OpenEVSE
Rapi command for testing the "StuckRelay" or other initial test. #27
-
|
Hello, |
Beta Was this translation helpful? Give feedback.
Replies: 1 comment 1 reply
-
|
OpenEVSE runs tests on boot, continuously and prior to closing the relay based on UL requirements. All tests are automatic, there is no way to trigger a specific test. -Stuck Relay is running continuously anytime the relay should be open. A flow chart of all the safety tests is here: Here is a Knowledge Base article: |
Beta Was this translation helpful? Give feedback.
-
|
OK, thanks for support. |
Beta Was this translation helpful? Give feedback.
OpenEVSE runs tests on boot, continuously and prior to closing the relay based on UL requirements. All tests are automatic, there is no way to trigger a specific test.
-Stuck Relay is running continuously anytime the relay should be open.
-Ground Monitoring is running continuously anytime the relay is closed "while charging" a hardware update will be coming soon to ground test "always" per an recent UL update.
-GFCI Self test is run on boot and any time prior to closing the relay
A flow chart of all the safety tests is here:
https://openev.freshdesk.com/helpdesk/attachments/6061015834
Here is a Knowledge Base article:
https://openev.freshdesk.com/en/support/solutions/articles/6000113537-o…