+ * Fade me in out
+ *
+ *
+ *
+ * ```
+ *
+ * Notice the CSS class **fade**? We can now create the CSS transition code that references this class:
+ *
+ * ```css
+ * /* The starting CSS styles for the enter animation */
+ * .fade.ng-enter {
+ * transition:0.5s linear all;
+ * opacity:0;
+ * }
+ *
+ * /* The finishing CSS styles for the enter animation */
+ * .fade.ng-enter.ng-enter-active {
+ * opacity:1;
+ * }
+ * ```
+ *
+ * The key thing to remember here is that, depending on the animation event (which each of the directives above trigger depending on what's going on) two
+ * generated CSS classes will be applied to the element; in the example above we have `.ng-enter` and `.ng-enter-active`. For CSS transitions, the transition
+ * code **must** be defined within the starting CSS class (in this case `.ng-enter`). The destination class is what the transition will animate towards.
+ *
+ * If for example we wanted to create animations for `leave` and `move` (ngRepeat triggers move) then we can do so using the same CSS naming conventions:
+ *
+ * ```css
+ * /* now the element will fade out before it is removed from the DOM */
+ * .fade.ng-leave {
+ * transition:0.5s linear all;
+ * opacity:1;
+ * }
+ * .fade.ng-leave.ng-leave-active {
+ * opacity:0;
+ * }
+ * ```
+ *
+ * We can also make use of **CSS Keyframes** by referencing the keyframe animation within the starting CSS class:
+ *
+ * ```css
+ * /* there is no need to define anything inside of the destination
+ * CSS class since the keyframe will take charge of the animation */
+ * .fade.ng-leave {
+ * animation: my_fade_animation 0.5s linear;
+ * -webkit-animation: my_fade_animation 0.5s linear;
+ * }
+ *
+ * @keyframes my_fade_animation {
+ * from { opacity:1; }
+ * to { opacity:0; }
+ * }
+ *
+ * @-webkit-keyframes my_fade_animation {
+ * from { opacity:1; }
+ * to { opacity:0; }
+ * }
+ * ```
+ *
+ * Feel free also mix transitions and keyframes together as well as any other CSS classes on the same element.
+ *
+ * ### CSS Class-based Animations
+ *
+ * Class-based animations (animations that are triggered via `ngClass`, `ngShow`, `ngHide` and some other directives) have a slightly different
+ * naming convention. Class-based animations are basic enough that a standard transition or keyframe can be referenced on the class being added
+ * and removed.
+ *
+ * For example if we wanted to do a CSS animation for `ngHide` then we place an animation on the `.ng-hide` CSS class:
+ *
+ * ```html
+ *
+ * Show and hide me
+ *
+ *
+ *
+ *
+ * ```
+ *
+ * All that is going on here with ngShow/ngHide behind the scenes is the `.ng-hide` class is added/removed (when the hidden state is valid). Since
+ * ngShow and ngHide are animation aware then we can match up a transition and ngAnimate handles the rest.
+ *
+ * In addition the addition and removal of the CSS class, ngAnimate also provides two helper methods that we can use to further decorate the animation
+ * with CSS styles.
+ *
+ * ```html
+ *
+ * Highlight this box
+ *
+ *
+ *
+ *
+ * ```
+ *
+ * We can also make use of CSS keyframes by placing them within the CSS classes.
+ *
+ *
+ * ### CSS Staggering Animations
+ * A Staggering animation is a collection of animations that are issued with a slight delay in between each successive operation resulting in a
+ * curtain-like effect. The ngAnimate module (versions >=1.2) supports staggering animations and the stagger effect can be
+ * performed by creating a **ng-EVENT-stagger** CSS class and attaching that class to the base CSS class used for
+ * the animation. The style property expected within the stagger class can either be a **transition-delay** or an
+ * **animation-delay** property (or both if your animation contains both transitions and keyframe animations).
+ *
+ * ```css
+ * .my-animation.ng-enter {
+ * /* standard transition code */
+ * transition: 1s linear all;
+ * opacity:0;
+ * }
+ * .my-animation.ng-enter-stagger {
+ * /* this will have a 100ms delay between each successive leave animation */
+ * transition-delay: 0.1s;
+ *
+ * /* in case the stagger doesn't work then the duration value
+ * must be set to 0 to avoid an accidental CSS inheritance */
+ * transition-duration: 0s;
+ * }
+ * .my-animation.ng-enter.ng-enter-active {
+ * /* standard transition styles */
+ * opacity:1;
+ * }
+ * ```
+ *
+ * Staggering animations work by default in ngRepeat (so long as the CSS class is defined). Outside of ngRepeat, to use staggering animations
+ * on your own, they can be triggered by firing multiple calls to the same event on $animate. However, the restrictions surrounding this
+ * are that each of the elements must have the same CSS className value as well as the same parent element. A stagger operation
+ * will also be reset if one or more animation frames have passed since the multiple calls to `$animate` were fired.
+ *
+ * The following code will issue the **ng-leave-stagger** event on the element provided:
+ *
+ * ```js
+ * var kids = parent.children();
+ *
+ * $animate.leave(kids[0]); //stagger index=0
+ * $animate.leave(kids[1]); //stagger index=1
+ * $animate.leave(kids[2]); //stagger index=2
+ * $animate.leave(kids[3]); //stagger index=3
+ * $animate.leave(kids[4]); //stagger index=4
+ *
+ * window.requestAnimationFrame(function() {
+ * //stagger has reset itself
+ * $animate.leave(kids[5]); //stagger index=0
+ * $animate.leave(kids[6]); //stagger index=1
+ *
+ * $scope.$digest();
+ * });
+ * ```
+ *
+ * Stagger animations are currently only supported within CSS-defined animations.
+ *
+ * ### The `ng-animate` CSS class
+ *
+ * When ngAnimate is animating an element it will apply the `ng-animate` CSS class to the element for the duration of the animation.
+ * This is a temporary CSS class and it will be removed once the animation is over (for both JavaScript and CSS-based animations).
+ *
+ * Therefore, animations can be applied to an element using this temporary class directly via CSS.
+ *
+ * ```css
+ * .zipper.ng-animate {
+ * transition:0.5s linear all;
+ * }
+ * .zipper.ng-enter {
+ * opacity:0;
+ * }
+ * .zipper.ng-enter.ng-enter-active {
+ * opacity:1;
+ * }
+ * .zipper.ng-leave {
+ * opacity:1;
+ * }
+ * .zipper.ng-leave.ng-leave-active {
+ * opacity:0;
+ * }
+ * ```
+ *
+ * (Note that the `ng-animate` CSS class is reserved and it cannot be applied on an element directly since ngAnimate will always remove
+ * the CSS class once an animation has completed.)
+ *
+ *
+ * ## JavaScript-based Animations
+ *
+ * ngAnimate also allows for animations to be consumed by JavaScript code. The approach is similar to CSS-based animations (where there is a shared
+ * CSS class that is referenced in our HTML code) but in addition we need to register the JavaScript animation on the module. By making use of the
+ * `module.animation()` module function we can register the ainmation.
+ *
+ * Let's see an example of a enter/leave animation using `ngRepeat`:
+ *
+ * ```html
+ *
+ * ```
+ *
+ * See the **slide** CSS class? Let's use that class to define an animation that we'll structure in our module code by using `module.animation`:
+ *
+ * ```js
+ * myModule.animation('.slide', [function() {
+ * return {
+ * // make note that other events (like addClass/removeClass)
+ * // have different function input parameters
+ * enter: function(element, doneFn) {
+ * jQuery(element).fadeIn(1000, doneFn);
+ *
+ * // remember to call doneFn so that angular
+ * // knows that the animation has concluded
+ * },
+ *
+ * move: function(element, doneFn) {
+ * jQuery(element).fadeIn(1000, doneFn);
+ * },
+ *
+ * leave: function(element, doneFn) {
+ * jQuery(element).fadeOut(1000, doneFn);
+ * }
+ * }
+ * }]
+ * ```
+ *
+ * The nice thing about JS-based animations is that we can inject other services and make use of advanced animation libraries such as
+ * greensock.js and velocity.js.
+ *
+ * If our animation code class-based (meaning that something like `ngClass`, `ngHide` and `ngShow` triggers it) then we can still define
+ * our animations inside of the same registered animation, however, the function input arguments are a bit different:
+ *
+ * ```html
+ *
+ * this box is moody
+ *
+ *
+ *
+ *
+ * ```
+ *
+ * ```js
+ * myModule.animation('.colorful', [function() {
+ * return {
+ * addClass: function(element, className, doneFn) {
+ * // do some cool animation and call the doneFn
+ * },
+ * removeClass: function(element, className, doneFn) {
+ * // do some cool animation and call the doneFn
+ * },
+ * setClass: function(element, addedClass, removedClass, doneFn) {
+ * // do some cool animation and call the doneFn
+ * }
+ * }
+ * }]
+ * ```
+ *
+ * ## CSS + JS Animations Together
+ *
+ * AngularJS 1.4 and higher has taken steps to make the amalgamation of CSS and JS animations more flexible. However, unlike earlier versions of Angular,
+ * defining CSS and JS animations to work off of the same CSS class will not work anymore. Therefore the example below will only result in **JS animations taking
+ * charge of the animation**:
+ *
+ * ```html
+ *
+ * ```
+ *
+ * ```js
+ * myModule.animation('.slide', [function() {
+ * return {
+ * enter: function(element, doneFn) {
+ * jQuery(element).slideIn(1000, doneFn);
+ * }
+ * }
+ * }]
+ * ```
+ *
+ * ```css
+ * .slide.ng-enter {
+ * transition:0.5s linear all;
+ * transform:translateY(-100px);
+ * }
+ * .slide.ng-enter.ng-enter-active {
+ * transform:translateY(0);
+ * }
+ * ```
+ *
+ * Does this mean that CSS and JS animations cannot be used together? Do JS-based animations always have higher priority? We can make up for the
+ * lack of CSS animations by using the `$animateCss` service to trigger our own tweaked-out, CSS-based animations directly from
+ * our own JS-based animation code:
+ *
+ * ```js
+ * myModule.animation('.slide', ['$animateCss', function($animateCss) {
+ * return {
+ * enter: function(element, doneFn) {
+* // this will trigger `.slide.ng-enter` and `.slide.ng-enter-active`.
