Share Your New Phoniebox Designs 2021/2022 here!!!

[MiczFlor]

Hi Phonieboxers,

please add your latest designs of finished Phonieboxes in this thread (Everyone builds an original!). Some of these will make it into the new calendar 2022 coming out shortly before Christmas. See last years calendars here by clicking on 2021, 2020 and 2019 - which was the first calendar I did.

If you uploaded your designs already to the latest thread (Pictures of Phonieboxes for inspiration 2020/2021), you don't need to upload them again - I will be looking through this fountain of insipration as well :)

I keep starting new threads, because there is soooo much coming :) Here you can find older boxes of wonderful Phoniebox designs: Started 2017 as well as the link above from 2019-2021

[Lippsson]

First, I have to say a big thank you for all developer who are involved in this project. You did us very happy.
I had no time right now to build a own box, so i integraded my on the childrens player. You can also find a video here:
https://youtu.be/VqQN8SAZB8w

I have another Phoniebox who need a better case. But for now, its works also preddy good:

[netzbasteln]

Built a couple of speakers with Tonuino and one Phoniebox a few weeks before the pandemic started in Winter 2019/2020. More documentation in Episode 137 of my makers radio show / podcast "Netzbasteln" at Deutschlanfunk Nova.

[pabera]

After a few early attempts using wood or a small suitcase, I ended up using the old cassette recorder that was not intact anymore. I was lucky that all the equipment I had bought before would still fit into the small case. The components are rather standard as I wanted it work without much technical difficulties. But, it's already running on Version 3 😉.

My components are:

• Raspberry Pi 3 B+
• USB RFID Card Reader EM4100
• Stereo Speakers (6 Watt, 3,5mm, USB Power supply)
• USB Sound Card (for out and in)
• Audio Noise Filter
• Power Bank USB 10000mAh
• GPIO Arcade Buttons

Luckily I found a battery with the right form-factor to be put into the old battery slot where 4 LR20 batteries were placed before. I had to disassemble the Card Reader and placed in the old cassette storage (I cannot be opened anymore). The original buttons were physical buttons before moving actual parts in the old cassette recorder. Since all this inner stuff is gone, I had to find a new way to fix the buttons on top of arcade buttons (I only used the actual button). Some old LEGO bricks did the trick. Unfortunately, I didn't have much room to place the speakers better. But the sound turned out to be alright. As soon V3 supports recording with a microphone, I will add them back as well.

Thanks for this wonderful project.. another box is on its way! All the best

[MiczFlor]

The noise cancellation thingy in the battery slot really looks like it's meant to be that way :)

[pabera]

It's the actual battery. I tried to find a battery with exactly the same form factor and I was lucky ;-)

[arvidortwig]

Thank you very much for this wonderful project and providing so much fun to me and my family while keeping data private. I am a keen user of open source software and even a bigger admirer of OSS developers ! Keep up the good work !

more info at: https://arvidortwig.de/2021/10/18/diy-musicplayer-for-kids-phoniebox/

[rmk-ch]

Hi all
We are three engineers (mechanical, timber, electrical) and built three Phonieboxes by using a CAD model to prepare the tooling, a 5-axes CNC milling machine for the nice outerior, a laser cutter (wood for internal "dirty" work and plexiglass for the front details) with only minor soldering. We also turned (german: drehen) an aluminium piece (the nose) and anodized them (eloxieren). The ears (that hide forward/backward buttons) and tail as well as the handle are leather.
But have a look yourself:

Thank you very much for this amazing idea with all background information and software!! We had much fun building and the kids use it almost daily for over half a year!

[lenlennart]

A more practical approach with drawers to store all the cards :-)
Bought the "housing" at Woolworth for 5€.
Currently the box is wired, but i am thinking about sacrificing another drawer for a powerbank.

[gsandreas]

Hello,

I want to Share my Project, in which I've build 3 Phonieboxes.
Here is my Hardwareconfiguration:

Powerbank:
https://www.amazon.de/-/en/iPosible-Wireless-Charging-External-Compatible/dp/B093BMFRZ6/ref=pd_sbs_3/259-7784409-7589651?pd_rd_w=lC75U&pf_rd_p=b2a25e73-6e6a-41bb-a7ce-5f2d2342b819&pf_rd_r=ZEYBGWB5TJQA82BESRN9&pd_rd_r=0aa5502c-d384-4bcc-8161-f8d81354dbf1&pd_rd_wg=yccTY&pd_rd_i=B093BMFRZ6&th=1

RFID
https://www.waveshare.com/pn532-nfc-hat.htm

USB einbaubuchse
https://www.amazon.de/-/en/gp/product/B075P2S4Z5/ref=ox_sc_act_image_1?smid=AYCNWAMVTN6IC&psc=1

