Installation

Hints how to set up the Arduino-IDE, install the project files and program the Arduino:

1. Download the Arduino-IDE for your operating system from arduino.cc or arduino.org. Follow the instructions and get started.
2. Launch the Arduino-IDE and get used to it. Load an example (like blink sketch), connect the controller board and upload the program.
3. When familiar with your tools, download the ED_BMDdiag-Repo and unzip it. Copy the content - the file structure within the arduino folder should look like this:

4. If the Arduino-IDE was running close and reopen it. Load the ED_BMSdiag.ino sketch, compile and flash it. 5. Analyze your battery...