+ * var runner = $animateCss(element, {
+ * event: 'enter',
+ * structural: true
+ * }).start();
+* runner.done(doneFn);
+ * }
+ * }
+ * }]
+ * ```
+ *
+ * The nice thing here is that we can save bandwidth by sticking to our CSS-based animation code and we don't need to rely on a 3rd-party animation framework.
+ *
+ * The `$animateCss` service is very powerful since we can feed in all kinds of extra properties that will be evaluated and fed into a CSS transition or
+ * keyframe animation. For example if we wanted to animate the height of an element while adding and removing classes then we can do so by providing that
+ * data into `$animateCss` directly:
+ *
+ * ```js
+ * myModule.animation('.slide', ['$animateCss', function($animateCss) {
+ * return {
+ * enter: function(element, doneFn) {
+ * var runner = $animateCss(element, {
+ * event: 'enter',
+ * addClass: 'maroon-setting',
+ * from: { height:0 },
+ * to: { height: 200 }
+ * }).start();
+ *
+ * runner.done(doneFn);
+ * }
+ * }
+ * }]
+ * ```
+ *
+ * Now we can fill in the rest via our transition CSS code:
+ *
+ * ```css
+ * /* the transition tells ngAnimate to make the animation happen */
+ * .slide.ng-enter { transition:0.5s linear all; }
+ *
+ * /* this extra CSS class will be absorbed into the transition
+ * since the $animateCss code is adding the class */
+ * .maroon-setting { background:red; }
+ * ```
+ *
+ * And `$animateCss` will figure out the rest. Just make sure to have the `done()` callback fire the `doneFn` function to signal when the animation is over.
+ *
+ * To learn more about what's possible be sure to visit the {@link ngAnimate.$animateCss $animateCss service}.
+ *
+ * ## Animation Anchoring (via `ng-animate-ref`)
+ *
+ * ngAnimate in AngularJS 1.4 comes packed with the ability to cross-animate elements between
+ * structural areas of an application (like views) by pairing up elements using an attribute
+ * called `ng-animate-ref`.
+ *
+ * Let's say for example we have two views that are managed by `ng-view` and we want to show
+ * that there is a relationship between two components situated in within these views. By using the
+ * `ng-animate-ref` attribute we can identify that the two components are paired together and we
+ * can then attach an animation, which is triggered when the view changes.
+ *
+ * Say for example we have the following template code:
+ *
+ * ```html
+ *
+ *
+ *
+ *
+ *
+ *
+ * 
+ *
+ *
+ *
+ *
+ * ```
+ *
+ * Now, when the view changes (once the link is clicked), ngAnimate will examine the
+ * HTML contents to see if there is a match reference between any components in the view
+ * that is leaving and the view that is entering. It will scan both the view which is being
+ * removed (leave) and inserted (enter) to see if there are any paired DOM elements that
+ * contain a matching ref value.
+ *
+ * The two images match since they share the same ref value. ngAnimate will now create a
+ * transport element (which is a clone of the first image element) and it will then attempt
+ * to animate to the position of the second image element in the next view. For the animation to
+ * work a special CSS class called `ng-anchor` will be added to the transported element.
+ *
+ * We can now attach a transition onto the `.banner.ng-anchor` CSS class and then
+ * ngAnimate will handle the entire transition for us as well as the addition and removal of
+ * any changes of CSS classes between the elements:
+ *
+ * ```css
+ * .banner.ng-anchor {
+ * /* this animation will last for 1 second since there are
+ * two phases to the animation (an `in` and an `out` phase) */
+ * transition:0.5s linear all;
+ * }
+ * ```
+ *
+ * We also **must** include animations for the views that are being entered and removed
+ * (otherwise anchoring wouldn't be possible since the new view would be inserted right away).
+ *
+ * ```css
+ * .view-animation.ng-enter, .view-animation.ng-leave {
+ * transition:0.5s linear all;
+ * position:fixed;
+ * left:0;
+ * top:0;
+ * width:100%;
+ * }
+ * .view-animation.ng-enter {
+ * transform:translateX(100%);
+ * }
+ * .view-animation.ng-leave,
+ * .view-animation.ng-enter.ng-enter-active {
+ * transform:translateX(0%);
+ * }
+ * .view-animation.ng-leave.ng-leave-active {
+ * transform:translateX(-100%);
+ * }
+ * ```
+ *
+ * Now we can jump back to the anchor animation. When the animation happens, there are two stages that occur:
+ * an `out` and an `in` stage. The `out` stage happens first and that is when the element is animated away
+ * from its origin. Once that animation is over then the `in` stage occurs which animates the
+ * element to its destination. The reason why there are two animations is to give enough time
+ * for the enter animation on the new element to be ready.
+ *
+ * The example above sets up a transition for both the in and out phases, but we can also target the out or
+ * in phases directly via `ng-anchor-out` and `ng-anchor-in`.
+ *
+ * ```css
+ * .banner.ng-anchor-out {
+ * transition: 0.5s linear all;
+ *
+ * /* the scale will be applied during the out animation,
+ * but will be animated away when the in animation runs */
+ * transform: scale(1.2);
+ * }
+ *
+ * .banner.ng-anchor-in {
+ * transition: 1s linear all;
+ * }
+ * ```
+ *
+ *
+ *
+ *
+ * ### Anchoring Demo
+ *
+ +
+
+
+ Welcome to the home page +
Please click on an element
+ + {{ record.title }} + +
+ {{ profile.title }}
+
+ | Request expectations | Backend definitions | |
|---|---|---|
| Syntax | + *.expect(...).respond(...) | + *.when(...).respond(...) | + *
| Typical usage | + *strict unit tests | + *loose (black-box) unit testing | + *
| Fulfills multiple requests | + *NO | + *YES | + *
| Order of requests matters | + *YES | + *NO | + *
| Request required | + *YES | + *NO | + *
| Response required | + *optional (see below) | + *YES | + *
+ * *NOTE*: This function is declared ONLY WHEN running tests with jasmine or mocha + * + * This function registers a module configuration code. It collects the configuration information + * which will be used when the injector is created by {@link angular.mock.inject inject}. + * + * See {@link angular.mock.inject inject} for usage example + * + * @param {...(string|Function|Object)} fns any number of modules which are represented as string + * aliases or as anonymous module initialization functions. The modules are used to + * configure the injector. The 'ng' and 'ngMock' modules are automatically loaded. If an + * object literal is passed they will be registered as values in the module, the key being + * the module name and the value being what is returned. + */ + window.module = angular.mock.module = function() { + var moduleFns = Array.prototype.slice.call(arguments, 0); + return isSpecRunning() ? workFn() : workFn; + ///////////////////// + function workFn() { + if (currentSpec.$injector) { + throw new Error('Injector already created, can not register a module!'); + } else { + var modules = currentSpec.$modules || (currentSpec.$modules = []); + angular.forEach(moduleFns, function(module) { + if (angular.isObject(module) && !angular.isArray(module)) { + modules.push(function($provide) { + angular.forEach(module, function(value, key) { + $provide.value(key, value); + }); + }); + } else { + modules.push(module); + } + }); + } + } + }; + + /** + * @ngdoc function + * @name angular.mock.inject + * @description + * + * *NOTE*: This function is also published on window for easy access.
