From 799dc07c2e647bbcd38885f0f300f1363cff5750 Mon Sep 17 00:00:00 2001
From: Lino Sanfilippo <l.sanfilippo@kunbus.com>
Date: Fri, 18 Sep 2020 16:47:10 +0200
Subject: [PATCH] overlays: set default trigger for leds

Make sure the leds use the led triggers which are provided by the
piControl module as default.

Signed-off-by: Lino Sanfilippo <l.sanfilippo@kunbus.com>
---
 .../boot/dts/overlays/revpi-flat-overlay.dts  | 22 +++++++++----------
 1 file changed, 11 insertions(+), 11 deletions(-)

diff --git a/arch/arm/boot/dts/overlays/revpi-flat-overlay.dts b/arch/arm/boot/dts/overlays/revpi-flat-overlay.dts
index 9fee3d7d83e1de..c5d6f8c927a43e 100644
--- a/arch/arm/boot/dts/overlays/revpi-flat-overlay.dts
+++ b/arch/arm/boot/dts/overlays/revpi-flat-overlay.dts
@@ -49,47 +49,47 @@
 				compatible = "gpio-leds";
 				power_red {
 					gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
-					linux,default-trigger = "none";
+					linux,default-trigger = "power_red";
 				};
 				a1_green {
 					gpios = <&expander 0 GPIO_ACTIVE_LOW>;
-					linux,default-trigger = "none";
+					linux,default-trigger = "a1_green";
 				};
 				a1_red {
 					gpios = <&expander 1 GPIO_ACTIVE_LOW>;
-					linux,default-trigger = "none";
+					linux,default-trigger = "a1_red";
 				};
 				a2_green {
 					gpios = <&expander 2 GPIO_ACTIVE_LOW>;
-					linux,default-trigger = "none";
+					linux,default-trigger = "a2_green";
 				};
 				a2_red {
 					gpios = <&expander 3 GPIO_ACTIVE_LOW>;
-					linux,default-trigger = "none";
+					linux,default-trigger = "a2_red";
 				};
 				a3_green {
 					gpios = <&expander 4 GPIO_ACTIVE_LOW>;
-					linux,default-trigger = "none";
+					linux,default-trigger = "a3_green";
 				};
 				a3_red {
 					gpios = <&expander 5 GPIO_ACTIVE_LOW>;
-					linux,default-trigger = "none";
+					linux,default-trigger = "a3_red";
 				};
 				a4_green {
 					gpios = <&expander 6 GPIO_ACTIVE_LOW>;
-					linux,default-trigger = "none";
+					linux,default-trigger = "a4_green";
 				};
 				a4_red {
 					gpios = <&expander 7 GPIO_ACTIVE_LOW>;
-					linux,default-trigger = "none";
+					linux,default-trigger = "a4_red";
 				};
 				a5_green {
 					gpios = <&expander 8 GPIO_ACTIVE_LOW>;
-					linux,default-trigger = "none";
+					linux,default-trigger = "a5_green";
 				};
 				a5_red {
 					gpios = <&expander 9 GPIO_ACTIVE_LOW>;
-					linux,default-trigger = "none";
+					linux,default-trigger = "a5_red";
 				};
 				act {
 					status = "disabled";