filogic: add support for ZyXEL EX5700

Lienol · Nov 1, 2024 · 8537d3e · 8537d3e
1 parent bd85b63
commit 8537d3e
Show file tree

Hide file tree

Showing 4 changed files with 406 additions and 0 deletions.
diff --git a/package/boot/uboot-envtools/files/mediatek_filogic b/package/boot/uboot-envtools/files/mediatek_filogic
@@ -58,6 +58,9 @@ xiaomi,redmi-router-ax6000)
 	ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x10000" "0x20000"
 	ubootenv_add_uci_sys_config "/dev/mtd2" "0x0" "0x10000" "0x20000"
 	;;
+zyxel,ex5700-telenor)
+	ubootenv_add_uci_config "/dev/ubootenv" "0x0" "0x4000" "0x4000" "1"
+	;;
 esac
 
 config_load ubootenv

diff --git a/target/linux/mediatek/dts/mt7986a-zyxel-ex5700-telenor.dts b/target/linux/mediatek/dts/mt7986a-zyxel-ex5700-telenor.dts
@@ -0,0 +1,376 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+
+/dts-v1/;
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+
+#include "mt7986a.dtsi"
+
+/ {
+	model = "ZyXEL EX5700 (Telenor)";
+	compatible = "zyxel,ex5700-telenor", "mediatek,mt7986a";
+
+	aliases {
+		serial0 = &uart0;
+		ethernet0 = &gmac0;
+		led-boot = &led_status_green;
+		led-failsafe = &led_status_green;
+		led-running = &led_status_green;
+		led-upgrade = &led_status_amber;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+
+		// Stock U-Boot crashes unless /chosen/bootargs exists
+		bootargs = "earlycon=uart8250,mmio32,0x11002000 console=ttyS0,115200n8";
+	};
+
+	memory {
+		reg = <0 0x40000000 0 0x40000000>;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_5v: regulator-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+
+	keys {
+		compatible = "gpio-keys";
+		poll-interval = <20>;
+
+		reset-button {
+			label = "reset";
+			gpios = <&pio 9 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+		};
+
+		wps-button {
+			label = "wps";
+			gpios = <&pio 10 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_WPS_BUTTON>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		red1 {
+			label = "red:net";
+			gpios = <&pio 23 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		green1 {
+			label = "green:net";
+			gpios = <&pio 25 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		amber1 {
+			label = "amber:net";
+			gpios = <&pio 29 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		white2 {
+			label = "white:status";
+			gpios = <&pio 16 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		red2 {
+			label = "red:status";
+			gpios = <&pio 17 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led_status_green: green2 {
+			label = "green:status";
+			gpios = <&pio 31 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led_status_amber: amber2 {
+			label = "amber:status";
+			gpios = <&pio 18 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+	};
+
+};
+
+&eth {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&eth_pins>;
+
+	gmac0: mac@0 {
+		compatible = "mediatek,eth-mac";
+		reg = <0>;
+		phy-mode = "2500base-x";
+
+		fixed-link {
+			speed = <2500>;
+			full-duplex;
+			pause;
+		};
+	};
+
+	mac@1 {
+		compatible = "mediatek,eth-mac";
+		reg = <1>;
+		label = "wan";
+		phy-mode = "2500base-x";
+		phy-handle = <&phy6>;
+	};
+
+	mdio: mdio-bus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+};
+
+&mdio {
+	reset-gpios = <&pio 6 GPIO_ACTIVE_LOW>;
+	reset-delay-us = <50000>;
+	reset-post-delay-us = <20000>;
+
+	phy5: phy@5 {
+		compatible = "ethernet-phy-ieee802.3-c45";
+		reg = <5>;
+		mxl,led-config = <0x3f0 0x330 0x0 0x0>;
+	};
+
+	phy6: phy@6 {
+		compatible = "ethernet-phy-ieee802.3-c45";
+		reg = <6>;
+		mxl,led-config = <0x3f0 0x330 0x0 0x0>;
+	};
+
+	switch: switch@1f {
+		compatible = "mediatek,mt7531";