+ * *NOTE*: This function is declared ONLY WHEN running tests with jasmine or mocha + * + * The inject function wraps a function into an injectable function. The inject() creates new + * instance of {@link auto.$injector $injector} per test, which is then used for + * resolving references. + * + * + * ## Resolving References (Underscore Wrapping) + * Often, we would like to inject a reference once, in a `beforeEach()` block and reuse this + * in multiple `it()` clauses. To be able to do this we must assign the reference to a variable + * that is declared in the scope of the `describe()` block. Since we would, most likely, want + * the variable to have the same name of the reference we have a problem, since the parameter + * to the `inject()` function would hide the outer variable. + * + * To help with this, the injected parameters can, optionally, be enclosed with underscores. + * These are ignored by the injector when the reference name is resolved. + * + * For example, the parameter `_myService_` would be resolved as the reference `myService`. + * Since it is available in the function body as _myService_, we can then assign it to a variable + * defined in an outer scope. + * + * ``` + * // Defined out reference variable outside + * var myService; + * + * // Wrap the parameter in underscores + * beforeEach( inject( function(_myService_){ + * myService = _myService_; + * })); + * + * // Use myService in a series of tests. + * it('makes use of myService', function() { + * myService.doStuff(); + * }); + * + * ``` + * + * See also {@link angular.mock.module angular.mock.module} + * + * ## Example + * Example of what a typical jasmine tests looks like with the inject method. + * ```js + * + * angular.module('myApplicationModule', []) + * .value('mode', 'app') + * .value('version', 'v1.0.1'); + * + * + * describe('MyApp', function() { + * + * // You need to load modules that you want to test, + * // it loads only the "ng" module by default. + * beforeEach(module('myApplicationModule')); + * + * + * // inject() is used to inject arguments of all given functions + * it('should provide a version', inject(function(mode, version) { + * expect(version).toEqual('v1.0.1'); + * expect(mode).toEqual('app'); + * })); + * + * + * // The inject and module method can also be used inside of the it or beforeEach + * it('should override a version and test the new version is injected', function() { + * // module() takes functions or strings (module aliases) + * module(function($provide) { + * $provide.value('version', 'overridden'); // override version here + * }); + * + * inject(function(version) { + * expect(version).toEqual('overridden'); + * }); + * }); + * }); + * + * ``` + * + * @param {...Function} fns any number of functions which will be injected using the injector. + */ + + + + var ErrorAddingDeclarationLocationStack = function(e, errorForStack) { + this.message = e.message; + this.name = e.name; + if (e.line) this.line = e.line; + if (e.sourceId) this.sourceId = e.sourceId; + if (e.stack && errorForStack) + this.stack = e.stack + '\n' + errorForStack.stack; + if (e.stackArray) this.stackArray = e.stackArray; + }; + ErrorAddingDeclarationLocationStack.prototype.toString = Error.prototype.toString; + + window.inject = angular.mock.inject = function() { + var blockFns = Array.prototype.slice.call(arguments, 0); + var errorForStack = new Error('Declaration Location'); + return isSpecRunning() ? workFn.call(currentSpec) : workFn; + ///////////////////// + function workFn() { + var modules = currentSpec.$modules || []; + var strictDi = !!currentSpec.$injectorStrict; + modules.unshift('ngMock'); + modules.unshift('ng'); + var injector = currentSpec.$injector; + if (!injector) { + if (strictDi) { + // If strictDi is enabled, annotate the providerInjector blocks + angular.forEach(modules, function(moduleFn) { + if (typeof moduleFn === "function") { + angular.injector.$$annotate(moduleFn); + } + }); + } + injector = currentSpec.$injector = angular.injector(modules, strictDi); + currentSpec.$injectorStrict = strictDi; + } + for (var i = 0, ii = blockFns.length; i < ii; i++) { + if (currentSpec.$injectorStrict) { + // If the injector is strict / strictDi, and the spec wants to inject using automatic + // annotation, then annotate the function here. + injector.annotate(blockFns[i]); + } + try { + /* jshint -W040 *//* Jasmine explicitly provides a `this` object when calling functions */ + injector.invoke(blockFns[i] || angular.noop, this); + /* jshint +W040 */ + } catch (e) { + if (e.stack && errorForStack) { + throw new ErrorAddingDeclarationLocationStack(e, errorForStack); + } + throw e; + } finally { + errorForStack = null; + } + } + } + }; + + + angular.mock.inject.strictDi = function(value) { + value = arguments.length ? !!value : true; + return isSpecRunning() ? workFn() : workFn; + + function workFn() { + if (value !== currentSpec.$injectorStrict) { + if (currentSpec.$injector) { + throw new Error('Injector already created, can not modify strict annotations'); + } else { + currentSpec.$injectorStrict = value; + } + } + } + }; +} + + +})(window, window.angular); diff --git a/lib/test/angular/1.4.3/angular.js b/lib/test/angular/1.4.3/angular.js new file mode 100644 index 0000000000..f7442c0b03 --- /dev/null +++ b/lib/test/angular/1.4.3/angular.js @@ -0,0 +1,28364 @@ +/** + * @license AngularJS v1.4.3 + * (c) 2010-2015 Google, Inc. http://angularjs.org + * License: MIT + */ +(function(window, document, undefined) {'use strict'; + +/** + * @description + * + * This object provides a utility for producing rich Error messages within + * Angular. It can be called as follows: + * + * var exampleMinErr = minErr('example'); + * throw exampleMinErr('one', 'This {0} is {1}', foo, bar); + * + * The above creates an instance of minErr in the example namespace. The + * resulting error will have a namespaced error code of example.one. The + * resulting error will replace {0} with the value of foo, and {1} with the + * value of bar. The object is not restricted in the number of arguments it can + * take. + * + * If fewer arguments are specified than necessary for interpolation, the extra + * interpolation markers will be preserved in the final string. + * + * Since data will be parsed statically during a build step, some restrictions + * are applied with respect to how minErr instances are created and called. + * Instances should have names of the form namespaceMinErr for a minErr created + * using minErr('namespace') . Error codes, namespaces and template strings + * should all be static strings, not variables or general expressions. + * + * @param {string} module The namespace to use for the new minErr instance. + * @param {function} ErrorConstructor Custom error constructor to be instantiated when returning + * error from returned function, for cases when a particular type of error is useful. + * @returns {function(code:string, template:string, ...templateArgs): Error} minErr instance + */ + +function minErr(module, ErrorConstructor) { + ErrorConstructor = ErrorConstructor || Error; + return function() { + var SKIP_INDEXES = 2; + + var templateArgs = arguments, + code = templateArgs[0], + message = '[' + (module ? module + ':' : '') + code + '] ', + template = templateArgs[1], + paramPrefix, i; + + message += template.replace(/\{\d+\}/g, function(match) { + var index = +match.slice(1, -1), + shiftedIndex = index + SKIP_INDEXES; + + if (shiftedIndex < templateArgs.length) { + return toDebugString(templateArgs[shiftedIndex]); + } + + return match; + }); + + message += '\nhttp://errors.angularjs.org/1.4.3/' + + (module ? module + '/' : '') + code; + + for (i = SKIP_INDEXES, paramPrefix = '?'; i < templateArgs.length; i++, paramPrefix = '&') { + message += paramPrefix + 'p' + (i - SKIP_INDEXES) + '=' + + encodeURIComponent(toDebugString(templateArgs[i])); + } + + return new ErrorConstructor(message); + }; +} + +/* We need to tell jshint what variables are being exported */ +/* global angular: true, + msie: true, + jqLite: true, + jQuery: true, + slice: true, + splice: true, + push: true, + toString: true, + ngMinErr: true, + angularModule: true, + uid: true, + REGEX_STRING_REGEXP: true, + VALIDITY_STATE_PROPERTY: true, + + lowercase: true, + uppercase: true, + manualLowercase: true, + manualUppercase: true, + nodeName_: true, + isArrayLike: true, + forEach: true, + forEachSorted: true, + reverseParams: true, + nextUid: true, + setHashKey: true, + extend: true, + toInt: true, + inherit: true, + merge: true, + noop: true, + identity: true, + valueFn: true, + isUndefined: true, + isDefined: true, + isObject: true, + isBlankObject: true, + isString: true, + isNumber: true, + isDate: true, + isArray: true, + isFunction: true, + isRegExp: true, + isWindow: true, + isScope: true, + isFile: true, + isFormData: true, + isBlob: true, + isBoolean: true, + isPromiseLike: true, + trim: true, + escapeForRegexp: true, + isElement: true, + makeMap: true, + includes: true, + arrayRemove: true, + copy: true, + shallowCopy: true, + equals: true, + csp: true, + jq: true, + concat: true, + sliceArgs: true, + bind: true, + toJsonReplacer: true, + toJson: true, + fromJson: true, + convertTimezoneToLocal: true, + timezoneToOffset: true, + startingTag: true, + tryDecodeURIComponent: true, + parseKeyValue: true, + toKeyValue: true, + encodeUriSegment: true, + encodeUriQuery: true, + angularInit: true, + bootstrap: true, + getTestability: true, + snake_case: true, + bindJQuery: true, + assertArg: true, + assertArgFn: true, + assertNotHasOwnProperty: true, + getter: true, + getBlockNodes: true, + hasOwnProperty: true, + createMap: true, + + NODE_TYPE_ELEMENT: true, + NODE_TYPE_ATTRIBUTE: true, + NODE_TYPE_TEXT: true, + NODE_TYPE_COMMENT: true, + NODE_TYPE_DOCUMENT: true, + NODE_TYPE_DOCUMENT_FRAGMENT: true, +*/ + +//////////////////////////////////// + +/** + * @ngdoc module + * @name ng + * @module ng + * @description + * + * # ng (core module) + * The ng module is loaded by default when an AngularJS application is started. The module itself + * contains the essential components for an AngularJS application to function. The table below + * lists a high level breakdown of each of the services/factories, filters, directives and testing + * components available within this core module. + * + * + */ + +var REGEX_STRING_REGEXP = /^\/(.+)\/([a-z]*)$/; + +// The name of a form control's ValidityState property. +// This is used so that it's possible for internal tests to create mock ValidityStates. +var VALIDITY_STATE_PROPERTY = 'validity'; + +/** + * @ngdoc function + * @name angular.lowercase + * @module ng + * @kind function + * + * @description Converts the specified string to lowercase. + * @param {string} string String to be converted to lowercase. + * @returns {string} Lowercased string. + */ +var lowercase = function(string) {return isString(string) ? string.toLowerCase() : string;}; +var hasOwnProperty = Object.prototype.hasOwnProperty; + +/** + * @ngdoc function + * @name angular.uppercase + * @module ng + * @kind function + * + * @description Converts the specified string to uppercase. + * @param {string} string String to be converted to uppercase. + * @returns {string} Uppercased string. + */ +var uppercase = function(string) {return isString(string) ? string.toUpperCase() : string;}; + + +var manualLowercase = function(s) { + /* jshint bitwise: false */ + return isString(s) + ? s.replace(/[A-Z]/g, function(ch) {return String.fromCharCode(ch.charCodeAt(0) | 32);}) + : s; +}; +var manualUppercase = function(s) { + /* jshint bitwise: false */ + return isString(s) + ? s.replace(/[a-z]/g, function(ch) {return String.fromCharCode(ch.charCodeAt(0) & ~32);}) + : s; +}; + + +// String#toLowerCase and String#toUpperCase don't produce correct results in browsers with Turkish +// locale, for this reason we need to detect this case and redefine lowercase/uppercase methods +// with correct but slower alternatives. +if ('i' !