[BUG] mks wifi does not read or print files via cura #27237
Comments
|
Config files do not match description, description says "mks robin nano" but the provided config says BOARD_MKS_EAGLE |
|
Yes, it's a MKS Eagle, both are the same board. the mks robin nano is better known... |
|
I've corrected the description. |
|
Please download |
|
ok, sorry. |
ok, i do it. |
I tried using bugfix-2.1.x but I had no success with the files. Furthermore, another problem also appeared: I have no movements in homming and the system freezes. |
|
Same problem here (mks robin nano v3) |
|
I reviewed the entire configuration using bugfix-2.1.x line by line and was unable to get Cura to read the files. Even version 2.1.2.1 worked fine. |
|
the changes from 2.1.2.2 to 2.1.2.3 are minimal.. https://github.com/MarlinFirmware/Marlin/compare/2.1.2.2..2.1.2.3 |
thisiskeithb
changed the title
|
right, it's version 2.1.2.1, I've already corrected it |
Did you test the latest
bugfix-2.1.xcode?Yes, and the problem still exists.
Bug Description
Since version 2.1.2.3 I can no longer read or start printing via cura. I'm using a mks wifi with mks Eagle. I can record via wifi through Cura but I can't read it after that. I downgraded to 2.1.2.1 and it works perfectly. I appreciate any possible help.
Bug Timeline
since 2.1.2.3
Expected behavior
Upload the files via WiFi and start printing.
Actual behavior
No response
Steps to Reproduce
No response
Version of Marlin Firmware
marlin 2.1.2.4
Printer model
home made delta
Electronics
mks Eagle mks wifi
LCD/Controller
mks ts35 lvgl
Other add-ons
No response
Bed Leveling
ABL Linear grid
Your Slicer
Cura
Host Software
Cura
Don't forget to include
Configuration.handConfiguration_adv.h.Additional information & file uploads
Marlin.zip
The text was updated successfully, but these errors were encountered: