Designing a host PCB to simplify wiring and putting into an enclosure.

[multigamesystem]

Ive been designing a 3D printable case for the the Pico + Dreamcast extension cable end. So far its gone pretty well with just wiring directly to the pico but after a few attempts Ive realized its easy to damage wires and the resistors are a pain point. So Ive designed a PCB to simplify the wiring. I was gonna design around the recommended 74LVC2T45DC logic package but I ran out of steam. Whoops forgot to change the text from 1 Player to 4 player. I just modified the board to have 3 more player inputs so I didnt waste time making 2 different PCBs. Oh well no big deal.

[multigamesystem]

Crap @Tails86 I accidentally wired up player 2 to GP16 + GP17 I sent off to get the boards made already. How hard is to to modify the program? Dont judge my schematic Im not an electrical engineer by any means.

[Tails86]

Not hard. Definitions are located here: https://github.com/OrangeFox86/DreamcastControllerUsbPico/blob/main/inc/configuration.h#L48

[multigamesystem]

I found those but how would I go about modifying them and recompiling into a pico program?

[Tails86]

Build instructions are on the readme: https://github.com/OrangeFox86/DreamcastControllerUsbPico?tab=readme-ov-file#build-instructions-for-linux-and-windows
I created this branch and included the uf2 files: https://github.com/OrangeFox86/DreamcastControllerUsbPico/tree/p2-pin-16/dist
(change was not tested)

[multigamesystem]

Thanks for your help @Tails86 ! Ill test and report back when the pcbs arrive. Should be here by Monday.