wrong install code length

[skrebber]

What happened?

trying to pair a Bosch TwinGuard smoke detector, as a Zigbee 3.0 device it needs an install code. The QR code of from device is:
RB01SG0D836591B3CC0010000000000000000000000D6F0018869DDBDLK82AF21EF5510E04E0459F250813F9562

z2m says, wrong install code length.

Interesting:
I first used 1.29.2 bbbaaf4 with the same experience. Then updated to 15.0.39 ea0a999 with the same negative result. But @safakaltun tested my install code in his envoirment (80c464c) with success. see: #14355 (comment)

What did you expect to happen?

successful paring of the Zigbee 3.0 device.

How to reproduce it (minimal and precise)

press -Settings-Tools-Add install code paste code from above an click ok.

Zigbee2MQTT version

1.30.0-dev commit: ea0a999 15.0.39

Adapter firmware version

7.1.1.0 build 273

Adapter

Home Assistant SkyConnect

Debug log

Debug 2023-02-02 10:34:57Received MQTT message on 'zigbee2mqtt/bridge/request/install_code/add' with data '{"transaction":"7m2tf-1","value":"RB01SG0D836591B3CC0010000000000000000000000D6F0018869DDBDLK82AF21EF5510E04E0459F250813F9562"}'
Error 2023-02-02 10:34:57Request 'zigbee2mqtt/bridge/request/install_code/add' failed with error: 'Wrong install code length'
Debug 2023-02-02 10:34:58Error: Wrong install code length at EZSPAdapter.addInstallCode (/app/node_modules/zigbee-herdsman/src/adapter/ezsp/adapter/ezspAdapter.ts:260:19) at Controller.addInstallCode (/app/node_modules/zigbee-herdsman/src/controller/controller.ts:230:28) at Zigbee.addInstallCode (/app/lib/zigbee.ts:314:29) at Bridge.installCodeAdd (/app/lib/extension/bridge.ts:229:27) at Bridge.onMQTTMessage (/app/lib/extension/bridge.ts:122:63) at EventEmitter.emit (node:events:525:35) at EventBus.emitMQTTMessage (/app/lib/eventBus.ts:109:22) at MQTT.onMessage (/app/lib/mqtt.ts:140:27) at WebSocket.<anonymous> (/app/lib/extension/frontend.ts:121:27) at WebSocket.emit (node:events:513:28)
Info 2023-02-02 10:34:58MQTT publish: topic 'zigbee2mqtt/bridge/response/install_code/add', payload '{"data":{},"error":"Wrong install code length","status":"error","transaction":"7m2tf-1"}'

[dan3o3]

Experiencing the exact same problem with a Bosch Twinguard. Also a fillup with 4 zeros before "DLK" let Z2M accept the code but it will not work as the device will not pair. I successfully paired a Motion Controller (Bosch) and a Plug 2 successfully, so it seems to be something special with these Twinguard codes. I am using a tubeszb.efr32_mgm210_poe_2022 as coordinator.

[github-actions]

This issue is stale because it has been open 30 days with no activity. Remove stale label or comment or this will be closed in 7 days

[l154]

Hi I have exactly the same error when I'm trying connect to Bosh Smart Home Twinguard.
2023-03-16 09:55:10Received MQTT message on 'zigbee2mqtt/bridge/request/install_code/add' with data '{"transaction":"kge09-1","value":"RB01SG0D836591B3CC0010000000000000000000000D6F0017E1B786DLK0CEC411FCB2F415FB95ED8E4C9C4F316"}' Error 2023-03-16 09:55:10Request 'zigbee2mqtt/bridge/request/install_code/add' failed with error: 'Wrong install code length' Debug 2023-03-16 09:55:10Error: Wrong install code length at EZSPAdapter.addInstallCode (/app/node_modules/zigbee-herdsman/src/adapter/ezsp/adapter/ezspAdapter.ts:260:19) at Controller.addInstallCode (/app/node_modules/zigbee-herdsman/src/controller/controller.ts:230:28) at Zigbee.addInstallCode (/app/lib/zigbee.ts:314:29) at Bridge.installCodeAdd (/app/lib/extension/bridge.ts:229:27) at Bridge.onMQTTMessage (/app/lib/extension/bridge.ts:122:63) at EventEmitter.emit (node:events:525:35) at EventBus.emitMQTTMessage (/app/lib/eventBus.ts:109:22) at MQTT.onMessage (/app/lib/mqtt.ts:140:27) at WebSocket.<anonymous> (/app/lib/extension/frontend.ts:121:27) at WebSocket.emit (node:events:513:28) Info 2023-03-16 09:55:10MQTT publish: topic 'zigbee2mqtt/bridge/response/install_code/add', payload '{"data":{},"error":"Wrong install code length","status":"error","transaction":"kge09-1"}'

[Swisyn]

I also have the same issue, even though the pairing code length on QR is 91 - I still get wrong code length alert.

What could be the main reason of this issue?

RB01SG0D836591B3CC0010000000000000000000000D6F0018860CDCDLKE8F6BCB11962F4377573AEB18480CF7E

[OnkelMikke]

hi cross cheked with me devices.
first smart plug II
QR: RB01SG0D83101826480030000000000000000000003C84FFFEEDBE4CDLK5D52BEA89C2E0758FD2FEBE1FE3932C2289F
IEEE: 00:3C:84:FF:FE:ED:BE:4C
Install-Code: 5D52-BEA8-9C2E-0758-FD2F-EBE1-FE39-32C2-289F (printed at label, match with qr and works)

Looks like, IEEE is bevor DLK and after DLK Install Code.

checked Twinguard QR, looks the same.
RB01SG0D836591B3CC0010000000000000000000000D6F000F4F53B8DLK2E96368640299BAB76865A0893E1F735
IEEE: 00:0D:6F:00:0F:4F:53:88 (printed at back label)
Thatsway i think my install code should be
2E96-3686-4029-9BAB-7686-5A08-93E1-F735

Not checked yet. I test it and comment later, again.

Not working. Too short. Sorry

[github-actions]

This issue is stale because it has been open 30 days with no activity. Remove stale label or comment or this will be closed in 7 days

[NicolaiSoeborg]

In release 1.32.1 the length issue has been fixed, but I still have some issues with the next ("interview") step during pairing, just a FYI.

[4s1]

Did you get it to work @NicolaiSoeborg?

I'd guess by comments on #14355 this could be an coordinator problem?
Looks like it works with CC2652R coordinators. But I'm not able to pair on my HA yellow (ezsp).