Soundkarte:
https://www.berrybase.de/raspberry-pi/raspberry-pi-computer/gpio-hats-phats/audio/wm8960-hi-fi-stereo-sound-hat-f-252-r-raspberry-pi
Artikel-Nr.: RPI-STAHAT
56 ab Lager lieferbar. / Lieferzeit 1-3 Werktage
15,90 €
15,90 €

Raspberry Pi Zero
https://www.berrybase.de/raspberry-pi/raspberry-pi-computer/boards/raspberry-pi-zero-wh
Artikel-Nr.: RPIZ-WH
4785 ab Lager lieferbar. / Lieferzeit 1-3 Werktage
14,90 €
14,90 €

USB Adapter
https://www.berrybase.de/raspberry-pi/raspberry-pi-computer/kabel-adapter/usb-kabel-adapter/usb-2.0-hi-speed-otg-adapterkabel-a-buchse-micro-b-stecker-0-15m-wei-223
Artikel-Nr.: 125175
2810 ab Lager lieferbar. / Lieferzeit 1-3 Werktage
1,80 €
1,80 €

SMA - Adapter
https://www.berrybase.de/raspberry-pi/raspberry-pi-computer/bauelemente/u.fl-steckverbinder-stecker-50-937-gerade-smd
Artikel-Nr.: UFLS-SMD
285 ab Lager lieferbar. / Lieferzeit 1-3 Werktage
0,78 €
1,56 €

WLAN Antenne
https://www.berrybase.de/audio-video/antennen/mhfu.fl/pcb-wlan-antenne-2.4ghz-u.fl-anschluss
Artikel-Nr.: WRL-18086
50 ab Lager lieferbar. / Lieferzeit 1-3 Werktage
1,30 €
1,30 €

MicroSD - Karte
https://www.berrybase.de/raspberry-pi/raspberry-pi-computer/speicherkarten/sandisk-high-endurance-microsdxc-uhs-i-u3-speicherkarte-43-adapter-64gb
Artikel-Nr.: 619659173081
124 ab Lager lieferbar. / Lieferzeit 1-3 Werktage
13,42 €
13,42 €
Einbauklinkenbuchse:
https://www.berrybase.de/bauelemente/steckverbinder/audio-video-steckverbinder/klinken-steckverbinder/einbau-klinkenbuchse-3-5mm-4-polig-metallausf-252-hrung-l-246-tmontage
Artikel-Nr.: EKBU35M4
106 ab Lager lieferbar. / Lieferzeit 1-3 Werktage
2,25 €
2,25 €

Prototypenboard:
https://www.amazon.de/gp/product/B08C4XLT44/ref=crt_ewc_img_huc_1?ie=UTF8&smid=A187Y4UVM6ZA0X&th=1

RFDI Karten
https://www.amazon.de/gp/product/B07TVJPTM7/ref=crt_ewc_img_dp_2?ie=UTF8&psc=1&smid=A1X7QLRQH87QA3cmx
Ein Aus Button mit Soft off:
https://www.berrybase.de/raspberry-pi/raspberry-pi-computer/gpio-hats-phats/power-management/onoff-shim-f-252-r-raspberry-pi

---

Und hier meine Softwarekonfiguration:

Die SD Card enthält nun zwei Partitionen/Laufwerke, das erste Laufwerk ist unter alle Betriebssystemen lesbar. In diesem Laufwerk (/boot) müssen jetzt noch zwei Dateien erzeugt werden:
• eine leere Datei mit dem Namen ssh um den (headless) Zugriff per ssh zu ermöglichen (Achtung Dateiendung entfernen).
Hinweis: Eine spätere Aktivierung von SSH ist mit sudo raspi-config (Punkt 5 "Interfacing Options", dann Punkt 2 SSH) möglich, erfordert dann aber Tastatur und Monitor am RPi.
• eine Textdatei im Linux Format mit Namen wpa_supplicant.conf und folgendem Inhalt wenn der Pi sofort mit wlan starten soll (hier ebenfalls die txt endung enfernen und als .conf Datei mit dem Notepad++ abspeichern).
country=DE
ctrl_interface=DIR=/var/run/wpa_supplicant GROUP=netdev
update_config=1
network={
ssid="WLAN_NAME"
psk="WLANPASSWORT"
}
#Netzwerkkabel anstecker (oder auf WLAN HOFFEN) RPI Booten, In Router nach der IP Suchen und einen SSH Tunnel mit MobaXTerm zum RPI aufbauen. Nutzer ist pi Passwort ist raspberry Eingabe wird nicht angezeigt, mit Enter bestätigen
pi@192.168.0.116's password:
┌────────────────────────────────────────────────────────────────────┐
│ • MobaXterm 12.4 • │
│ (SSH client, X-server and networking tools) │
│ │
│ → SSH session to pi@192.168.0.116 │
│ • SSH compression : v │
│ • SSH-browser : v │
│ • X11-forwarding : v (remote display is forwarded through SSH) │
│ • DISPLAY : v (automatically set on remote server) │
│ │
│ → For more info, ctrl+click on help or visit our website │
└────────────────────────────────────────────────────────────────────┘

Linux raspberrypi 5.10.63+ #1459 Wed Oct 6 16:40:27 BST 2021 armv6l

The programs included with the Debian GNU/Linux system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.

Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.

/usr/bin/xauth: file /home/pi/.Xauthority does not exist

SSH is enabled and the default password for the 'pi' user has not been changed.
This is a security risk - please login as the 'pi' user and type 'passwd' to set a new password.

#In einem zweiten Terminalfenster den Prozessmonitor aufmachen:
pi@raspberrypi:~ $ htop

CPU[|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||100.0%] Tasks: 41, 7 thr; 1 running
Mem[||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||| 66.7M/430M] Load average: 1.48 1.21 0.78
Swp[| 768K/100.0M] Uptime: 00:08:18

PID USER PRI NI VIRT RES SHR S CPU%▽MEM% TIME+ Command
1 root 20 0 34852 8520 6624 R 85.2 1.9 0:21.87 /sbin/init
243 messagebu 20 0 7680 3372 2884 R 4.9 0.8 0:03.29 /usr/bin/dbus-daemon --system --address=systemd: --nofork --nopidfile --systemd-activation --syslog-only
1229 root 20 0 11520 3792 3176 S 3.7 0.9 0:00.12 systemctl --system --preset-mode=enable-only preset unattended-upgrades.service
1219 pi 20 0 9188 3796 2636 R 2.5 0.9 0:00.35 htop
300 root 20 0 13004 5840 5220 S 1.9 1.3 0:01.86 /lib/systemd/systemd-logind
1201 pi 20 0 14660 5176 4112 S 0.6 1.2 0:00.09 sshd: pi@pts/2
99 root 20 0 62048 7652 6960 S 0.0 1.7 0:02.13 /lib/systemd/systemd-journald
119 root 20 0 19556 4300 3120 S 0.0 1.0 0:01.46 /lib/systemd/systemd-udevd
241 avahi 20 0 6896 2960 2608 S 0.0 0.7 0:00.68 avahi-daemon: running [raspberrypi.local]
242 root 20 0 8184 2392 2180 S 0.0 0.5 0:00.03 /usr/sbin/cron -f
245 avahi 20 0 6736 1204 984 S 0.0 0.3 0:00.00 avahi-daemon: chroot helper
284 root 20 0 25768 3664 2844 S 0.0 0.8 0:00.27 /usr/sbin/rsyslogd -n -iNONE
302 nobody 20 0 5296 2148 1960 S 0.0 0.5 0:00.04 /usr/sbin/thd --triggers /etc/triggerhappy/triggers.d/ --socket /run/thd.socket --user nobody --deviceglob /dev
304 root 20 0 25768 3664 2844 S 0.0 0.8 0:00.07 /usr/sbin/rsyslogd -n -iNONE
305 root 20 0 25768 3664 2844 S 0.0 0.8 0:00.02 /usr/sbin/rsyslogd -n -iNONE
310 root 20 0 11736 4488 4076 S 0.0 1.0 0:00.09 /sbin/wpa_supplicant -u -s -O /run/wpa_supplicant
311 root 20 0 25768 3664 2844 S 0.0 0.8 0:00.11 /usr/sbin/rsyslogd -n -iNONE
348 root 20 0 27680 1400 1276 S 0.0 0.3 0:00.06 /usr/sbin/rngd -r /dev/hwrng
349 root 20 0 27680 1400 1276 S 0.0 0.3 0:00.05 /usr/sbin/rngd -r /dev/hwrng
350 root 20 0 27680 1400 1276 S 0.0 0.3 0:00.00 /usr/sbin/rngd -r /dev/hwrng
351 root 20 0 27680 1400 1276 S 0.0 0.3 0:00.00 /usr/sbin/rngd -r /dev/hwrng
355 root 20 0 4468 1740 1636 S 0.0 0.4 0:00.02 /sbin/agetty -o -p -- \u --noclear tty1 linux
383 root 20 0 2040 532 500 S 0.0 0.1 0:00.00 /usr/bin/hciattach /dev/serial1 bcm43xx 3000000 flow - b8:27:eb:9a:73:c3
406 root 20 0 21144 7744 6904 S 0.0 1.8 0:00.32 /usr/libexec/bluetooth/bluetoothd
410 root 20 0 11980 3924 3320 S 0.0 0.9 0:00.04 wpa_supplicant -B -c/etc/wpa_supplicant/wpa_supplicant.conf -iwlan0
562 root 20 0 2892 1672 1428 S 0.0 0.4 0:00.02 /usr/sbin/dhcpcd -w
693 root 20 0 12360 6060 5388 S 0.0 1.4 0:00.17 sshd: /usr/sbin/sshd -D [listener] 0 of 10-100 startups
705 root 20 0 14464 7092 6148 S 0.0 1.6 0:04.92 sshd: pi [priv]
707 root 20 0 14440 7056 6120 S 0.0 1.6 0:03.21 sshd: pi [priv]
710 pi 20 0 14308 7316 6476 S 0.0 1.7 0:00.93 /lib/systemd/systemd --user
711 pi 20 0 38304 3712 1692 S 0.0 0.8 0:00.00 (sd-pam)
737 pi 20 0 14756 5056 3964 S 0.0 1.1 0:00.31 sshd: pi@pts/0
738 pi 20 0 14440 4464 3528 S 0.0 1.0 0:00.02 sshd: pi@notty
739 pi 20 0 4496 3572 3256 S 0.0 0.8 0:00.07 /usr/lib/openssh/sftp-server
740 pi 20 0 8448 3732 2888 S 0.0 0.8 0:00.43 -bash
883 root 20 0 13004 4248 3764 S 0.0 1.0 0:00.09 sudo apt-get install unattended-upgrades apt-config-auto-update
884 root 20 0 56880 48548 39648 S 0.0 11.0 0:07.45 apt-get install unattended-upgrades apt-config-auto-update
977 root 20 0 10016 3524 2060 S 0.0 0.8 0:00.13 /usr/bin/dpkg --status-fd 18 --configure --pending
1001 root 20 0 14468 7080 6132 S 0.0 1.6 0:02.99 sshd: pi [priv]
1004 root 20 0 20632 13420 5004 S 0.0 3.1 0:02.98 /usr/bin/perl -w /usr/share/debconf/frontend /var/lib/dpkg/info/unattended-upgrades.postinst configure
1032 systemd-t 20 0 22224 5436 4880 S 0.0 1.2 0:00.63 /lib/systemd/systemd-timesyncd
1040 root 20 0 1960 1348 1240 S 0.0 0.3 0:00.02 /bin/sh /var/lib/dpkg/info/unattended-upgrades.postinst configure
1061 systemd-t 20 0 22224 5436 4880 S 0.0 1.2 0:00.00 /lib/systemd/systemd-timesyncd
1153 root 20 0 14440 6996 6060 S 0.0 1.6 0:03.12 sshd: pi [priv]
1202 pi 20 0 8448 3732 2888 S 0.0 0.8 0:00.34 -bash
1226 pi 20 0 14440 4416 3480 S 0.0 1.0 0:00.01 sshd: pi@notty
1227 pi 20 0 4496 3452 3136 S 0.0 0.8 0:00.04 /usr/lib/openssh/sftp-server
1228 root 20 0 14184 7780 4452 S 0.0 1.8 0:01.01 /usr/bin/perl /usr/bin/deb-systemd-helper enable unattended-upgrades.service

