SDRAM Board Assembly (DIY)
The following section will walk you through all steps of creating your own SDRAM Board. It describes where to order all necessary parts like PCB and components. It will also give you an overview on the equipment you need and show you how to assemble the board.
Check the MiSTer hardware repository for the most recent PCB files: MiSTer_Hardware
This is a general overview of the components, including reference parts that were successfully used to assemble a MiSTer SDRAM Board.
| Name | Component | Package | Value | Reference Parts |
|---|---|---|---|---|
| C1 - C5 | Capacitor (Ceramic) | 0805 | 0.1uF | KEMET C0805C104J5RACTU |
| U1 | IC SDRAM 256MBIT 166MHZ 32MB | TSOP-54 | 32 MB | Alliance Memory AS4C16M16SA-6TCN |
| P1 | 2x20 (40 Pos.) Female Header, Double Row, Right Angle, | 2,54mm Pitch | - | No Name (AliExress) |
| P2 | 1x3 (3 Pos.) Male Pin Header, Single Row, Right Angle, Contact Length: 5.84mm (Mating), 5.84mm (Post), Insulation Height: 2.54mm |
2,54mm Pitch | - | Sullins Connector PRPC040SBBN-M71RC |
| Name | Component | Package | Value | Reference Parts |
|---|---|---|---|---|
| C1 - C5 | Capacitor (Ceramic) | 0805 | 0.1uF | KEMET C0805C104J5RACTU |
| U1 | IC SDRAM 256MBIT 166MHZ 32MB | TSOP-54 | 32 MB | Alliance Memory AS4C16M16SA-6TCN |
| P1 | 2x20 (40 Pos.) Female Header, Double Row, Isolation Height: 11mm | 2.54mm | - | No Name (AliExpress) |
| P2 | 1x3 (3 Pos.) Male Pin Header, Single Row, Straight, Contact Length: 6.1mm (Mating), 3mm (Post), Insulation Height: 2.54mm |
2.54mm | - | Sullins Connector PRPC040SAAN-RC |
User approved BOMs and One-Click shopping Carts. If you have successfully build a MiSTer IO Board and used your own components, then share them with us :)
- Octopart: SDRAM Board (3.1U, Vertical) (Missing Parts: P1)
- Octopart: SDRAM Board (3.1U, Horizontal) (Missing Parts: P1)
SDRAM Board v3.1 (by Negative Solution):