+		reg = <31>;
+		reset-gpios = <&pio 5 GPIO_ACTIVE_HIGH>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		interrupt-parent = <&pio>;
+		interrupts = <66 IRQ_TYPE_LEVEL_HIGH>;
+	};
+};
+
+&switch {
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+			label = "lan3";
+		};
+
+		port@1 {
+			reg = <1>;
+			label = "lan2";
+		};
+
+		port@2 {
+			reg = <2>;
+			label = "lan1";
+		};
+
+		port@5 {
+			reg = <5>;
+			label = "lan4";
+			phy-mode = "2500base-x";
+			phy-handle = <&phy5>;
+		};
+
+		port@6 {
+			reg = <6>;
+			ethernet = <&gmac0>;
+			phy-mode = "2500base-x";
+
+			fixed-link {
+				speed = <2500>;
+				full-duplex;
+				pause;
+			};
+		};
+	};
+};
+
+&crypto {
+	status = "okay";
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie_pins>;
+	status = "okay";
+
+	pcie@0,0 {
+		reg = <0x0000 0 0 0 0>;
+
+		wifi@0,0 {
+			compatible = "mediatek,mt76";
+			reg = <0x0000 0 0 0 0>;
+			mediatek,mtd-eeprom = <&factory 0xa0000>;
+		};
+	};
+};
+
+&pcie_phy {
+	status = "okay";
+};
+
+&watchdog {
+	status = "okay";
+};
+
+&wifi {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&wf_5g_pins>;
+
+	mediatek,mtd-eeprom = <&factory 0x0>;
+};
+
+&pio {
+	eth_pins: eth-pins {
+		mux {
+			function = "eth";
+			groups = "switch_int", "mdc_mdio";
+		};
+	};
+
+	pcie_pins: pcie-pins {
+		mux {
+			function = "pcie";
+			groups = "pcie_pereset"; // "pcie_clk" and "pcie_wake" is unused?
+		};
+	};
+
+	spi_flash_pins: spi-flash-pins-33-to-38 {
+		mux {
+			function = "spi";
+			groups = "spi0", "spi0_wp_hold";
+		};
+		conf-pu {
+			pins = "SPI2_CS", "SPI2_HOLD", "SPI2_WP";
+			drive-strength = <8>;
+			mediatek,pull-up-adv = <0>; /* bias-disable */
+		};
+		conf-pd {
+			pins = "SPI2_CLK", "SPI2_MOSI", "SPI2_MISO";
+			drive-strength = <8>;
+			mediatek,pull-down-adv = <0>; /* bias-disable */
+		};
+	};
+
+	wf_5g_pins: wf_5g-pins {
+		mux {
+			function = "wifi";
+			groups = "wf_5g";
+		};
+		conf {
+			pins = "WF1_HB1", "WF1_HB2", "WF1_HB3", "WF1_HB4",
+			       "WF1_HB0", "WF1_HB5", "WF1_HB6", "WF1_HB7",
+			       "WF1_HB8", "WF1_TOP_CLK", "WF1_TOP_DATA";
+			drive-strength = <4>;
+		};
+	};
+
+};
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi_flash_pins>;
+	cs-gpios = <0>, <0>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <20000000>;
+	};
+
+	flash@1 {
+		compatible = "spi-nand";
+		reg = <1>;
+
+		mediatek,nmbm;
+		mediatek,bmt-max-ratio = <1>;
+		mediatek,bmt-max-reserved-blocks = <64>;
+
+		spi-max-frequency = <20000000>;
+		spi-tx-buswidth = <4>;
+		spi-rx-buswidth = <4>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "BL2";
+				reg = <0x000000 0x100000>;
+				read-only;
+			};
+			partition@100000 {
+				label = "u-boot-env";
+				reg = <0x100000 0x80000>;
+			};
+			factory: partition@180000 {
+				label = "Factory";
+				reg = <0x180000 0x200000>;
+				read-only;
+
+				compatible = "nvmem-cells";
+				#address-cells = <1>;
+				#size-cells = <1>;
+			};
+			partition@380000 {
+				label = "FIP";
+				reg = <0x380000 0x200000>;
+				read-only;
+			};
+			partition@580000 {
+				label = "ubi";
+				reg = <0x580000 0x1da80000>;
+			};
+		};
+	};
+};
+
+&ssusb {
+	vusb33-supply = <&reg_3p3v>;
+	vbus-supply = <&reg_5v>;
+	status = "okay";
+};
+
+&trng {
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&usb_phy {
+	status = "okay";
+};
diff --git a/target/linux/mediatek/filogic/base-files/etc/init.d/bootcount b/target/linux/mediatek/filogic/base-files/etc/init.d/bootcount
@@ -0,0 +1,12 @@
+#!/bin/sh /etc/rc.common
+# SPDX-License-Identifier: GPL-2.0-only
+
+START=99
+
+boot() {
+	case $(board_name) in
+	zyxel,ex5700-telenor)
+		fw_setenv uboot_bootcount 0
+		;;
+	esac
+}