SiGN WiFi Smart Outdoor Plug (similar to Hama Outdoor Plug)

[emilof]

Device Name: SiGN WiFi Smart Outdoor Plug (Almost identical with Hama 2300W/10A Outdoor Plug)
URL to Device: https://www.spares.se/product/sign-smart-wifi-plug-outdoor-ip44-16a
(Hama: https://templates.blakadder.com/hama_00176570.html
Used HAA version: 12.9.0
Summary of functions: On/off button, status LED, and active (on/off) LED
MEPLHAA script:

{
  "c": {
    "io": [
      [[4, 5, 12], 2],
      [[13], 6]
    ],
    "o": 0,
    "l": 5,
    "i": 1,
    "b": [[13, 5]]
  },
  "a": [
    {
      "t": 2,
      "0": {
        "r": [
          [
            12,
            0
          ],
          [
            4,
            1
          ]
        ]
      },
      "1": {
        "r": [
          [
            12,
            1
          ],
          [
            4,
            0
          ]
        ]
      },
      "b": [
        [
          13,
          1
        ]
      ]
    }
  ]
}

(Note: When using this config on a Hama Outdoor Plug, you might need to flip the status LED with the "active" LED to get the correct color = green when active and blinking red for status changes. Not 100% sure though since I haven't tested this on an actual Hama plug)

1. Followed this guide to open the plug and to find the correct solder points: https://templates.blakadder.com/hama_00176570.html
2. Flashed to Tasmota using a CH340G USB-Serial adapter
3. Configured WiFi on the device and then flashed it to tasmota-minimal.bin.gz (http://ota.tasmota.com/tasmota/release/) using Tasmota's UI. This was required due to the space limitation on the chip
4. Flashed HAA using the Tasmota UI