Skip to content

Latest commit

 

History

History
64 lines (38 loc) · 2.34 KB

File metadata and controls

64 lines (38 loc) · 2.34 KB

3D Printable Stand

3D Printable Stand 3D Printable Stand Front 3D Printable Stand Back 3D Printable Stand 3D Printable Stand Front


Attribution

The following text must be included in any distribution of derivatives of this design. All links must also be included.

Based on the Open Stick 3D Printable Stand by TheTrain

Copyright © 2023 TheTrain

Licensed under CC BY 4.0

Changes from the original design:

  • list any changes you make here

Summary

These are two 3D Printable Stands in small (and large), but well balanced, designs for holding sticks like the Open_Core0, Flatbox and other small (and large) board designs.

Printing tips

Here are my printing specs Printer: Bambu Lab X1C Nozzle: 0.2mm steel Sheet: Textured PEI Filament: Bambu Lab Matte Black PLA Layer height: 0.1mm Outer walls: 6 Infill percentage: 15% Infill type: Honeycomb

If printing on a larger nozzle like the 0.4mm you can do 3 outer walls.

Sales recommendations

These should be included at little to no cost with existing orders.

You are free to set your own price as you see fit.

Donations

Donations are not necessary but always welcome! All received donations will be used to try out new designs or send things to people for testing, iterations and helping people get board setups that might not be in an economic position to get one themselves.

https://www.paypal.com/donate/?hosted_button_id=2JMTZVCGLDYC2

Revision History

v1.0

  • Initial open source design

Acknowledgments