[BUG] MKS NANO V3 W/TS35 V2.0 Hangs on firmware installation

[Savage79]

Did you test the latest bugfix-2.0.x code?

Yes, and the problem still exists.

Bug Description

Latest Bugfix and Latest 2.0.8 Firmware both same issue, compile no errors, install on SD card or USB stick, power on, goes through firmware installation, Hangs on 100% and does not initiate Marlin. No action fixes issue, must install older version of Bugfix Downloaded April 22/2021. and that version works.

Also same error happens regardless the UI of the screen. TFT_FULL_COLOR or TFT_LVGL

Bug Timeline

New with 2.0.8

Expected behavior

Finish installation as required

Actual behavior

Hangs at this location

Steps to Reproduce

Compile firmware, NO errors
Copy to SD Card or USB
Insert drive to board and power on
Board shows 100% and give 2 confirmation tones, and hangs.

Version of Marlin Firmware

Marlin Bugfix 2.0.X and 2.0.8 Latest (May 2,2021)

Printer model

Flsun QQS Pro

Electronics

MKS Nano V3 w/TS35 V2 and TMC2209 Uart

Add-ons

No response

Your Slicer

Prusa Slicer

Host Software

OctoPrint

Additional information & file uploads

Marlin208.zip
Marlinbugfix208.zip

[rhapsodyv]

I think I fixed it today with #21775 and #21776

[Savage79]

I will give it a go here shortly.

[Savage79]

@rhapsodyv the fix that you applied does not fix this hang issue that I have.

[rhapsodyv]

I will test with your configs. But for me, it's working fine.

[Savage79]

@rhapsodyv I downloaded a fresh copy tonight, and compiled, and perfect, the board took the new firmware.

Thank you and everyone for taking a look at this issue. Your work doesn't go un-noticed.

[rhapsodyv]

So this can be closed? :-)

[Savage79]

I would assume so :)

[github-actions]

This issue has been automatically locked since there has not been any recent activity after it was closed. Please open a new issue for related bugs.