diff --git a/FHEM/00_SIGNALduino.pm b/FHEM/00_SIGNALduino.pm
index 0d0aec3eb..986d2b1f0 100644
--- a/FHEM/00_SIGNALduino.pm
+++ b/FHEM/00_SIGNALduino.pm
@@ -1,4 +1,4 @@
-# $Id: 00_SIGNALduino.pm 3.5.5 2023-01-07 16:05:33Z sidey79 $
+# $Id: 00_SIGNALduino.pm 3.5.5 2023-01-09 19:54:08Z sidey79 $
 # v3.5.5 - https://github.com/RFD-FHEM/RFFHEM/tree/master
 # The module is inspired by the FHEMduino project and modified in serval ways for processing the incoming messages
 # see http://www.fhemwiki.de/wiki/SIGNALDuino
@@ -41,7 +41,7 @@ use List::Util qw(first);
 
 
 use constant {
-  SDUINO_VERSION                  => '3.5.5+20230107',  # Datum wird automatisch bei jedem pull request aktualisiert
+  SDUINO_VERSION                  => '3.5.5+20230109',  # Datum wird automatisch bei jedem pull request aktualisiert
   SDUINO_INIT_WAIT_XQ             => 1.5,     # wait disable device
   SDUINO_INIT_WAIT                => 2,
   SDUINO_INIT_MAXRETRY            => 3,
@@ -644,7 +644,7 @@ sub SIGNALduino_RemoveLaCrossePair {
 }
 
 ############################# package main, test exists
-sub SIGNALduino_Set($$@) {
+sub SIGNALduino_Set {
   my ($hash,$name, @a) = @_;
 
   return "\"set SIGNALduino\" needs at least one parameter" if(@a < 1);
@@ -1007,9 +1007,8 @@ sub SIGNALduino_Set_LaCrossePairForSec {
 }
 
 ############################# package main, test exists
-sub SIGNALduino_Get($@) {
+sub SIGNALduino_Get {
   my ($hash,$name, @a) = @_;
-  #my $type = $hash->{TYPE};
 
   return "\"get SIGNALduino\" needs at least one parameter" if(@a < 1);
 
@@ -2102,7 +2101,7 @@ sub SIGNALduino_PatternExists {
 
 ############################# package main
 #SIGNALduino_MatchSignalPattern{$hash,@array, %hash, @array, $scalar}; not used >v3.1.3
-sub SIGNALduino_MatchSignalPattern($\@\%\@$){
+sub SIGNALduino_MatchSignalPattern {
   my ( $hash, $signalpattern,  $patternList,  $data_array, $idx) = @_;
     my $name = $hash->{NAME};
   #print Dumper($patternList);
@@ -2527,7 +2526,7 @@ sub SIGNALduino_Parse_MS {
 ############################# package main
 ## //Todo: check list as reference
 # // Todo: Make this sub robust and use it
-sub SIGNALduino_padbits(\@$) {
+sub SIGNALduino_padbits {
   my $i=@{$_[0]} % $_[1];
   while (@{$_[0]} % $_[1] > 0)  ## will pad up full nibbles per default or full byte if specified in protocol
   {
@@ -2966,7 +2965,7 @@ sub SIGNALduino_Parse_MN {
 }
 
 ############################# package main
-sub SIGNALduino_Parse($$$$@) {
+sub SIGNALduino_Parse {
   my ($hash, $iohash, $name, $rmsg, $initstr) = @_;
 
   #print Dumper(\%ProtocolListSIGNALduino);
@@ -3069,7 +3068,7 @@ sub SIGNALduino_WriteInit {
 }
 
 ############################# package main
-sub SIGNALduino_SimpleWrite(@) {
+sub SIGNALduino_SimpleWrite {
   my ($hash, $msg, $nonl) = @_;
   return if(!$hash);
   if($hash->{TYPE} eq 'SIGNALduino_RFR') {
@@ -3091,7 +3090,7 @@ sub SIGNALduino_SimpleWrite(@) {
 }
 
 ############################# package main
-sub SIGNALduino_Attr(@) {
+sub SIGNALduino_Attr {
   my ($cmd,$name,$aName,$aVal) = @_;
   my $hash = $defs{$name};
   my $debug = AttrVal($name,'debug',0);
@@ -3229,7 +3228,7 @@ sub SIGNALduino_Attr(@) {
 }
 
 ############################# package main
-sub SIGNALduino_FW_Detail($@) {
+sub SIGNALduino_FW_Detail {
   my ($FW_wname, $name, $room, $pageHash) = @_;
 
   my $hash = $defs{$name};
@@ -3342,7 +3341,7 @@ sub SIGNALduino_FW_saveWhitelist {
 }
 
 ############################# package main      - test is missing
-sub SIGNALduino_IdList($@) {
+sub SIGNALduino_IdList {
   my ($param, $aVal, $blacklist, $develop0) = @_;
   my (undef,$name) = split(':', $param);
 
@@ -3545,7 +3544,7 @@ sub SIGNALduino_callsub {
 # Will return  $count of ???,  modified $rawData , modified %patternListRaw,
 # =cut
 ############################# package main
-sub SIGNALduino_filterMC($$$%) {
+sub SIGNALduino_filterMC {
   ## Warema Implementierung : Todo variabel gestalten
   my ($name,$id,$rawData,%patternListRaw) = @_;
   my $hash=$defs{$name};
@@ -3614,7 +3613,7 @@ sub SIGNALduino_filterMC($$$%) {
 # Will return  $count of combined values,  modified $rawData , modified %patternListRaw,
 # =cut
 ############################# package main
-sub SIGNALduino_filterSign($$$%) {
+sub SIGNALduino_filterSign {
   my ($name,$id,$rawData,%patternListRaw) = @_;
   my $debug = AttrVal($name,'debug',0);
 
@@ -3683,7 +3682,7 @@ sub SIGNALduino_filterSign($$$%) {
 # Will return  $count of combined values,  modified $rawData , modified %patternListRaw,
 # =cut
 ############################# package main
-sub SIGNALduino_compPattern($$$%) {
+sub SIGNALduino_compPattern {
   my ($name,$id,$rawData,%patternListRaw) = @_;
   my $debug = AttrVal($name,'debug',0);
 
diff --git a/FHEM/14_SD_AS.pm b/FHEM/14_SD_AS.pm
index 57f5262ad..61b449dfa 100644
--- a/FHEM/14_SD_AS.pm
+++ b/FHEM/14_SD_AS.pm
@@ -1,5 +1,5 @@
 ##############################################
-# $Id: 14_SD_AS.pm 350 2022-12-29 23:35:50Z sidey79 $
+# $Id: 14_SD_AS.pm 350 2023-01-09 19:54:08Z sidey79 $
 # The file is part of the SIGNALduino project
 # see http://www.fhemwiki.de/wiki/SIGNALduino
 # and was created to provide support for self build sensors.
@@ -18,7 +18,7 @@ use FHEM::Meta;
 
 #####################################
 sub
-SD_AS_Initialize($)
+SD_AS_Initialize
 {
   my ($hash) = @_;
 
@@ -65,7 +65,7 @@ SD_AS_Initialize($)
 
 #####################################
 sub
-SD_AS_Define($$)
+SD_AS_Define
 {
   my ($hash, $def) = @_;
   my @a = split("[ \t][ \t]*", $def);
@@ -85,7 +85,7 @@ SD_AS_Define($$)
 
 #####################################
 sub
-SD_AS_Undef($$)
+SD_AS_Undef
 {
   my ($hash, $name) = @_;
   delete($modules{AS}{defptr}{$hash->{CODE}}) if($hash && $hash->{CODE});
@@ -94,7 +94,7 @@ SD_AS_Undef($$)
 
 #####################################
 sub
-SD_AS_Parse($$)
+SD_AS_Parse
 {
 	my ($iohash,$msg) = @_;
 	my (undef ,$rawData) = split("#",$msg);
@@ -275,7 +275,7 @@ SD_AS_Parse($$)
 #Initial value: 0x0
 #See http://www.maxim-ic.com/appnotes.cfm/appnote_number/27
 