== 'I'.toLowerCase()) { + lowercase = manualLowercase; + uppercase = manualUppercase; +} + + +var + msie, // holds major version number for IE, or NaN if UA is not IE. + jqLite, // delay binding since jQuery could be loaded after us. + jQuery, // delay binding + slice = [].slice, + splice = [].splice, + push = [].push, + toString = Object.prototype.toString, + getPrototypeOf = Object.getPrototypeOf, + ngMinErr = minErr('ng'), + + /** @name angular */ + angular = window.angular || (window.angular = {}), + angularModule, + uid = 0; + +/** + * documentMode is an IE-only property + * http://msdn.microsoft.com/en-us/library/ie/cc196988(v=vs.85).aspx + */ +msie = document.documentMode; + + +/** + * @private + * @param {*} obj + * @return {boolean} Returns true if `obj` is an array or array-like object (NodeList, Arguments, + * String ...) + */ +function isArrayLike(obj) { + if (obj == null || isWindow(obj)) { + return false; + } + + // Support: iOS 8.2 (not reproducible in simulator) + // "length" in obj used to prevent JIT error (gh-11508) + var length = "length" in Object(obj) && obj.length; + + if (obj.nodeType === NODE_TYPE_ELEMENT && length) { + return true; + } + + return isString(obj) || isArray(obj) || length === 0 || + typeof length === 'number' && length > 0 && (length - 1) in obj; +} + +/** + * @ngdoc function + * @name angular.forEach + * @module ng + * @kind function + * + * @description + * Invokes the `iterator` function once for each item in `obj` collection, which can be either an + * object or an array. The `iterator` function is invoked with `iterator(value, key, obj)`, where `value` + * is the value of an object property or an array element, `key` is the object property key or + * array element index and obj is the `obj` itself. Specifying a `context` for the function is optional. + * + * It is worth noting that `.forEach` does not iterate over inherited properties because it filters + * using the `hasOwnProperty` method. + * + * Unlike ES262's + * [Array.prototype.forEach](http://www.ecma-international.org/ecma-262/5.1/#sec-15.4.4.18), + * Providing 'undefined' or 'null' values for `obj` will not throw a TypeError, but rather just + * return the value provided. + * + ```js + var values = {name: 'misko', gender: 'male'}; + var log = []; + angular.forEach(values, function(value, key) { + this.push(key + ': ' + value); + }, log); + expect(log).toEqual(['name: misko', 'gender: male']); + ``` + * + * @param {Object|Array} obj Object to iterate over. + * @param {Function} iterator Iterator function. + * @param {Object=} context Object to become context (`this`) for the iterator function. + * @returns {Object|Array} Reference to `obj`. + */ + +function forEach(obj, iterator, context) { + var key, length; + if (obj) { + if (isFunction(obj)) { + for (key in obj) { + // Need to check if hasOwnProperty exists, + // as on IE8 the result of querySelectorAll is an object without a hasOwnProperty function + if (key != 'prototype' && key != 'length' && key != 'name' && (!obj.hasOwnProperty || obj.hasOwnProperty(key))) { + iterator.call(context, obj[key], key, obj); + } + } + } else if (isArray(obj) || isArrayLike(obj)) { + var isPrimitive = typeof obj !== 'object'; + for (key = 0, length = obj.length; key < length; key++) { + if (isPrimitive || key in obj) { + iterator.call(context, obj[key], key, obj); + } + } + } else if (obj.forEach && obj.forEach !== forEach) { + obj.forEach(iterator, context, obj); + } else if (isBlankObject(obj)) { + // createMap() fast path --- Safe to avoid hasOwnProperty check because prototype chain is empty + for (key in obj) { + iterator.call(context, obj[key], key, obj); + } + } else if (typeof obj.hasOwnProperty === 'function') { + // Slow path for objects inheriting Object.prototype, hasOwnProperty check needed + for (key in obj) { + if (obj.hasOwnProperty(key)) { + iterator.call(context, obj[key], key, obj); + } + } + } else { + // Slow path for objects which do not have a method `hasOwnProperty` + for (key in obj) { + if (hasOwnProperty.call(obj, key)) { + iterator.call(context, obj[key], key, obj); + } + } + } + } + return obj; +} + +function forEachSorted(obj, iterator, context) { + var keys = Object.keys(obj).sort(); + for (var i = 0; i < keys.length; i++) { + iterator.call(context, obj[keys[i]], keys[i]); + } + return keys; +} + + +/** + * when using forEach the params are value, key, but it is often useful to have key, value. + * @param {function(string, *)} iteratorFn + * @returns {function(*, string)} + */ +function reverseParams(iteratorFn) { + return function(value, key) { iteratorFn(key, value); }; +} + +/** + * A consistent way of creating unique IDs in angular. + * + * Using simple numbers allows us to generate 28.6 million unique ids per second for 10 years before + * we hit number precision issues in JavaScript. + * + * Math.pow(2,53) / 60 / 60 / 24 / 365 / 10 = 28.6M + * + * @returns {number} an unique alpha-numeric string + */ +function nextUid() { + return ++uid; +} + + +/** + * Set or clear the hashkey for an object. + * @param obj object + * @param h the hashkey (!truthy to delete the hashkey) + */ +function setHashKey(obj, h) { + if (h) { + obj.$$hashKey = h; + } else { + delete obj.$$hashKey; + } +} + + +function baseExtend(dst, objs, deep) { + var h = dst.$$hashKey; + + for (var i = 0, ii = objs.length; i < ii; ++i) { + var obj = objs[i]; + if (!isObject(obj) && !isFunction(obj)) continue; + var keys = Object.keys(obj); + for (var j = 0, jj = keys.length; j < jj; j++) { + var key = keys[j]; + var src = obj[key]; + + if (deep && isObject(src)) { + if (isDate(src)) { + dst[key] = new Date(src.valueOf()); + } else { + if (!isObject(dst[key])) dst[key] = isArray(src) ? [] : {}; + baseExtend(dst[key], [src], true); + } + } else { + dst[key] = src; + } + } + } + + setHashKey(dst, h); + return dst; +} + +/** + * @ngdoc function + * @name angular.extend + * @module ng + * @kind function + * + * @description + * Extends the destination object `dst` by copying own enumerable properties from the `src` object(s) + * to `dst`. You can specify multiple `src` objects. If you want to preserve original objects, you can do so + * by passing an empty object as the target: `var object = angular.extend({}, object1, object2)`. + * + * **Note:** Keep in mind that `angular.extend` does not support recursive merge (deep copy). Use + * {@link angular.merge} for this. + * + * @param {Object} dst Destination object. + * @param {...Object} src Source object(s). + * @returns {Object} Reference to `dst`. + */ +function extend(dst) { + return baseExtend(dst, slice.call(arguments, 1), false); +} + + +/** +* @ngdoc function +* @name angular.merge +* @module ng +* @kind function +* +* @description +* Deeply extends the destination object `dst` by copying own enumerable properties from the `src` object(s) +* to `dst`. You can specify multiple `src` objects. If you want to preserve original objects, you can do so +* by passing an empty object as the target: `var object = angular.merge({}, object1, object2)`. +* +* Unlike {@link angular.extend extend()}, `merge()` recursively descends into object properties of source +* objects, performing a deep copy. +* +* @param {Object} dst Destination object. +* @param {...Object} src Source object(s). +* @returns {Object} Reference to `dst`. +*/ +function merge(dst) { + return baseExtend(dst, slice.call(arguments, 1), true); +} + + + +function toInt(str) { + return parseInt(str, 10); +} + + +function inherit(parent, extra) { + return extend(Object.create(parent), extra); +} + +/** + * @ngdoc function + * @name angular.noop + * @module ng + * @kind function + * + * @description + * A function that performs no operations. This function can be useful when writing code in the + * functional style. + ```js + function foo(callback) { + var result = calculateResult(); + (callback || angular.noop)(result); + } + ``` + */ +function noop() {} +noop.$inject = []; + + +/** + * @ngdoc function + * @name angular.identity + * @module ng + * @kind function + * + * @description + * A function that returns its first argument. This function is useful when writing code in the + * functional style. + * + ```js + function transformer(transformationFn, value) { + return (transformationFn || angular.identity)(value); + }; + ``` + * @param {*} value to be returned. + * @returns {*} the value passed in. + */ +function identity($) {return $;} +identity.$inject = []; + + +function valueFn(value) {return function() {return value;};} + +function hasCustomToString(obj) { + return isFunction(obj.toString) && obj.toString !== Object.prototype.toString; +} + + +/** + * @ngdoc function + * @name angular.isUndefined + * @module ng + * @kind function + * + * @description + * Determines if a reference is undefined. + * + * @param {*} value Reference to check. + * @returns {boolean} True if `value` is undefined. + */ +function isUndefined(value) {return typeof value === 'undefined';} + + +/** + * @ngdoc function + * @name angular.isDefined + * @module ng + * @kind function + * + * @description + * Determines if a reference is defined. + * + * @param {*} value Reference to check. + * @returns {boolean} True if `value` is defined. + */ +function isDefined(value) {return typeof value !== 'undefined';} + + +/** + * @ngdoc function + * @name angular.isObject + * @module ng + * @kind function + * + * @description + * Determines if a reference is an `Object`. Unlike `typeof` in JavaScript, `null`s are not + * considered to be objects. Note that JavaScript arrays are objects. + * + * @param {*} value Reference to check. + * @returns {boolean} True if `value` is an `Object` but not `null`. + */ +function isObject(value) { + // http://jsperf.com/isobject4 + return value !== null && typeof value === 'object'; +} + + +/** + * Determine if a value is an object with a null prototype + * + * @returns {boolean} True if `value` is an `Object` with a null prototype + */ +function isBlankObject(value) { + return value !== null && typeof value === 'object' && !getPrototypeOf(value); +} + + +/** + * @ngdoc function + * @name angular.isString + * @module ng + * @kind function + * + * @description + * Determines if a reference is a `String`. + * + * @param {*} value Reference to check. + * @returns {boolean} True if `value` is a `String`. + */ +function isString(value) {return typeof value === 'string';} + + +/** + * @ngdoc function + * @name angular.isNumber + * @module ng + * @kind function + * + * @description + * Determines if a reference is a `Number`. + * + * This includes the "special" numbers `NaN`, `+Infinity` and `-Infinity`. + * + * If you wish to exclude these then you can use the native + * [`isFinite'](https://developer.mozilla.org/en-US/docs/Web/JavaScript/Reference/Global_Objects/isFinite) + * method. + * + * @param {*} value Reference to check. + * @returns {boolean} True if `value` is a `Number`. + */ +function isNumber(value) {return typeof value === 'number';} + + +/** + * @ngdoc function + * @name angular.isDate + * @module ng + * @kind function + * + * @description + * Determines if a value is a date. + * + * @param {*} value Reference to check. + * @returns {boolean} True if `value` is a `Date`. + */ +function isDate(value) { + return toString.call(value) === '[object Date]'; +} + + +/** + * @ngdoc function + * @name angular.isArray + * @module ng + * @kind function + * + * @description + * Determines if a reference is an `Array`. + * + * @param {*} value Reference to check. + * @returns {boolean} True if `value` is an `Array`. + */ +var isArray = Array.isArray; + +/** + * @ngdoc function + * @name angular.isFunction + * @module ng + * @kind function + * + * @description + * Determines if a reference is a `Function`. + * + * @param {*} value Reference to check. + * @returns {boolean} True if `value` is a `Function`. + */ +function isFunction(value) {return typeof value === 'function';} + + +/** + * Determines if a value is a regular expression object. + * + * @private + * @param {*} value Reference to check. + * @returns {boolean} True if `value` is a `RegExp`. + */ +function isRegExp(value) { + return toString.call(value) === '[object RegExp]'; +} + + +/** + * Checks if `obj` is a window object. + * + * @private + * @param {*} obj Object to check + * @returns {boolean} True if `obj` is a window obj. + */ +function isWindow(obj) { + return obj && obj.window === obj; +} + + +function isScope(obj) { + return obj && obj.$evalAsync && obj.$watch; +} + + +function isFile(obj) { + return toString.call(obj) === '[object File]'; +} + + +function isFormData(obj) { + return toString.call(obj) === '[object FormData]'; +} + + +function isBlob(obj) { + return toString.call(obj) === '[object Blob]'; +} + + +function isBoolean(value) { + return typeof value === 'boolean'; +} + + +function isPromiseLike(obj) { + return obj && isFunction(obj.then); +} + + +var TYPED_ARRAY_REGEXP = /^\[object (Uint8(Clamped)?)|(Uint16)|(Uint32)|(Int8)|(Int16)|(Int32)|(Float(32)|(64))Array\]$/; +function isTypedArray(value) { + return TYPED_ARRAY_REGEXP.test(toString.call(value)); +} + + +var trim = function(value) { + return isString(value) ? value.trim() : value; +}; + +// Copied from: +// http://docs.closure-library.googlecode.com/git/local_closure_goog_string_string.js.source.html#line1021 +// Prereq: s is a string. +var escapeForRegexp = function(s) { + return s.replace(/([-()\[\]{}+?*.$\^|,:#= 0) { + array.splice(index, 1); + } + return index; +} + +/** + * @ngdoc function + * @name angular.copy + * @module ng + * @kind function + * + * @description + * Creates a deep copy of `source`, which should be an object or an array. + * + * * If no destination is supplied, a copy of the object or array is created. + * * If a destination is provided, all of its elements (for arrays) or properties (for objects) + * are deleted and then all elements/properties from the source are copied to it. + * * If `source` is not an object or array (inc. `null` and `undefined`), `source` is returned. + * * If `source` is identical to 'destination' an exception will be thrown. + * + * @param {*} source The source that will be used to make a copy. + * Can be any type, including primitives, `null`, and `undefined`. + * @param {(Object|Array)=} destination Destination into which the source is copied. If + * provided, must be of the same type as `source`. + * @returns {*} The copy or updated `destination`, if `destination` was specified. + * + * @example +
+
+
+
+
+ form = {{user | json}}
+ master = {{master | json}}
+ ').append(element).html();
+ try {
+ return element[0].nodeType === NODE_TYPE_TEXT ? lowercase(elemHtml) :
+ elemHtml.
