You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
since upgrading to Marlin 2.1.2. (Digant build to work with Hemera) part cooler fan does not work correctly, when set to 255 via M106 Fan turns at full speed, on 254 fan barely turns( with strange wining noise), on 253 stops completly. tried also with spare fan.
Bug Timeline
since upgrading to 2.1.2
Expected behavior
Fan turns according to M106 value, 0 = 0, 255= max, 128 = 50% etc
Actual behavior
M106 S255 = max speed
M106 S254 = barely turns, wining noise
M106 S253 = fan stops completely
M106 >S253 = no movement
Steps to Reproduce
No response
Version of Marlin Firmware
2.1.2
Printer model
Artillery Sidewinder X1
Electronics
Stock board, but with BLW touch waggster mod & E3D Hemera
Add-ons
only above listed
Bed Leveling
ABL Bilinear mesh
Your Slicer
IdeaMaker
Host Software
OctoPrint
Don't forget to include
A ZIP file containing your Configuration.h and Configuration_adv.h.
Additional information & file uploads
No response
The text was updated successfully, but these errors were encountered:
Did you test the latest
bugfix-2.1.x
code?Yes, and the problem still exists.
Bug Description
since upgrading to Marlin 2.1.2. (Digant build to work with Hemera) part cooler fan does not work correctly, when set to 255 via M106 Fan turns at full speed, on 254 fan barely turns( with strange wining noise), on 253 stops completly. tried also with spare fan.
Bug Timeline
since upgrading to 2.1.2
Expected behavior
Fan turns according to M106 value, 0 = 0, 255= max, 128 = 50% etc
Actual behavior
M106 S255 = max speed
M106 S254 = barely turns, wining noise
M106 S253 = fan stops completely
M106 >S253 = no movement
Steps to Reproduce
No response
Version of Marlin Firmware
2.1.2
Printer model
Artillery Sidewinder X1
Electronics
Stock board, but with BLW touch waggster mod & E3D Hemera
Add-ons
only above listed
Bed Leveling
ABL Bilinear mesh
Your Slicer
IdeaMaker
Host Software
OctoPrint
Don't forget to include
Configuration.h
andConfiguration_adv.h
.Additional information & file uploads
No response
The text was updated successfully, but these errors were encountered: