ADEO LDSENK02S - ENKI LEXMAN 16A EU smart plug - Errors configuring

[IgnacioHR]

What happened?

This is a Zigbee On/Off switch.

Log is filled with errors like this:

Failed to configure 'On/Off Zona Impresora 3D', 
attempt 1 (Error: Read 0x4c5bb3fffe74aec6/1 
haElectricalMeasurement(["acCurrentDivisor","acCurrentMultiplier"], {
"timeout":10000,"disableResponse":false,"disableRecovery":false,
"disableDefaultResponse":true,"direction":0,"srcEndpoint":null,
"reservedBits":0,"manufacturerCode":null,
"transactionSequenceNumber":null,"writeUndiv":false
}) 
failed 
(Status 'UNSUPPORTED_ATTRIBUTE') at Endpoint.checkStatus 
(/opt/zigbee2mqtt/node_modules/zigbee-herdsman/src/controller/model/endpoint.ts:319:28) at Endpoint.read
 (/opt/zigbee2mqtt/node_modules/zigbee-herdsman/src/controller/model/endpoint.ts:469:22) at configure
 (/opt/zigbee2mqtt/node_modules/zigbee-herdsman-converters/src/lib/modernExtend.ts:222:25) at Object.configure
 (/opt/zigbee2mqtt/node_modules/zigbee-herdsman-converters/src/index.ts:141:25) at Configure.configure
 (/opt/zigbee2mqtt/lib/extension/configure.ts:122:13) at Immediate.<anonymous>
 (/opt/zigbee2mqtt/lib/extension/configure.ts:74:17))

Additional information:

zigbee_herdsman_converters_version 18.42.0
zigbee_herdsman_version 0.35.1

If I remember correctly this was working on version 1.33.2 and started to fail on version 1.34.0

What did you expect to happen?

The device is properly configured and no errors are raised

How to reproduce it (minimal and precise)

Always.

Zigbee2MQTT version

1.36.0

Adapter firmware version

7.3.2.0 build 212

Adapter

EZSP v12

Setup

Standalone virtual machine inside proxmox

Debug log

No response

[chiva]

More in-depth analysis is being done here: Koenkk/zigbee-herdsman-converters#7147
We can close this one to avoid doubling efforts 👍