+ match(/^(<[^>]+>)/)[1].
+ replace(/^<([\w\-]+)/, function(match, nodeName) { return '<' + lowercase(nodeName); });
+ } catch (e) {
+ return lowercase(elemHtml);
+ }
+
+}
+
+
+/////////////////////////////////////////////////
+
+/**
+ * Tries to decode the URI component without throwing an exception.
+ *
+ * @private
+ * @param str value potential URI component to check.
+ * @returns {boolean} True if `value` can be decoded
+ * with the decodeURIComponent function.
+ */
+function tryDecodeURIComponent(value) {
+ try {
+ return decodeURIComponent(value);
+ } catch (e) {
+ // Ignore any invalid uri component
+ }
+}
+
+
+/**
+ * Parses an escaped url query string into key-value pairs.
+ * @returns {Object.}
+ */
+function parseKeyValue(/**string*/keyValue) {
+ var obj = {}, key_value, key;
+ forEach((keyValue || "").split('&'), function(keyValue) {
+ if (keyValue) {
+ key_value = keyValue.replace(/\+/g,'%20').split('=');
+ key = tryDecodeURIComponent(key_value[0]);
+ if (isDefined(key)) {
+ var val = isDefined(key_value[1]) ? tryDecodeURIComponent(key_value[1]) : true;
+ if (!hasOwnProperty.call(obj, key)) {
+ obj[key] = val;
+ } else if (isArray(obj[key])) {
+ obj[key].push(val);
+ } else {
+ obj[key] = [obj[key],val];
+ }
+ }
+ }
+ });
+ return obj;
+}
+
+function toKeyValue(obj) {
+ var parts = [];
+ forEach(obj, function(value, key) {
+ if (isArray(value)) {
+ forEach(value, function(arrayValue) {
+ parts.push(encodeUriQuery(key, true) +
+ (arrayValue === true ? '' : '=' + encodeUriQuery(arrayValue, true)));
+ });
+ } else {
+ parts.push(encodeUriQuery(key, true) +
+ (value === true ? '' : '=' + encodeUriQuery(value, true)));
+ }
+ });
+ return parts.length ? parts.join('&') : '';
+}
+
+
+/**
+ * We need our custom method because encodeURIComponent is too aggressive and doesn't follow
+ * http://www.ietf.org/rfc/rfc3986.txt with regards to the character set (pchar) allowed in path
+ * segments:
+ * segment = *pchar
+ * pchar = unreserved / pct-encoded / sub-delims / ":" / "@"
+ * pct-encoded = "%" HEXDIG HEXDIG
+ * unreserved = ALPHA / DIGIT / "-" / "." / "_" / "~"
+ * sub-delims = "!" / "$" / "&" / "'" / "(" / ")"
+ * / "*" / "+" / "," / ";" / "="
+ */
+function encodeUriSegment(val) {
+ return encodeUriQuery(val, true).
+ replace(/%26/gi, '&').
+ replace(/%3D/gi, '=').
+ replace(/%2B/gi, '+');
+}
+
+
+/**
+ * This method is intended for encoding *key* or *value* parts of query component. We need a custom
+ * method because encodeURIComponent is too aggressive and encodes stuff that doesn't have to be
+ * encoded per http://tools.ietf.org/html/rfc3986:
+ * query = *( pchar / "/" / "?" )
+ * pchar = unreserved / pct-encoded / sub-delims / ":" / "@"
+ * unreserved = ALPHA / DIGIT / "-" / "." / "_" / "~"
+ * pct-encoded = "%" HEXDIG HEXDIG
+ * sub-delims = "!" / "$" / "&" / "'" / "(" / ")"
+ * / "*" / "+" / "," / ";" / "="
+ */
+function encodeUriQuery(val, pctEncodeSpaces) {
+ return encodeURIComponent(val).
+ replace(/%40/gi, '@').
+ replace(/%3A/gi, ':').
+ replace(/%24/g, '$').
+ replace(/%2C/gi, ',').
+ replace(/%3B/gi, ';').
+ replace(/%20/g, (pctEncodeSpaces ? '%20' : '+'));
+}
+
+var ngAttrPrefixes = ['ng-', 'data-ng-', 'ng:', 'x-ng-'];
+
+function getNgAttribute(element, ngAttr) {
+ var attr, i, ii = ngAttrPrefixes.length;
+ for (i = 0; i < ii; ++i) {
+ attr = ngAttrPrefixes[i] + ngAttr;
+ if (isString(attr = element.getAttribute(attr))) {
+ return attr;
+ }
+ }
+ return null;
+}
+
+/**
+ * @ngdoc directive
+ * @name ngApp
+ * @module ng
+ *
+ * @element ANY
+ * @param {angular.Module} ngApp an optional application
+ * {@link angular.module module} name to load.
+ * @param {boolean=} ngStrictDi if this attribute is present on the app element, the injector will be
+ * created in "strict-di" mode. This means that the application will fail to invoke functions which
+ * do not use explicit function annotation (and are thus unsuitable for minification), as described
+ * in {@link guide/di the Dependency Injection guide}, and useful debugging info will assist in
+ * tracking down the root of these bugs.
+ *
+ * @description
+ *
+ * Use this directive to **auto-bootstrap** an AngularJS application. The `ngApp` directive
+ * designates the **root element** of the application and is typically placed near the root element
+ * of the page - e.g. on the `` or `` tags.
+ *
+ * Only one AngularJS application can be auto-bootstrapped per HTML document. The first `ngApp`
+ * found in the document will be used to define the root element to auto-bootstrap as an
+ * application. To run multiple applications in an HTML document you must manually bootstrap them using
+ * {@link angular.bootstrap} instead. AngularJS applications cannot be nested within each other.
+ *
+ * You can specify an **AngularJS module** to be used as the root module for the application. This
+ * module will be loaded into the {@link auto.$injector} when the application is bootstrapped. It
+ * should contain the application code needed or have dependencies on other modules that will
+ * contain the code. See {@link angular.module} for more information.
+ *
+ * In the example below if the `ngApp` directive were not placed on the `html` element then the
+ * document would not be compiled, the `AppController` would not be instantiated and the `{{ a+b }}`
+ * would not be resolved to `3`.
+ *
+ * `ngApp` is the easiest, and most common way to bootstrap an application.
+ *
+
+
+
+
+ angular.module('ngAppDemo', []).controller('ngAppDemoController', function($scope) {
+ $scope.a = 1;
+ $scope.b = 2;
+ });
+
+
+ *
+ * Using `ngStrictDi`, you would see something like this:
+ *
+
+
+
+
+ angular.module('ngAppStrictDemo', [])
+ // BadController will fail to instantiate, due to relying on automatic function annotation,
+ // rather than an explicit annotation
+ .controller('BadController', function($scope) {
+ $scope.a = 1;
+ $scope.b = 2;
+ })
+ // Unlike BadController, GoodController1 and GoodController2 will not fail to be instantiated,
+ // due to using explicit annotations using the array style and $inject property, respectively.