F1Help F2Setup F3SearchF4FilterF5Tree F6SortByF7Nice -F8Nice +F9Kill F10Quit

#im ersten Terminalfenster mit "passwd pi" passwort von pi ändern
pi@raspberrypi:~ $ passwd pi
Changing password for pi.
Current password:
New password:
Retype new password:
passwd: password updated successfully
#Updaten:
pi@raspberrypi:~ $ sudo apt-get update
pi@raspberrypi:~ $ sudo apt-get upgrade
pi@raspberrypi:~ $ sudo apt-get dist-upgrade
#FIrmwareupdate:
pi@raspberrypi:~ $ sudo rpi-update
pi@raspberrypi:~ $ sudo reboot
-> sudo apt-get update; sudo apt-get upgrade; sudo apt-get dist-upgrade; sudo rpi-update; sudo reboot
#Automatische updates
pi@raspberrypi:~ $ sudo apt-get install unattended-upgrades apt-config-auto-update
#Automatische update konfiguration erstellen
pi@raspberrypi:~ $ sudo dpkg-reconfigure -plow unattended-upgrades
Mit ja bestätigen
pi@raspberrypi:~ $ nano /etc/apt/apt.conf.d/20auto-upgrades
APT::Periodic::Update-Package-Lists "1"; #Tägliches apt-get update
APT::Periodic::Unattended-Upgrade "1"; # täglich upgrade

pi@raspberrypi:~ $ sudo unattended-upgrade --dry-run #Trockenlauf

pi@raspberrypi:~ $ tail /var/log/unattended-upgrades/unattended-upgrades.log
2018-11-24 20:58:58,424 INFO No packages found that can be upgraded unattended and no pending auto-removals
2018-11-24 20:59:10,396 INFO Initial blacklisted packages:
2018-11-24 20:59:10,398 INFO Initial whitelisted packages:
2018-11-24 20:59:10,399 INFO Starting unattended upgrades script
2018-11-24 20:59:10,399 INFO Allowed origins are: ['origin=Debian,codename=stretch,label=Debian-Security']
2018-11-24 20:59:45,130 INFO Initial blacklisted packages:
2018-11-24 20:59:45,132 INFO Initial whitelisted packages:
2018-11-24 20:59:45,133 INFO Starting unattended upgrades script
2018-11-24 20:59:45,134 INFO Allowed origins are: ['origin=Debian,codename=stretch,label=Debian-Security']
2018-11-24 21:00:00,444 INFO No packages found that can be upgraded unattended and no pending auto-removals

Zeitzone einstellen & Zeitsynchronisierung über das Internet aktivieren

pi@raspberrypi:~ $ sudo -i
root@raspberrypi:~ $ timedatectl set-timezone Europe/Berlin
root@raspberrypi:~ $ timedatectl set-ntp true

Konfigurieren lokale Sprache deutsch

root@raspberrypi:~ $ sed -i -e 's/# de_DE.UTF-8 UTF-8/de_DE.UTF-8 UTF-8/' /etc/locale.gen

Type and grab a coffee:

root@raspberrypi:~ $ locale-gen
Generating locales (this might take a while)...
de_DE.UTF-8...# done
en_GB.UTF-8... done
Generation complete.
root@raspberrypi:~ $ localectl set-locale LANG=de_DE.UTF-8 LANGUAGE=de_DE

Hostname

root@raspberrypi:~ $ hostnamectl set-hostname PhonieBox
#Neustart
root@raspberrypi:~ $ reboot
--> sudo apt-get install unattended-upgrades apt-config-auto-update; sudo dpkg-reconfigure -plow unattended-upgrades; sudo -i;

--> timedatectl set-timezone Europe/Berlin; timedatectl set-ntp true; sed -i -e 's/# de_DE.UTF-8 UTF-8/de_DE.UTF-8 UTF-8/' /etc/locale.gen; locale-gen; localectl set-locale LANG=de_DE.UTF-8 LANGUAGE=de_DE; hostnamectl set-hostname PhonieBoxSonja; sudo reboot
SSH zugang absichern
andreas@raspberrypi:~ $ sudo nano /etc/ssh/sshd_config
#LoginGraceTime 2m
PermitRootLogin no
#StrictModes yes
#MaxAuthTries 6
#MaxSessions 10
#Bruteforce aussperren
andreas@raspberrypi:~ $ sudo apt-get install fail2ban
#Python installieren
pi@PhonieBoxSonja:~ $ sudo apt-get install python
pi@PhonieBoxSonja:~ $ sudo apt-get install python-pip
#Python3 installieren
pi@PhonieBoxSonja:~ $ sudo apt-get install python3
pi@PhonieBoxSonja:~ $ sudo apt-get install python3-pip
#Python setuptools nstallieren
pi@PhonieBoxSonja:~ $ sudo apt-get install python3-setuptools
#Falls der RFID - Service nicht startet fehlt evtl. die evDEV Modul:
pi@PhonieBoxSonja:/RPi-Jukebox-RFID/scripts $ pip install evdev
Looking in indexes: https://pypi.org/simple, https://www.piwheels.org/simple
Collecting evdev
Downloading https://www.piwheels.org/simple/evdev/evdev-1.4.0-cp39-cp39-linux_armv6l.whl (83 kB)
|████████████████████████████████| 83 kB 198 kB/s
Installing collected packages: evdev
Successfully installed evdev-1.4.0
#RPI.GPIO Installieren
pi@PhonieBoxSonja: $ pip install RPi.GPIO
#GitHuB Installieren
pi@PhonieBoxSonja:~ $ sudo apt-get install git
#I2C Tools installieren:
pi@PhonieBoxSonja:~ $ sudo apt-get install i2c-tools
#I2C Interface auf Raspi Freischalten:
pi@PhonieBoxSonja:~ $ sudo raspi-config nonint do_i2c 0
#I2C Geräte erkennen (0x1A WM8960 Soundkarte, 0x24 PN532 NFC HAT)
pi@PhonieBoxSonja:~ $ i2cdetect -y 1
0 1 2 3 4 5 6 7 8 9 a b c d e f
00: -- -- -- -- -- -- -- --
10: -- -- -- -- -- -- -- -- -- -- 1a -- -- -- -- --
20: -- -- -- -- 24 -- -- -- -- -- -- -- -- -- -- --
30: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
40: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
50: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
60: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
70: -- -- -- -- -- -- -- --

