zhongyu@18mail.cn>
 Tsuneo Yoshioka <Tsuneo.Yoshioka@f-secure.com>
+Tycho Andersen <tycho@tycho.pizza> <tycho@tycho.ws>
 Uwe Kleine-König <ukleinek@informatik.uni-freiburg.de>
 Uwe Kleine-König <ukl@pengutronix.de>
 Uwe Kleine-König <Uwe.Kleine-Koenig@digi.com>

Documentation/RCU/lockdep.rst

@@ -49,7 +49,7 @@ checking of rcu_dereference() primitives:
 		is invoked by both RCU-sched readers and updaters.
 	srcu_dereference_check(p, c):
 		Use explicit check expression "c" along with
-		srcu_read_lock_held()().  This is useful in code that
+		srcu_read_lock_held().  This is useful in code that
 		is invoked by both SRCU readers and updaters.
 	rcu_dereference_raw(p):
 		Don't check.  (Use sparingly, if at all.)

Documentation/admin-guide/cgroup-v2.rst

@@ -1324,15 +1324,26 @@ PAGE_SIZE multiple when read back.
 	  pgmajfault
 		Number of major page faults incurred
 
-	  workingset_refault
-		Number of refaults of previously evicted pages
+	  workingset_refault_anon
+		Number of refaults of previously evicted anonymous pages.
 
-	  workingset_activate
-		Number of refaulted pages that were immediately activated
+	  workingset_refault_file
+		Number of refaults of previously evicted file pages.
 
-	  workingset_restore
-		Number of restored pages which have been detected as an active
-		workingset before they got reclaimed.
+	  workingset_activate_anon
+		Number of refaulted anonymous pages that were immediately
+		activated.
+
+	  workingset_activate_file
+		Number of refaulted file pages that were immediately activated.
+
+	  workingset_restore_anon
+		Number of restored anonymous pages which have been detected as
+		an active workingset before they got reclaimed.
+
+	  workingset_restore_file
+		Number of restored file pages which have been detected as an
+		active workingset before they got reclaimed.
 
 	  workingset_nodereclaim
 		Number of times a shadow node has been reclaimed

Documentation/admin-guide/device-mapper/dm-crypt.rst

@@ -67,7 +67,7 @@ Parameters::
     the value passed in <key_size>.
 
 <key_type>
-    Either 'logon' or 'user' kernel key type.
+    Either 'logon', 'user' or 'encrypted' kernel key type.
 
 <key_description>
     The kernel keyring key description crypt target should look for
@@ -121,6 +121,14 @@ submit_from_crypt_cpus
     thread because it benefits CFQ to have writes submitted using the
     same context.
 
+no_read_workqueue
+    Bypass dm-crypt internal workqueue and process read requests synchronously.
+
+no_write_workqueue
+    Bypass dm-crypt internal workqueue and process write requests synchronously.
+    This option is automatically enabled for host-managed zoned block devices
+    (e.g. host-managed SMR hard-disks).
+
 integrity:<bytes>:<type>
     The device requires additional <bytes> metadata per-sector stored
     in per-bio integrity structure. This metadata must by provided

Documentation/admin-guide/devices.txt

@@ -1662,7 +1662,7 @@
 
   98 block	User-mode virtual block device
 		  0 = /dev/ubda		First user-mode block device
-		 16 = /dev/udbb		Second user-mode block device
+		 16 = /dev/ubdb		Second user-mode block device
 		    ...
 
 		Partitions are handled in the same way as for IDE

Documentation/admin-guide/dynamic-debug-howto.rst

@@ -156,7 +156,6 @@ against.  Possible keywords are:::
   ``line-range`` cannot contain space, e.g.
   "1-30" is valid range but "1 - 30" is not.
 
-  ``module=foo`` combined keyword=value form is interchangably accepted
 
 The meanings of each keyword are:
 

Documentation/admin-guide/laptops/thinkpad-acpi.rst

@@ -1434,7 +1434,7 @@ on the feature, restricting the viewing angles.
 
 
 DYTC Lapmode sensor
-------------------
+-------------------
 
 sysfs: dytc_lapmode
 

Documentation/admin-guide/pm/cpuidle.rst

@@ -690,7 +690,7 @@ which of the two parameters is added to the kernel command line.  In the
 instruction of the CPUs (which, as a rule, suspends the execution of the program
 and causes the hardware to attempt to enter the shallowest available idle state)
 for this purpose, and if ``idle=poll`` is used, idle CPUs will execute a
-more or less ``lightweight'' sequence of instructions in a tight loop.  [Note
+more or less "lightweight" sequence of instructions in a tight loop.  [Note
 that using ``idle=poll`` is somewhat drastic in many cases, as preventing idle
 CPUs from saving almost any energy at all may not be the only effect of it.
 For example, on Intel hardware it effectively prevents CPUs from using

Documentation/admin-guide/pm/intel_pstate.rst

@@ -123,7 +123,9 @@ Energy-Performance Bias (EPB) knob (otherwise), which means that the processor's
 internal P-state selection logic is expected to focus entirely on performance.
 
 This will override the EPP/EPB setting coming from the ``sysfs`` interface
-(see `Energy vs Performance Hints`_ below).
+(see `Energy vs Performance Hints`_ below).  Moreover, any attempts to change
+the EPP/EPB to a value different from 0 ("performance") via ``sysfs`` in this
+configuration will be rejected.
 
 Also, in this configuration the range of P-states available to the processor's
 internal P-state selection logic is always restricted to the upper boundary
@@ -564,8 +566,8 @@ Energy-Performance Preference (EPP) knob (if supported) or its
 Energy-Performance Bias (EPB) knob. It is also possible to write a positive
 integer value between 0 to 255, if the EPP feature is present. If the EPP
 feature is not present, writing integer value to this attribute is not
-supported. In this case, user can use
- "/sys/devices/system/cpu/cpu*/power/energy_perf_bias" interface.
+supported. In this case, user can use the
+"/sys/devices/system/cpu/cpu*/power/energy_perf_bias" interface.
 
 [Note that tasks may by migrated from one CPU to another by the scheduler's
 load-balancing algorithm and if different energy vs performance hints are