+ .controller('GoodController1', ['$scope', function($scope) {
+ $scope.a = 1;
+ $scope.b = 2;
+ }])
+ .controller('GoodController2', GoodController2);
+ function GoodController2($scope) {
+ $scope.name = "World";
+ }
+ GoodController2.$inject = ['$scope'];
+
+
+ div[ng-controller] {
+ margin-bottom: 1em;
+ -webkit-border-radius: 4px;
+ border-radius: 4px;
+ border: 1px solid;
+ padding: .5em;
+ }
+ div[ng-controller^=Good] {
+ border-color: #d6e9c6;
+ background-color: #dff0d8;
+ color: #3c763d;
+ }
+ div[ng-controller^=Bad] {
+ border-color: #ebccd1;
+ background-color: #f2dede;
+ color: #a94442;
+ margin-bottom: 0;
+ }
+
+
+ */
+function angularInit(element, bootstrap) {
+ var appElement,
+ module,
+ config = {};
+
+ // The element `element` has priority over any other element
+ forEach(ngAttrPrefixes, function(prefix) {
+ var name = prefix + 'app';
+
+ if (!appElement && element.hasAttribute && element.hasAttribute(name)) {
+ appElement = element;
+ module = element.getAttribute(name);
+ }
+ });
+ forEach(ngAttrPrefixes, function(prefix) {
+ var name = prefix + 'app';
+ var candidate;
+
+ if (!appElement && (candidate = element.querySelector('[' + name.replace(':', '\\:') + ']'))) {
+ appElement = candidate;
+ module = candidate.getAttribute(name);
+ }
+ });
+ if (appElement) {
+ config.strictDi = getNgAttribute(appElement, "strict-di") !== null;
+ bootstrap(appElement, module ? [module] : [], config);
+ }
+}
+
+/**
+ * @ngdoc function
+ * @name angular.bootstrap
+ * @module ng
+ * @description
+ * Use this function to manually start up angular application.
+ *
+ * See: {@link guide/bootstrap Bootstrap}
+ *
+ * Note that Protractor based end-to-end tests cannot use this function to bootstrap manually.
+ * They must use {@link ng.directive:ngApp ngApp}.
+ *
+ * Angular will detect if it has been loaded into the browser more than once and only allow the
+ * first loaded script to be bootstrapped and will report a warning to the browser console for
+ * each of the subsequent scripts. This prevents strange results in applications, where otherwise
+ * multiple instances of Angular try to work on the DOM.
+ *
+ * ```html
+ *
+ *
+ *
+ * =} modules an array of modules to load into the application.
+ * Each item in the array should be the name of a predefined module or a (DI annotated)
+ * function that will be invoked by the injector as a `config` block.
+ * See: {@link angular.module modules}
+ * @param {Object=} config an object for defining configuration options for the application. The
+ * following keys are supported:
+ *
+ * * `strictDi` - disable automatic function annotation for the application. This is meant to
+ * assist in finding bugs which break minified code. Defaults to `false`.
+ *
+ * @returns {auto.$injector} Returns the newly created injector for this app.
+ */
+function bootstrap(element, modules, config) {
+ if (!isObject(config)) config = {};
+ var defaultConfig = {
+ strictDi: false
+ };
+ config = extend(defaultConfig, config);
+ var doBootstrap = function() {
+ element = jqLite(element);
+
+ if (element.injector()) {
+ var tag = (element[0] === document) ? 'document' : startingTag(element);
+ //Encode angle brackets to prevent input from being sanitized to empty string #8683
+ throw ngMinErr(
+ 'btstrpd',
+ "App Already Bootstrapped with this Element '{0}'",
+ tag.replace(//,'>'));
+ }
+
+ modules = modules || [];
+ modules.unshift(['$provide', function($provide) {
+ $provide.value('$rootElement', element);
+ }]);
+
+ if (config.debugInfoEnabled) {
+ // Pushing so that this overrides `debugInfoEnabled` setting defined in user's `modules`.
+ modules.push(['$compileProvider', function($compileProvider) {
+ $compileProvider.debugInfoEnabled(true);
+ }]);
+ }
+
+ modules.unshift('ng');
+ var injector = createInjector(modules, config.strictDi);
+ injector.invoke(['$rootScope', '$rootElement', '$compile', '$injector',
+ function bootstrapApply(scope, element, compile, injector) {
+ scope.$apply(function() {
+ element.data('$injector', injector);
+ compile(element)(scope);
+ });
+ }]
+ );
+ return injector;
+ };
+
+ var NG_ENABLE_DEBUG_INFO = /^NG_ENABLE_DEBUG_INFO!/;
+ var NG_DEFER_BOOTSTRAP = /^NG_DEFER_BOOTSTRAP!/;
+
+ if (window && NG_ENABLE_DEBUG_INFO.test(window.name)) {
+ config.debugInfoEnabled = true;
+ window.name = window.name.replace(NG_ENABLE_DEBUG_INFO, '');
+ }
+
+ if (window && !NG_DEFER_BOOTSTRAP.test(window.name)) {
+ return doBootstrap();
+ }
+
+ window.name = window.name.replace(NG_DEFER_BOOTSTRAP, '');
+ angular.resumeBootstrap = function(extraModules) {
+ forEach(extraModules, function(module) {
+ modules.push(module);
+ });
+ return doBootstrap();
+ };
+
+ if (isFunction(angular.resumeDeferredBootstrap)) {
+ angular.resumeDeferredBootstrap();
+ }
+}
+
+/**
+ * @ngdoc function
+ * @name angular.reloadWithDebugInfo
+ * @module ng
+ * @description
+ * Use this function to reload the current application with debug information turned on.
+ * This takes precedence over a call to `$compileProvider.debugInfoEnabled(false)`.
+ *
+ * See {@link ng.$compileProvider#debugInfoEnabled} for more.
+ */
+function reloadWithDebugInfo() {
+ window.name = 'NG_ENABLE_DEBUG_INFO!' + window.name;
+ window.location.reload();
+}
+
+/**
+ * @name angular.getTestability
+ * @module ng
+ * @description
+ * Get the testability service for the instance of Angular on the given
+ * element.
+ * @param {DOMElement} element DOM element which is the root of angular application.
+ */
+function getTestability(rootElement) {
+ var injector = angular.element(rootElement).injector();
+ if (!injector) {
+ throw ngMinErr('test',
+ 'no injector found for element argument to getTestability');
+ }
+ return injector.get('$$testability');
+}
+
+var SNAKE_CASE_REGEXP = /[A-Z]/g;
+function snake_case(name, separator) {
+ separator = separator || '_';
+ return name.replace(SNAKE_CASE_REGEXP, function(letter, pos) {
+ return (pos ? separator : '') + letter.toLowerCase();
+ });
+}
+
+var bindJQueryFired = false;
+var skipDestroyOnNextJQueryCleanData;
+function bindJQuery() {
+ var originalCleanData;
+
+ if (bindJQueryFired) {
+ return;
+ }
+
+ // bind to jQuery if present;
+ var jqName = jq();
+ jQuery = window.jQuery; // use default jQuery.
+ if (isDefined(jqName)) { // `ngJq` present
+ jQuery = jqName === null ? undefined : window[jqName]; // if empty; use jqLite. if not empty, use jQuery specified by `ngJq`.
+ }
+
+ // Use jQuery if it exists with proper functionality, otherwise default to us.
+ // Angular 1.2+ requires jQuery 1.7+ for on()/off() support.
+ // Angular 1.3+ technically requires at least jQuery 2.1+ but it may work with older
+ // versions. It will not work for sure with jQuery <1.7, though.
+ if (jQuery && jQuery.fn.on) {
+ jqLite = jQuery;
+ extend(jQuery.fn, {
+ scope: JQLitePrototype.scope,
+ isolateScope: JQLitePrototype.isolateScope,
+ controller: JQLitePrototype.controller,
+ injector: JQLitePrototype.injector,
+ inheritedData: JQLitePrototype.inheritedData
+ });
+
+ // All nodes removed from the DOM via various jQuery APIs like .remove()
+ // are passed through jQuery.cleanData. Monkey-patch this method to fire
+ // the $destroy event on all removed nodes.
+ originalCleanData = jQuery.cleanData;
+ jQuery.cleanData = function(elems) {
+ var events;
+ if (!skipDestroyOnNextJQueryCleanData) {
+ for (var i = 0, elem; (elem = elems[i]) != null; i++) {
+ events = jQuery._data(elem, "events");
+ if (events && events.$destroy) {
+ jQuery(elem).triggerHandler('$destroy');
+ }
+ }
+ } else {
+ skipDestroyOnNextJQueryCleanData = false;
+ }
+ originalCleanData(elems);
+ };
+ } else {
+ jqLite = JQLite;
+ }
+
+ angular.element = jqLite;
+
+ // Prevent double-proxying.
+ bindJQueryFired = true;
+}
+
+/**
+ * throw error if the argument is falsy.
+ */
+function assertArg(arg, name, reason) {
+ if (!arg) {
+ throw ngMinErr('areq', "Argument '{0}' is {1}", (name || '?'), (reason || "required"));
+ }
+ return arg;
+}
+
+function assertArgFn(arg, name, acceptArrayAnnotation) {
+ if (acceptArrayAnnotation && isArray(arg)) {
+ arg = arg[arg.length - 1];
+ }
+
+ assertArg(isFunction(arg), name, 'not a function, got ' +
+ (arg && typeof arg === 'object' ? arg.constructor.name || 'Object' : typeof arg));
+ return arg;
+}
+
+/**
+ * throw error if the name given is hasOwnProperty
+ * @param {String} name the name to test
+ * @param {String} context the context in which the name is used, such as module or directive
+ */
+function assertNotHasOwnProperty(name, context) {
+ if (name === 'hasOwnProperty') {
+ throw ngMinErr('badname', "hasOwnProperty is not a valid {0} name", context);
+ }
+}
+
+/**
+ * Return the value accessible from the object by path. Any undefined traversals are ignored
+ * @param {Object} obj starting object
+ * @param {String} path path to traverse
+ * @param {boolean} [bindFnToScope=true]
+ * @returns {Object} value as accessible by path
+ */
+//TODO(misko): this function needs to be removed
+function getter(obj, path, bindFnToScope) {
+ if (!path) return obj;
+ var keys = path.split('.');
+ var key;
+ var lastInstance = obj;
+ var len = keys.length;
+
+ for (var i = 0; i < len; i++) {
+ key = keys[i];
+ if (obj) {
+ obj = (lastInstance = obj)[key];
+ }
+ }
+ if (!bindFnToScope && isFunction(obj)) {
+ return bind(lastInstance, obj);
+ }
+ return obj;
+}
+
+/**
+ * Return the DOM siblings between the first and last node in the given array.
+ * @param {Array} array like object
+ * @returns {jqLite} jqLite collection containing the nodes
+ */
+function getBlockNodes(nodes) {
+ // TODO(perf): just check if all items in `nodes` are siblings and if they are return the original
+ // collection, otherwise update the original collection.
+ var node = nodes[0];
+ var endNode = nodes[nodes.length - 1];
+ var blockNodes = [node];
+
+ do {
+ node = node.nextSibling;
+ if (!node) break;
+ blockNodes.push(node);
+ } while (node !== endNode);
+
+ return jqLite(blockNodes);
+}
+
+
+/**
+ * Creates a new object without a prototype. This object is useful for lookup without having to
+ * guard against prototypically inherited properties via hasOwnProperty.
+ *
+ * Related micro-benchmarks:
+ * - http://jsperf.com/object-create2
+ * - http://jsperf.com/proto-map-lookup/2
+ * - http://jsperf.com/for-in-vs-object-keys2
+ *
+ * @returns {Object}
+ */
+function createMap() {
+ return Object.create(null);
+}
+
+var NODE_TYPE_ELEMENT = 1;
+var NODE_TYPE_ATTRIBUTE = 2;
+var NODE_TYPE_TEXT = 3;
+var NODE_TYPE_COMMENT = 8;
+var NODE_TYPE_DOCUMENT = 9;
+var NODE_TYPE_DOCUMENT_FRAGMENT = 11;
+
+/**
+ * @ngdoc type
+ * @name angular.Module
+ * @module ng
+ * @description
+ *
+ * Interface for configuring angular {@link angular.module modules}.
+ */
+
+function setupModuleLoader(window) {
+
+ var $injectorMinErr = minErr('$injector');
+ var ngMinErr = minErr('ng');
+
+ function ensure(obj, name, factory) {
+ return obj[name] || (obj[name] = factory());
+ }
+
+ var angular = ensure(window, 'angular', Object);
+
+ // We need to expose `angular.$$minErr` to modules such as `ngResource` that reference it during bootstrap
+ angular.$$minErr = angular.$$minErr || minErr;
+
+ return ensure(angular, 'module', function() {
+ /** @type {Object.} */
+ var modules = {};
+
+ /**
+ * @ngdoc function
+ * @name angular.module
+ * @module ng
+ * @description
+ *
+ * The `angular.module` is a global place for creating, registering and retrieving Angular
+ * modules.
+ * All modules (angular core or 3rd party) that should be available to an application must be
+ * registered using this mechanism.
+ *
+ * When passed two or more arguments, a new module is created. If passed only one argument, an
+ * existing module (the name passed as the first argument to `module`) is retrieved.
+ *
+ *
+ * # Module
+ *
+ * A module is a collection of services, directives, controllers, filters, and configuration information.
+ * `angular.module` is used to configure the {@link auto.$injector $injector}.
+ *
+ * ```js
+ * // Create a new module
+ * var myModule = angular.module('myModule', []);
+ *
+ * // register a new service
+ * myModule.value('appName', 'MyCoolApp');
+ *
+ * // configure existing services inside initialization blocks.
+ * myModule.config(['$locationProvider', function($locationProvider) {
+ * // Configure existing providers
+ * $locationProvider.hashPrefix('!');
+ * }]);
+ * ```
+ *
+ * Then you can create an injector and load your modules like this:
+ *
+ * ```js
+ * var injector = angular.injector(['ng', 'myModule'])
+ * ```
+ *
+ * However it's more likely that you'll just use
+ * {@link ng.directive:ngApp ngApp} or
+ * {@link angular.bootstrap} to simplify this process for you.
+ *
+ * @param {!string} name The name of the module to create or retrieve.
+ * @param {!Array.=} requires If specified then new module is being created. If
+ * unspecified then the module is being retrieved for further configuration.
+ * @param {Function=} configFn Optional configuration function for the module. Same as
+ * {@link angular.Module#config Module#config()}.
+ * @returns {module} new module with the {@link angular.Module} api.
+ */
+ return function module(name, requires, configFn) {
+ var assertNotHasOwnProperty = function(name, context) {
+ if (name === 'hasOwnProperty') {
+ throw ngMinErr('badname', 'hasOwnProperty is not a valid {0} name', context);
+ }
+ };
+
+ assertNotHasOwnProperty(name, 'module');
+ if (requires && modules.hasOwnProperty(name)) {
+ modules[name] = null;
+ }
+ return ensure(modules, name, function() {
+ if (!requires) {
+ throw $injectorMinErr('nomod', "Module '{0}' is not available! You either misspelled " +
+ "the module name or forgot to load it. If registering a module ensure that you " +
+ "specify the dependencies as the second argument.", name);
+ }
+
+ /** @type {!Array.>} */
+ var invokeQueue = [];
+
+ /** @type {!Array.} */
+ var configBlocks = [];
+
+ /** @type {!Array.} */
+ var runBlocks = [];
+
+ var config = invokeLater('$injector', 'invoke', 'push', configBlocks);
+
+ /** @type {angular.Module} */
+ var moduleInstance = {
+ // Private state
+ _invokeQueue: invokeQueue,
+ _configBlocks: configBlocks,
+ _runBlocks: runBlocks,
+
+ /**
+ * @ngdoc property
+ * @name angular.Module#requires
+ * @module ng
+ *
+ * @description
+ * Holds the list of modules which the injector will load before the current module is
+ * loaded.
+ */
+ requires: requires,
+
+ /**
+ * @ngdoc property
+ * @name angular.Module#name
+ * @module ng
+ *
+ * @description
+ * Name of the module.
+ */
+ name: name,
+
+
+ /**
+ * @ngdoc method
+ * @name angular.Module#provider
+ * @module ng
+ * @param {string} name service name
+ * @param {Function} providerType Construction function for creating new instance of the
+ * service.
+ * @description
+ * See {@link auto.$provide#provider $provide.provider()}.
+ */
+ provider: invokeLaterAndSetModuleName('$provide', 'provider'),
+
+ /**
+ * @ngdoc method
+ * @name angular.Module#factory
+ * @module ng
+ * @param {string} name service name
+ * @param {Function} providerFunction Function for creating new instance of the service.
+ * @description
+ * See {@link auto.$provide#factory $provide.factory()}.
+ */
+ factory: invokeLaterAndSetModuleName('$provide', 'factory'),
+
+ /**
+ * @ngdoc method
+ * @name angular.Module#service
+ * @module ng
+ * @param {string} name service name
+ * @param {Function} constructor A constructor function that will be instantiated.
+ * @description
+ * See {@link auto.$provide#service $provide.service()}.
+ */
+ service: invokeLaterAndSetModuleName('$provide', 'service'),
+
+ /**
+ * @ngdoc method
+ * @name angular.Module#value
+ * @module ng
+ * @param {string} name service name
+ * @param {*} object Service instance object.
+ * @description
+ * See {@link auto.$provide#value $provide.value()}.
+ */
+ value: invokeLater('$provide', 'value'),
+
+ /**
+ * @ngdoc method
+ * @name angular.Module#constant
+ * @module ng
+ * @param {string} name constant name
+ * @param {*} object Constant value.
+ * @description
+ * Because the constant are fixed, they get applied before other provide methods.
+ * See {@link auto.$provide#constant $provide.constant()}.
+ */
+ constant: invokeLater('$provide', 'constant', 'unshift'),
+
+ /**
+ * @ngdoc method
+ * @name angular.Module#decorator
+ * @module ng
+ * @param {string} The name of the service to decorate.
+ * @param {Function} This function will be invoked when the service needs to be
+ * instantiated and should return the decorated service instance.
+ * @description
+ * See {@link auto.$provide#decorator $provide.decorator()}.
+ */
+ decorator: invokeLaterAndSetModuleName('$provide', 'decorator'),
+
+ /**
+ * @ngdoc method
+ * @name angular.Module#animation
+ * @module ng
+ * @param {string} name animation name
+ * @param {Function} animationFactory Factory function for creating new instance of an
+ * animation.
+ * @description
+ *
+ * **NOTE**: animations take effect only if the **ngAnimate** module is loaded.
+ *
+ *
+ * Defines an animation hook that can be later used with
+ * {@link $animate $animate} service and directives that use this service.
+ *
+ * ```js
+ * module.animation('.animation-name', function($inject1, $inject2) {
+ * return {
+ * eventName : function(element, done) {
+ * //code to run the animation
+ * //once complete, then run done()
+ * return function cancellationFunction(element) {
+ * //code to cancel the animation
+ * }
+ * }
+ * }
+ * })
+ * ```
+ *
+ * See {@link ng.$animateProvider#register $animateProvider.register()} and
+ * {@link ngAnimate ngAnimate module} for more information.
+ */
+ animation: invokeLaterAndSetModuleName('$animateProvider', 'register'),
+
+ /**
+ * @ngdoc method
+ * @name angular.Module#filter
+ * @module ng
+ * @param {string} name Filter name - this must be a valid angular expression identifier
+ * @param {Function} filterFactory Factory function for creating new instance of filter.
+ * @description
+ * See {@link ng.$filterProvider#register $filterProvider.register()}.