#WM8960 HAT Stecken und Soundkartentreiber installieren:
andreas@raspberrypi:~ $ git clone https://github.com/waveshare/WM8960-Audio-HAT
andreas@raspberrypi:~ $ cd WM8960-Audio-HAT
andreas@raspberrypi:~ $ sudo ./install.sh
andreas@raspberrypi:~ $ sudo reboot
--> sudo apt-get --yes --force-yes install fail2ban; sudo apt-get --yes --force-yes install python; sudo apt-get --yes --force-yes install python-pip; sudo apt-get --yes --force-yes install python3; sudo apt-get --yes --force-yes install python3-pip; sudo apt-get --yes --force-yes install python3-setuptools; sudo pip install evdev; sudo pip install RPi.GPIO; sudo apt-get --yes --force-yes install git; sudo apt-get --yes --force-yes install i2c-tools; sudo raspi-config nonint do_i2c 0; sudo i2cdetect -y 1; git clone https://github.com/waveshare/WM8960-Audio-HAT; cd WM8960-Audio-HAT; sudo ./install.sh; sudo reboot
#Überprüfen, ob der Treiber installiert ist:
pi@PhonieBoxSonja:~ $ cd WM8960-Audio-HAT
pi@PhonieBoxSonja:/WM8960-Audio-HAT $ sudo dkms status
wm8960-soundcard, 1.0, 5.10.63+, armv6l: installed (original_module exists)
#Überprüfen des Status der Soundkarte:
pi@PhonieBoxSonja:/WM8960-Audio-HAT $ aplay -l
**** Liste der Hardware-Geräte (PLAYBACK) ****
Karte 0: vc4hdmi [vc4-hdmi], Gerät 0: MAI PCM i2s-hifi-0 [MAI PCM i2s-hifi-0]
Sub-Geräte: 1/1
Sub-Gerät #0: subdevice #0
Karte 1: wm8960soundcard [wm8960-soundcard], Gerät 0: bcm2835-i2s-wm8960-hifi wm8960-hifi-0 [bcm2835-i2s-wm8960-hifi wm8960-hifi-0]
Sub-Geräte: 1/1
Sub-Gerät #0: subdevice #0
pi@PhonieBoxSonja:/WM8960-Audio-HAT $ arecord -l
**** Liste der Hardware-Geräte (CAPTURE) ****
Karte 1: wm8960soundcard [wm8960-soundcard], Gerät 0: bcm2835-i2s-wm8960-hifi wm8960-hifi-0 [bcm2835-i2s-wm8960-hifi wm8960-hifi-0]
Sub-Geräte: 1/1
Sub-Gerät #0: subdevice #0
#Einstellen des Mixers und der Lautstärken:
pi@PhonieBoxSonja:/WM8960-Audio-HAT $ sudo alsamixer

┌──────────────────────────────────────────────────────── AlsaMixer v1.2.4 ────────────────────────────────────────────────────────┐
│ Gerät: wm8960-soundcard F1: Hilfe │
│ Chip: F2: System-Informationen │
│ Ansicht: F3:[Wiedergabe] F4: Aufnahme F5: Alle F6: Soundkarte auswählen │
│ Element: Headphone [dB-Änderung: -12,00; -12,00] Esc: Beenden │
│ │
│ │
│ ┌──┐ ┌──┐ ┌──┐ ┌──┐ ┌──┐ ┌──┐ │
│ │ │ │ │ │ │ │ │ │▒▒│ │ │ │
│ │ │ │ │ │ │ │ │ │▒▒│ │ │ │
│ │ │ │ │ │ │ │ │ │▒▒│ │ │ │
│ │ │ │ │ │▒▒│ │▒▒│ │▒▒│ │ │ →
│ │ │ │ │ │▒▒│ │▒▒│ │▒▒│ │ │ →
│ │ │ │ │ │▒▒│ │▒▒│ │▒▒│ │ │ →
│ │ │ │ │ │▒▒│ │▒▒│ │▒▒│ │ │ →
│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │ │ →
│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │ │ →
│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │ │ →
│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │ │ →
│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │ │ │
│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │ │ │
│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │ │ │
│ └──┘ ┌──┐ └──┘ └──┘ └──┘ ┌──┐ ┌──┐ ┌──┐ ┌──┐ └──┘ ├──┤ Low High Left Dat │
│ │MM│ │MM│ │MM│ │MM│ │MM│ │MM│ │
│ └──┘ └──┘ └──┘ └──┘ └──┘ └──┘ │
│ 50<>50 50<>50 80 80 100<>100 0 │
│ Headphon Speaker Speaker Speaker Speaker PCM Play Mono Out Mono Out Playback 3D 3D Filte 3D Filte ADC Data │
│ │
│ │
└──────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────┘

#Setzen der Standardsoundkarte
pi@PhonieBoxSonja:~ $ sudo nano /usr/share/alsa/alsa.conf
#In der Datei die beiden ausdrücke suchen und von 0-->1 ändern
defaults.ctl.card 1
defaults.pcm.card 1
#MP3 Player installieren:
pi@PhonieBoxSonja:~ $ sudo apt-get install mpg123
#MP3 Player testen:
pi@PhonieBoxSonja:~ $ sudo mpg123 test.mp3
#Bibliotheken installieren
pi@PhonieBoxSonja:~ $ sudo apt-get install libasound2-dev

#RFID - Read installieren:
#RPI.GPIO installieren

#Phoniebox installieren:
pi@PhonieBoxSonja:~ $ cd; rm buster-install-*; wget https://raw.githubusercontent.com/MiczFlor/RPi-Jukebox-RFID/master/scripts/installscripts/buster-install-default.sh; chmod +x buster-install-default.sh; ./buster-install-default.sh

DONE. Let the sounds begin.
Find more information and documentation on the github account:
https://github.com/MiczFlor/RPi-Jukebox-RFID/wiki/
Reboot is needed to activate all settings
Would you like to reboot now? [Y/n] y
Done (in 0h 37m 1s).

