Indicator lights always solid on right half

[davidsgrogan]

The right indicator lights are always on when the backlight is on. Even powering off left half doesn't make the right indicator lights flash red.

This started a few days ago when I was trying to check the battery levels. I was on firmware V2. Today I installed V3, still had the problem, so installed settings-reset-v3.0.uf2 to both halves. The right indicator lights came on and stayed on even before installing V3 back. I've since installed V3 and the lights remain on.

Mod+③+④ makes the right half's backlight flash, but the LEDs come right back on.¹

How do I get those LEDs to work again?

Footnotes

1. That suggestion is from https://www.reddit.com/r/kinesisadvantage/comments/xl4adf/360_pro_stuck_with_3_green_leds_solid/ which hints that there used to be an entry for this problem on the troubleshooting page? ↩

[ReFil]

Hi, it seems like the indicator lights have gotten stuck in the battery indication mode. A fix for this behaviour has just been incorporated into the beta branch, would you be able to test that and provide feedback please?

[ReFil]

To test with the beta branch you can follow the instructions here: https://github.com/KinesisCorporation/Adv360-Pro-ZMK#beta-testing

[ReFil]

Hi, just following up on this, have you been able to get it back to normal?

[ReFil]

Hi, just following up again, if we don't hear back from you in 48 hours we'll close this issue out as sooved

[davidsgrogan]

Yes, beta worked, thanks. How will I know when the fix has been included in the stable branch and I should remove -beta from west.yml?

[ReFil]

I will update this issue when it's done, it should happen within the next few days, there's onlyy one outstanding change that must be made before it's included

[ReFil]

The changes are integrated into the stable branch, you can revert to adv360-z3.2-2