-sub SD_AS_crc($$)
+sub SD_AS_crc
 {
   my ($lcrc,$ldata) = @_;
   my $i;
diff --git a/FHEM/14_SD_WS07.pm b/FHEM/14_SD_WS07.pm
index 2d4f7e767..f6a656c8f 100644
--- a/FHEM/14_SD_WS07.pm
+++ b/FHEM/14_SD_WS07.pm
@@ -1,5 +1,5 @@
 ##############################################
-# $Id: 14_SD_WS07.pm 26981 2023-01-06 12:07:45Z sidey79 $
+# $Id: 14_SD_WS07.pm 26981 2023-01-09 19:54:08Z sidey79 $
 # 
 # The purpose of this module is to support serval eurochron
 # weather sensors like eas8007 which use the same protocol
@@ -57,7 +57,7 @@ sub SD_WS07_Initialize
 
 #############################
 sub
-SD_WS07_Define($$)
+SD_WS07_Define
 {
   my ($hash, $def) = @_;
   my @a = split("[ \t][ \t]*", $def);
@@ -78,7 +78,7 @@ SD_WS07_Define($$)
 
 #####################################
 sub
-SD_WS07_Undef($$)
+SD_WS07_Undef
 {
   my ($hash, $name) = @_;
   delete($modules{SD_WS07}{defptr}{$hash->{CODE}})
@@ -90,7 +90,7 @@ SD_WS07_Undef($$)
 
 ###################################
 sub
-SD_WS07_Parse($$)
+SD_WS07_Parse
 {
   my ($iohash, $msg) = @_;
   my (undef ,$rawData) = split("#",$msg);
diff --git a/FHEM/14_SD_WS09.pm b/FHEM/14_SD_WS09.pm
index eb2fa8335..4fa507c41 100644
--- a/FHEM/14_SD_WS09.pm
+++ b/FHEM/14_SD_WS09.pm
@@ -1,5 +1,5 @@
 ##############################################
-# $Id: 14_SD_WS09.pm 26980 2023-01-06 12:07:45Z sidey79 $
+# $Id: 14_SD_WS09.pm 26980 2023-01-09 19:54:08Z sidey79 $
 # 
 # The purpose of this module is to support serval 
 # weather sensors like WS-0101  (Sender 868MHz ASK   Epmfänger RX868SH-DV elv)
@@ -50,7 +50,7 @@ sub SD_WS09_Initialize {
 }
 
 #############################
-sub SD_WS09_Define($$) {
+sub SD_WS09_Define {
 	my ($hash, $def) = @_;
 	my @a = split("[ \t][ \t]*", $def);
 
@@ -72,7 +72,7 @@ sub SD_WS09_Define($$) {
 }
 
 #####################################
-sub SD_WS09_Undef($$) {
+sub SD_WS09_Undef {
 	my ($hash, $name) = @_;
 
 	delete($modules{SD_WS09}{defptr}{$hash->{CODE}})
@@ -82,7 +82,7 @@ sub SD_WS09_Undef($$) {
 }
 
 ###################################
-sub SD_WS09_Parse($$) {
+sub SD_WS09_Parse {
 	my ($iohash, $msg) = @_;
 	my $name = $iohash->{NAME};
 	my (undef ,$rawData) = split("#",$msg);
@@ -477,7 +477,7 @@ sub SD_WS09_Parse($$) {
 }
 
 ###################################
-sub SD_WS09_Attr(@) {
+sub SD_WS09_Attr {
 	my @a = @_;
 	# Make possible to use the same code for different logical devices when they
 	# are received through different physical devices.
@@ -633,14 +633,14 @@ sub SD_WS09_WindDirAverage {
 }
 
 ###################################
-sub SD_WS09_bin2dec($) {
+sub SD_WS09_bin2dec {
 	my $h = shift;
 	my $int = unpack("N", pack("B32",substr("0" x 32 . $h, -32))); 
 	return sprintf("%d", $int); 
 }
 