--> sudo apt-get --yes --force-yes install libasound2-dev; cd; rm buster-install-*; wget https://raw.githubusercontent.com/MiczFlor/RPi-Jukebox-RFID/master/scripts/installscripts/buster-install-default.sh; chmod +x buster-install-default.sh; ./buster-install-default.sh

#Phoniebox WebApp Dateiupload configurieren:
pi@PhonieBoxSonja:~ $ sudo nano /etc/php/7.4/cgi/php.ini
…
;;;;;;;;;;;;;;;;;
; Data Handling ;
;;;;;;;;;;;;;;;;;
…
; Maximum size of POST data that PHP will accept.
; Its value may be 0 to disable the limit. It is ignored if POST data reading
; is disabled through enable_post_data_reading.
; http://php.net/post-max-size
post_max_size = 0
…
;;;;;;;;;;;;;;;;
; File Uploads ;
;;;;;;;;;;;;;;;;

; Whether to allow HTTP file uploads.
; http://php.net/file-uploads
file_uploads = On

; Temporary directory for HTTP uploaded files (will use system default if not
; specified).
; http://php.net/upload-tmp-dir
;upload_tmp_dir =

; Maximum allowed size for uploaded files.
; http://php.net/upload-max-filesize
upload_max_filesize = 0

; Maximum number of files that can be uploaded via a single request
max_file_uploads = 200

#Phoniebox SambaServer Installieren:
pi@PhonieBoxSonja:~ $ sudo nano /etc/samba/smb.conf
[global]

Browsing/Identification

Change this to the workgroup/NT-domain name your Samba server will part of

workgroup = WORKGROUP
wins support = yes

[phoniebox]
comment=Pi Jukebox
path=/home/pi/RPi-Jukebox-RFID/shared
browseable=Yes
writeable=Yes
only guest=no
create mask=0777
directory mask=0777
public=no
veto files=/._*/.DS_Store/

#if the audiofiles are not in 'shared', we need this
[phoniebox_audiofile]
comment= Pi Jukebox
path=/home/pi/RPi-Jukebox-RFID/shared/audiofolders
browseable=Yes
writeable=Yes
only guest=no
create mask=0777
directory mask=0777
public=no
veto files=/._*/.DS_Store/

#SamabaServer Nutzer hinzufügen:
pi@PhonieBoxSonja:~ $ sudo smbpasswd -a pi
New SMB password:
Retype new SMB password:

#Festlegen der Gesamtlautstärke:
pi@PhonieBoxSonja:~ $ cd RPi-Jukebox-RFID/settings/
pi@PhonieBoxSonja:/RPi-Jukebox-RFID/settings $ sudo nano Audio_iFace_Name
Playback
pi@PhonieBoxSonja:/RPi-Jukebox-RFID/settings $ cd
pi@PhonieBoxSonja:~ $ sudo nano /etc/mpd.conf
audio_output {
type "alsa"
name "My ALSA Device"

device "hw:0,0" # optional

mixer_type "hardware" # optional

mixer_device "default" # optional

    mixer_control        "Playback"        # optional

mixer_index "0" # optional

}

[schneekluth]

I have used a wooden cigar box as base with 3 Sanwa Arcade Buttons to control media playback. On top is a adafruit rugged metal push button with integrated status led to shutdown the pi zero.

I also wrote a blog post as my own documentation: https://jbetzen.net/posts/phoniebox/

Demonstration Video

[pmdrev]

Thank you so much for this super cool project! I am not a developper myself and I was a bit worried I would have to modify some code, but in fact installation was smooth and easy. I sticked to the recommended hardware and it worked flawlessly. My kids are still very young (1.5y and 3y) so I made a very basic version, but they could not be happier :)

[svenvdmeer]

I really like this project, I had a lot of fun building this. I designed my own case for 3d printing.

[usamer77]

2nd version so far ended up to be a present... :-) Thank you for creating and maintaining this project!

[apkuki]

I call it the "Miniphonie" or "Travelphonie".
Using a Rasperry Pi Zero 2, Pisugar3 Battery Hat and the Pirate Audio Headphone Amp.
I'm not done yet: For start I will cue the music via WebApp for my son. I'm still in the search of a small enough RFID Reader and Antenna. Additionally I still need to design a flexible TPE Enclosure to 3D print, so that the MiniPhonie is save for Travel.

