Skip to content

Latest commit

 

History

History
62 lines (32 loc) · 1.85 KB

File metadata and controls

62 lines (32 loc) · 1.85 KB

Logitech G PRO RS Wheel Hub wall mount

Logitech G PRO RS Wheel Hub wall mount 01 Logitech G PRO RS Wheel Hub wall mount 02 Logitech G PRO RS Wheel Hub wall mount 03


Attribution

The following text must be included in any distribution of derivatives of this board. All links must also be included.

Based on the Logitech G PRO RS Wheel Hub wall mount by TheTrain

Copyright © 2024 TheTrain

Licensed under CC BY 4.0

Changes from the original design:

  • list any changes you make here

Summary

This is a wall mount system for the new Logitech G PRO RS wheel hubs.

While some inspiration was taken from various paid models that I saw online, all measurements were taken by myself and the 3D models created from scratch in Fusion360.

Included with this is both a blank center cap and one with the Logitech ‘G’ logo.

The center cap is not needed and only there for vanity.

A full set of printing STLs, 3MFs as well as source STEP files are provided with this.

To assemble the Logitech G PRO RS Wheel Hub wall mount it is also recommended to have:

  • 1x M4 18mm countersunk bolt
  • 1x M4 flange nut

Printing tips

Print with 6x walls to ensure solid sides.

I printed this originally on my Bambu X1C with matte black PLA.

Donations

Donations are not necessary but always welcome! All received donations will be used for further prototyping.

https://www.paypal.com/donate/?hosted_button_id=2JMTZVCGLDYC2

Revision History

v1.0

  • Initial open source design

Acknowledgments

  • TheTrain for doing the original design