 ###################################
-sub SD_WS09_binflip($) {
+sub SD_WS09_binflip {
 	my $h = shift;
 	my $hlen = length($h);
 	my $i = 0;
@@ -653,7 +653,7 @@ sub SD_WS09_binflip($) {
 }
 
 ###################################
-sub SD_WS09_BCD2bin($) {
+sub SD_WS09_BCD2bin {
 	my $binary = shift;
 	my $int = unpack("N", pack("B32", substr("0" x 32 . $binary, -32)));
 	my $BCD = sprintf("%x", $int );
@@ -661,7 +661,7 @@ sub SD_WS09_BCD2bin($) {
 }
 
 ###################################
-sub SD_WS09_SHIFT($$){
+sub SD_WS09_SHIFT{
 	my ($hash, $rawData) = @_;
 	my $name = $hash->{NAME};
 	my $hlen = length($rawData);
@@ -679,7 +679,7 @@ sub SD_WS09_SHIFT($$){
 }
 
 ###################################
-sub SD_WS09_CRCCHECK($) {
+sub SD_WS09_CRCCHECK {
 	my $rawData = shift;
 	my $datacheck1 = pack( 'H*', substr($rawData,2,length($rawData)-2) );
 	my $crcmein1 = Digest::CRC->new(width => 8, poly => 0x31);
diff --git a/FHEM/14_SD_WS_Maverick.pm b/FHEM/14_SD_WS_Maverick.pm
index ca8a2a516..c267d4c45 100644
--- a/FHEM/14_SD_WS_Maverick.pm
+++ b/FHEM/14_SD_WS_Maverick.pm
@@ -1,5 +1,5 @@
 ##############################################
-# $Id: 14_SD_WS_Maverick.pm 26979 2023-01-06 12:07:45Z sidey79 $
+# $Id: 14_SD_WS_Maverick.pm 26979 2023-01-09 19:54:08Z sidey79 $
 # 
 # The purpose of this module is to support Maverick sensors
 # Sidey79 & Cruizer 2016
@@ -47,7 +47,7 @@ sub SD_WS_Maverick_Initialize
 
 #############################
 sub
-SD_WS_Maverick_Define($$)
+SD_WS_Maverick_Define
 {
   my ($hash, $def) = @_;
   my @a = split("[ \t][ \t]*", $def);
@@ -80,7 +80,7 @@ sub SD_WS_Maverick_Undef
 
 ###################################
 sub
-SD_WS_Maverick_Parse($$)
+SD_WS_Maverick_Parse
 {
   my ($iohash, $msg) = @_;
   #my $rawData = substr($msg, 2);
@@ -244,7 +244,7 @@ SD_WS_Maverick_Parse($$)
   return $name;
 }
 
-sub SD_WS_Maverick_Attr(@)
+sub SD_WS_Maverick_Attr
 {
   my ($cmd,$name,$attr_name,$attr_value) = @_;
   my $hash = $defs{$name};
@@ -259,7 +259,7 @@ sub SD_WS_Maverick_Attr(@)
   return undef;
 }
 
-sub SD_WS_Maverick_SetSensor1Inactive($){
+sub SD_WS_Maverick_SetSensor1Inactive {
   my ($hash) = @_;
   my $name = $hash->{NAME};
   Log3 $hash, 5, "$name SD_WS_Maverick_SetSensor1Inactive";
@@ -267,7 +267,7 @@ sub SD_WS_Maverick_SetSensor1Inactive($){
   SD_WS_Maverick_UpdateState($hash);
 }
 
-sub SD_WS_Maverick_SetSensor2Inactive($){
+sub SD_WS_Maverick_SetSensor2Inactive {
   my ($hash) = @_;
   my $name = $hash->{NAME};
   Log3 $hash, 5, "$name SD_WS_Maverick_SetSensor2Inactive";
@@ -275,7 +275,7 @@ sub SD_WS_Maverick_SetSensor2Inactive($){
   SD_WS_Maverick_UpdateState($hash);
 }
 
