ism

---

ISM Click

ISM Click demo application is developed using the NECTO Studio, ensuring compatibility with mikroSDK's open-source libraries and tools. Designed for plug-and-play implementation and testing, the demo is fully compatible with all development, starter, and mikromedia boards featuring a mikroBUS™ socket.

---

Click Library

• Author : Nenad Filipovic
• Date : Mar 2021.
• Type : SPI type

Software Support

Example Description

This library contains API for the ISM Click driver. This example transmits/receives and processes data from ISM Clicks.

Example Libraries

• MikroSDK.Board
• MikroSDK.Log
• Click.Ism

Example Key Functions

• ism_cfg_setup Config Object Initialization function.

void ism_cfg_setup ( ism_cfg_t *cfg );

• ism_init Initialization function.

err_t ism_init ( ism_t *ctx, ism_cfg_t *cfg );

• ism_default_cfg Click Default Configuration function.

void ism_default_cfg ( ism_t *ctx );

• ism_device_config ISM device configuration function.

err_t ism_device_config ( ism_t *ctx );

• ism_receive_packet ISM receive packet function.

err_t ism_receive_packet ( ism_t *ctx, uint8_t *rx_data );

• ism_transmit_packet ISM transmit package function.

err_t ism_transmit_packet ( ism_t *ctx, uint8_t type, uint8_t *tx_data, uint8_t len );

Application Init

Initializes driver and performs the default configuration.

void application_init ( void ) 
{
    log_cfg_t log_cfg;  /**< Logger config object. */
    ism_cfg_t ism_cfg;  /**< Click config object. */

    /** 
     * Logger initialization.
     * Default baud rate: 115200
     * Default log level: LOG_LEVEL_DEBUG
     * @note If USB_UART_RX and USB_UART_TX 
     * are defined as HAL_PIN_NC, you will 
     * need to define them manually for log to work. 
     * See @b LOG_MAP_USB_UART macro definition for detailed explanation.
     */
    LOG_MAP_USB_UART( log_cfg );
    log_init( &logger, &log_cfg );
    log_info( &logger, " Application Init " );

    // Click initialization.
    ism_cfg_setup( &ism_cfg );
    ISM_MAP_MIKROBUS( ism_cfg, MIKROBUS_1 );
    if ( SPI_MASTER_ERROR == ism_init( &ism, &ism_cfg ) ) 
    {
        log_error( &logger, " Application Init Error. " );
        log_info( &logger, " Please, run program again... " );
        for ( ; ; );
    }

    ism_default_cfg ( &ism );
    Delay_ms ( 100 );
    
#ifdef DEMO_APP_TRANSMITTER
    ism_switch_tx_mode( &ism );
    log_printf( &logger, " Application Mode: Transmitter\r\n" );
#else
    ism_switch_rx_mode( &ism );
    log_printf( &logger, " Application Mode: Receiver\r\n" );
#endif
    log_info( &logger, " Application Task " );
}

Application Task

Transmitter/Receiver task depends on uncommented code. Receiver logging each received byte to the UART for data logging, while transmitter send messages every 1 second.

void application_task ( void ) 
{
#ifdef DEMO_APP_TRANSMITTER
    ism_transmit_packet( &ism, ISM_CMD_W_TX_PAYLOAD_NOACK, demo_message_1, 9 );
    log_printf( &logger, "  Tx : %s", demo_message_1 );
    Delay_ms ( 1000 );

    ism_transmit_packet( &ism, ISM_CMD_W_TX_PAYLOAD_NOACK, demo_message_2, 12 );
    log_printf( &logger, "  Tx : %s", demo_message_2 );
    Delay_ms ( 1000 );
#else
    uint8_t rx_buf[ ISM_MAX_PACKET_LEN ] = { 0 };

    ism_receive_packet( &ism, &rx_buf[ 0 ] );

    if ( rx_buf[ 0 ] ) 
    {
        log_printf( &logger, "  Rx : %s", rx_buf );
    }
#endif
}

Application Output

This Click board can be interfaced and monitored in two ways:

• Application Output - Use the "Application Output" window in Debug mode for real-time data monitoring. Set it up properly by following this tutorial.
• UART Terminal - Monitor data via the UART Terminal using a USB to UART converter. For detailed instructions, check out this tutorial.

Additional Notes and Information

The complete application code and a ready-to-use project are available through the NECTO Studio Package Manager for direct installation in the NECTO Studio. The application code can also be found on the MIKROE GitHub account.

---