- Copy the datapack in your world's 'datapacks' folder.
- Run
/reloador rejoin your world
You can tweak the settings of the computer with the command /function cb_computer:settings.
This will print out a list of parameters that you can modify.
| Setting | Default value | Description |
|---|---|---|
opcode_len |
6 | Length of opcode in bit. This should be the value used in the compiler script |
instruction_len |
16 | Length of instructions in bit. This should be the value used in the compiler script |
output_chat |
0 | Whether the OUT instruction prints in chat (either 0 or 1). |
debug_instructions |
0 | Whether instructions are printed in chat when executed (either 0 or 1). |
max_digits |
15 | Maximum number of digits displayed on physical displays. |
debug_warnings |
0 | Whether warnings should be printed in chat (either 0 or 1). |
speed |
1000 | Delay between each instruction execution in ms (possible values are: 50, 100, 200, 500, 1000). |
To show the output of a program, you can turn output_chat on and/or place physical displays. The former has been covered above. For the latter, run /function cb_computer:give/output to get an output display. Place it on the ground. When a value is output by a program, the digits will be placed in the positive X direction (east) like this.
To remove a display, simply destroy the armour stand.
NB: you can have multiple displays, in which case they will all show the same value
- Run
/reloador/function cb_computer:loadto reset the computer's memory. - Run the corresponding function, for example
/function cb_computer:programs/fibonacci. - Run
/function cb_computer:exec.
To stop the execution manually, run /function cb_computer:stop.