-sub SD_WS_Maverick_UpdateState($) {
+sub SD_WS_Maverick_UpdateState {
   my ($hash) = @_;
   my $name = $hash->{NAME};
   Log3 $hash, 5, "$name SD_WS_Maverick_UpdateState";
diff --git a/FHEM/41_OREGON.pm b/FHEM/41_OREGON.pm
index 05e374940..4a098ecac 100644
--- a/FHEM/41_OREGON.pm
+++ b/FHEM/41_OREGON.pm
@@ -1,5 +1,5 @@
 #################################################################################
-# $Id: 41_OREGON.pm 26978 2023-01-06 12:07:45Z sidey79 $
+# $Id: 41_OREGON.pm 26978 2023-01-09 19:54:08Z sidey79 $
 #
 # Module for FHEM to decode Oregon sensor messages
 #
@@ -64,7 +64,7 @@ sub OREGON_Initialize
 
 #####################################
 sub
-OREGON_Define($$)
+OREGON_Define
 {
   my ($hash, $def) = @_;
   my @a = split("[ \t][ \t]*", $def);
@@ -86,7 +86,7 @@ OREGON_Define($$)
 
 #####################################
 sub
-OREGON_Undef($$)
+OREGON_Undef
 {
   my ($hash, $name) = @_;
   delete($modules{OREGON}{defptr}{$name});
@@ -894,8 +894,7 @@ sub OREGON_raw {
 
 
 # -----------------------------
-sub
-OREGON_Parse($$)
+sub OREGON_Parse
 {
   my ($iohash, $msg) = @_;
 
diff --git a/controls_signalduino.txt b/controls_signalduino.txt
index 511c1bbbf..4414dfa46 100644
--- a/controls_signalduino.txt
+++ b/controls_signalduino.txt
@@ -1,18 +1,18 @@
-UPD 2023-01-07_16:06:23 235574 FHEM/00_SIGNALduino.pm
+UPD 2023-01-08_22:16:19 235483 FHEM/00_SIGNALduino.pm
 UPD 2023-01-06_12:08:43 20082  FHEM/10_FS10.pm
 UPD 2023-01-09_20:47:40 25008  FHEM/10_SD_GT.pm
 UPD 2023-01-01_18:10:40 25403  FHEM/10_SD_Rojaflex.pm
 UPD 2023-01-01_18:10:40 10096  FHEM/14_BresserTemeo.pm
 UPD 2023-01-01_18:10:40 16260  FHEM/14_FLAMINGO.pm
 UPD 2023-01-06_12:08:43 23149  FHEM/14_Hideki.pm
-UPD 2023-01-01_18:10:40 13225  FHEM/14_SD_AS.pm
+UPD 2023-01-08_22:16:19 13206  FHEM/14_SD_AS.pm
 UPD 2023-01-01_18:10:40 29419  FHEM/14_SD_BELL.pm
 UPD 2023-01-04_21:24:03 187527 FHEM/14_SD_UT.pm
 UPD 2023-01-06_12:08:43 138341 FHEM/14_SD_WS.pm
-UPD 2023-01-06_12:08:43 21042  FHEM/14_SD_WS07.pm
-UPD 2023-01-06_12:08:43 37841  FHEM/14_SD_WS09.pm
-UPD 2023-01-06_12:08:43 16476  FHEM/14_SD_WS_Maverick.pm
-UPD 2023-01-06_12:08:43 40385  FHEM/41_OREGON.pm
+UPD 2023-01-08_22:16:19 21030  FHEM/14_SD_WS07.pm
+UPD 2023-01-08_22:16:19 37810  FHEM/14_SD_WS09.pm
+UPD 2023-01-08_22:16:19 16458  FHEM/14_SD_WS_Maverick.pm
+UPD 2023-01-08_22:16:19 40373  FHEM/41_OREGON.pm
 UPD 2020-12-17_23:16:30 15582  FHEM/90_SIGNALduino_un.pm
 UPD 2023-01-06_12:08:43 236323 FHEM/lib/SD_ProtocolData.pm
 UPD 2023-01-06_12:08:43 79339  FHEM/lib/SD_Protocols.pm