As a Swiss we use standard swiss army knife for pocket size comparison ;-)

[Lippsson]

Nice work @apkuki.
I ordered same components and may can help you to create a 3D case

[apkuki]

thanks @Lippsson. I discovered it "by accident" so I thought I'll give it a go - as my son loves his PhonieBox - but its just to big to travel. we had to rely on a iPad and Headphones.

For the PiSugar there are some files available: https://github.com/PiSugar/PiSugar/tree/master/model3 and also general (for lids and tops: https://github.com/PiSugar/PiSugar/tree/master/model)

I started with some basic combination of PirateAudio STLs and the PiSugar STLs above.... see attached Zip with a miniphonie.stl - but it is a first in 3D Modelling / Printing for me - so yes i would appreciate the help!
Miniphonie.zip

I'll give an update if I was able to print a first prototype case :-)

[apkuki]

@Lippsson I started a separated thread here: #1860 may make more sense to discuss there with other "Minifying Enthusiats" :-)

[jeripeierSBB]

My second Phoniebox, this time more focusing on building the case and just copy the inner part from my first project. I call it "Regenbogs" (german).

Battery indicator:

A lot to do for the router:

[tiffoknee]

[kacopi]

![Uploading IMG_20230213_145926.jpg…]


My phoniebox

[SmKlr]

Finally the Phoniebox for my 3y old son is finished!

Thanks to Stefan Rüetschli for the design inspiration. ;-)

Main components:

• Ikea Dragan box as housing
• Speedlink Twoxo speakers
• Raspberry Pi 4B 2GB
• Hifiberry Miniamp
• RC522 RFID Reader
• DFRobot EC11 Rotary Encoder Module (for Volume Control)
• Baseus Slim Powerbank 10000mAh
• Arcade Buttons (Amazon)
• USB C socket (Amazon)
• Keenso Power Button (Amazon)

Since my son already complained about the missing headphone socket, I already started to work on an upgrade. Unfortunately, I will have to kick out the Hifiberry Miniamp for that and replace it with a combination IQaudio DAC+ and MAX98306 Amplifier.

[pabera]

I like the inside, looks very clean :-)

Which Pin Board did you use to get more Pins on the Raspberry?

Since my son already complained about the missing headphone socket, I already started to work on an upgrade. Unfortunately, I will have to kick out the Hifiberry Miniamp for that and replace it with a combination IQaudio DAC+ and MAX98306 Amplifier.

Have you tried Bluetooth (only in V3)? ;-)

[AlvinSchiller]

Have you tried Bluetooth (only in V3)? ;-)

Bluetooth should also work in V2 (at least 2.4) :)

[SmKlr]

I like the inside, looks very clean :-)

Which Pin Board did you use to get more Pins on the Raspberry?

Since my son already complained about the missing headphone socket, I already started to work on an upgrade. Unfortunately, I will have to kick out the Hifiberry Miniamp for that and replace it with a combination IQaudio DAC+ and MAX98306 Amplifier.

Have you tried Bluetooth (only in V3)? ;-)

I've used this port doubler: https://www.reichelt.de/ch/de/raspberry-pi-shield-gpio-port-doubler-rpi-shd-doubler-p239006.html?r=1

I decided against Bluetooth because I think you will always have some connectivity issues and the overall UX will be better with wired headphones - at least for small children.

[s-martin]

I like the clean design very much.

Where are the RFID cards supposed to be swiped?

[SmKlr]

I like the clean design very much.

Where are the RFID cards supposed to be swiped?

On the right hand side below the volume control.

[SmKlr]

I've finished the headphone upgrade:

• Since the Hifiberry Miniamp is not compatible with headphones, I replaced it by a IQaudio DAC+. Fortunately, it has already an integrated headphone preamp. However, I'm not using the integrated headphone socket, since the Raspberry Pi is mounted in the center of the box.
• Since the IQaudio DAC+ has no integrated preamp for the speakers, I'm using a Max98306 Stereo 3.7W Class D Audio Amplifier. It can be muted by pulling the shutdown pin to GND.
• As headphone socket, I'm using the TonUINO Kopfhörerplatine. It is slightly more expensive compared to other sockets, but for me it was difficult to find something which creates a contact (to GND) when a plug is inserted (and not vice versa). I'm using that to shutdown the MAX98306 when the plug is inserted.
• The headphone signal is available on pins on the IQaudio DAC+. However, a signal is only available if you have a plug inserted into the internal/onboard headphone socket. I solved that by just plugging in an old headphone plug, which I didn't use anymore.
• The level of the headphone amp is quite high. I had to reduce the max. volume of the Phoniebox software to 40%. In order have similar loudness between headphones and external speakers, I had to increase the gain of the MAX98306. However, I did not like this solution (for example you could then hear a loud artefact when the Phoniebox was switched on). Therefore, I again reduced the gain of the MAX98306 and instead built a small resistor attenuation network for the headphone signal.

Let me know if you have any questions.