+ *
+ * >';
+
+ seen.push(val);
+ }
+ return val;
+ });
+}
+
+function toDebugString(obj) {
+ if (typeof obj === 'function') {
+ return obj.toString().replace(/ \{[\s\S]*$/, '');
+ } else if (typeof obj === 'undefined') {
+ return 'undefined';
+ } else if (typeof obj !== 'string') {
+ return serializeObject(obj);
+ }
+ return obj;
+}
+
+/* global angularModule: true,
+ version: true,
+
+ $LocaleProvider,
+ $CompileProvider,
+
+ htmlAnchorDirective,
+ inputDirective,
+ inputDirective,
+ formDirective,
+ scriptDirective,
+ selectDirective,
+ styleDirective,
+ optionDirective,
+ ngBindDirective,
+ ngBindHtmlDirective,
+ ngBindTemplateDirective,
+ ngClassDirective,
+ ngClassEvenDirective,
+ ngClassOddDirective,
+ ngCspDirective,
+ ngCloakDirective,
+ ngControllerDirective,
+ ngFormDirective,
+ ngHideDirective,
+ ngIfDirective,
+ ngIncludeDirective,
+ ngIncludeFillContentDirective,
+ ngInitDirective,
+ ngNonBindableDirective,
+ ngPluralizeDirective,
+ ngRepeatDirective,
+ ngShowDirective,
+ ngStyleDirective,
+ ngSwitchDirective,
+ ngSwitchWhenDirective,
+ ngSwitchDefaultDirective,
+ ngOptionsDirective,
+ ngTranscludeDirective,
+ ngModelDirective,
+ ngListDirective,
+ ngChangeDirective,
+ patternDirective,
+ patternDirective,
+ requiredDirective,
+ requiredDirective,
+ minlengthDirective,
+ minlengthDirective,
+ maxlengthDirective,
+ maxlengthDirective,
+ ngValueDirective,
+ ngModelOptionsDirective,
+ ngAttributeAliasDirectives,
+ ngEventDirectives,
+
+ $AnchorScrollProvider,
+ $AnimateProvider,
+ $$CoreAnimateQueueProvider,
+ $$CoreAnimateRunnerProvider,
+ $BrowserProvider,
+ $CacheFactoryProvider,
+ $ControllerProvider,
+ $DocumentProvider,
+ $ExceptionHandlerProvider,
+ $FilterProvider,
+ $InterpolateProvider,
+ $IntervalProvider,
+ $$HashMapProvider,
+ $HttpProvider,
+ $HttpParamSerializerProvider,
+ $HttpParamSerializerJQLikeProvider,
+ $HttpBackendProvider,
+ $LocationProvider,
+ $LogProvider,
+ $ParseProvider,
+ $RootScopeProvider,
+ $QProvider,
+ $$QProvider,
+ $$SanitizeUriProvider,
+ $SceProvider,
+ $SceDelegateProvider,
+ $SnifferProvider,
+ $TemplateCacheProvider,
+ $TemplateRequestProvider,
+ $$TestabilityProvider,
+ $TimeoutProvider,
+ $$RAFProvider,
+ $WindowProvider,
+ $$jqLiteProvider,
+ $$CookieReaderProvider
+*/
+
+
+/**
+ * @ngdoc object
+ * @name angular.version
+ * @module ng
+ * @description
+ * An object that contains information about the current AngularJS version. This object has the
+ * following properties:
+ *
+ * - `full` – `{string}` – Full version string, such as "0.9.18".
+ * - `major` – `{number}` – Major version number, such as "0".
+ * - `minor` – `{number}` – Minor version number, such as "9".
+ * - `dot` – `{number}` – Dot version number, such as "18".
+ * - `codeName` – `{string}` – Code name of the release, such as "jiggling-armfat".
+ */
+var version = {
+ full: '1.4.3', // all of these placeholder strings will be replaced by grunt's
+ major: 1, // package task
+ minor: 4,
+ dot: 3,
+ codeName: 'foam-acceleration'
+};
+
+
+function publishExternalAPI(angular) {
+ extend(angular, {
+ 'bootstrap': bootstrap,
+ 'copy': copy,
+ 'extend': extend,
+ 'merge': merge,
+ 'equals': equals,
+ 'element': jqLite,
+ 'forEach': forEach,
+ 'injector': createInjector,
+ 'noop': noop,
+ 'bind': bind,
+ 'toJson': toJson,
+ 'fromJson': fromJson,
+ 'identity': identity,
+ 'isUndefined': isUndefined,
+ 'isDefined': isDefined,
+ 'isString': isString,
+ 'isFunction': isFunction,
+ 'isObject': isObject,
+ 'isNumber': isNumber,
+ 'isElement': isElement,
+ 'isArray': isArray,
+ 'version': version,
+ 'isDate': isDate,
+ 'lowercase': lowercase,
+ 'uppercase': uppercase,
+ 'callbacks': {counter: 0},
+ 'getTestability': getTestability,
+ '$$minErr': minErr,
+ '$$csp': csp,
+ 'reloadWithDebugInfo': reloadWithDebugInfo
+ });
+
+ angularModule = setupModuleLoader(window);
+ try {
+ angularModule('ngLocale');
+ } catch (e) {
+ angularModule('ngLocale', []).provider('$locale', $LocaleProvider);
+ }
+
+ angularModule('ng', ['ngLocale'], ['$provide',
+ function ngModule($provide) {
+ // $$sanitizeUriProvider needs to be before $compileProvider as it is used by it.
+ $provide.provider({
+ $$sanitizeUri: $$SanitizeUriProvider
+ });
+ $provide.provider('$compile', $CompileProvider).
+ directive({
+ a: htmlAnchorDirective,
+ input: inputDirective,
+ textarea: inputDirective,
+ form: formDirective,
+ script: scriptDirective,
+ select: selectDirective,
+ style: styleDirective,
+ option: optionDirective,
+ ngBind: ngBindDirective,
+ ngBindHtml: ngBindHtmlDirective,
+ ngBindTemplate: ngBindTemplateDirective,
+ ngClass: ngClassDirective,
+ ngClassEven: ngClassEvenDirective,
+ ngClassOdd: ngClassOddDirective,
+ ngCloak: ngCloakDirective,
+ ngController: ngControllerDirective,
+ ngForm: ngFormDirective,
+ ngHide: ngHideDirective,
+ ngIf: ngIfDirective,
+ ngInclude: ngIncludeDirective,
+ ngInit: ngInitDirective,
+ ngNonBindable: ngNonBindableDirective,
+ ngPluralize: ngPluralizeDirective,
+ ngRepeat: ngRepeatDirective,
+ ngShow: ngShowDirective,
+ ngStyle: ngStyleDirective,
+ ngSwitch: ngSwitchDirective,
+ ngSwitchWhen: ngSwitchWhenDirective,
+ ngSwitchDefault: ngSwitchDefaultDirective,
+ ngOptions: ngOptionsDirective,
+ ngTransclude: ngTranscludeDirective,
+ ngModel: ngModelDirective,
+ ngList: ngListDirective,
+ ngChange: ngChangeDirective,
+ pattern: patternDirective,
+ ngPattern: patternDirective,
+ required: requiredDirective,
+ ngRequired: requiredDirective,
+ minlength: minlengthDirective,
+ ngMinlength: minlengthDirective,
+ maxlength: maxlengthDirective,
+ ngMaxlength: maxlengthDirective,
+ ngValue: ngValueDirective,
+ ngModelOptions: ngModelOptionsDirective
+ }).
+ directive({
+ ngInclude: ngIncludeFillContentDirective
+ }).
+ directive(ngAttributeAliasDirectives).
+ directive(ngEventDirectives);
+ $provide.provider({
+ $anchorScroll: $AnchorScrollProvider,
+ $animate: $AnimateProvider,
+ $$animateQueue: $$CoreAnimateQueueProvider,
+ $$AnimateRunner: $$CoreAnimateRunnerProvider,
+ $browser: $BrowserProvider,
+ $cacheFactory: $CacheFactoryProvider,
+ $controller: $ControllerProvider,
+ $document: $DocumentProvider,
+ $exceptionHandler: $ExceptionHandlerProvider,
+ $filter: $FilterProvider,
+ $interpolate: $InterpolateProvider,
+ $interval: $IntervalProvider,
+ $http: $HttpProvider,
+ $httpParamSerializer: $HttpParamSerializerProvider,
+ $httpParamSerializerJQLike: $HttpParamSerializerJQLikeProvider,
+ $httpBackend: $HttpBackendProvider,
+ $location: $LocationProvider,
+ $log: $LogProvider,
+ $parse: $ParseProvider,
+ $rootScope: $RootScopeProvider,
+ $q: $QProvider,
+ $$q: $$QProvider,
+ $sce: $SceProvider,
+ $sceDelegate: $SceDelegateProvider,
+ $sniffer: $SnifferProvider,
+ $templateCache: $TemplateCacheProvider,
+ $templateRequest: $TemplateRequestProvider,
+ $$testability: $$TestabilityProvider,
+ $timeout: $TimeoutProvider,
+ $window: $WindowProvider,
+ $$rAF: $$RAFProvider,
+ $$jqLite: $$jqLiteProvider,
+ $$HashMap: $$HashMapProvider,
+ $$cookieReader: $$CookieReaderProvider
+ });
+ }
+ ]);
+}
+
+/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
+ * Any commits to this file should be reviewed with security in mind. *
+ * Changes to this file can potentially create security vulnerabilities. *
+ * An approval from 2 Core members with history of modifying *
+ * this file is required. *
+ * *
+ * Does the change somehow allow for arbitrary javascript to be executed? *
+ * Or allows for someone to change the prototype of built-in objects? *
+ * Or gives undesired access to variables likes document or window? *
+ * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
+
+/* global JQLitePrototype: true,
+ addEventListenerFn: true,
+ removeEventListenerFn: true,
+ BOOLEAN_ATTR: true,
+ ALIASED_ATTR: true,
+*/
+
+//////////////////////////////////
+//JQLite
+//////////////////////////////////
+
+/**
+ * @ngdoc function
+ * @name angular.element
+ * @module ng
+ * @kind function
+ *
+ * @description
+ * Wraps a raw DOM element or HTML string as a [jQuery](http://jquery.com) element.
+ *
+ * If jQuery is available, `angular.element` is an alias for the
+ * [jQuery](http://api.jquery.com/jQuery/) function. If jQuery is not available, `angular.element`
+ * delegates to Angular's built-in subset of jQuery, called "jQuery lite" or "jqLite."
+ *
+ * ', '
'],
+ 'col': [2, '
'],
+ 'tr': [2, '', '
'],
+ 'td': [3, '
'],
+ '_default': [0, "", ""]
+};
+
+wrapMap.optgroup = wrapMap.option;
+wrapMap.tbody = wrapMap.tfoot = wrapMap.colgroup = wrapMap.caption = wrapMap.thead;
+wrapMap.th = wrapMap.td;
+
+
+function jqLiteIsTextNode(html) {
+ return !HTML_REGEXP.test(html);
+}
+
+function jqLiteAcceptsData(node) {
+ // The window object can accept data but has no nodeType
+ // Otherwise we are only interested in elements (1) and documents (9)
+ var nodeType = node.nodeType;
+ return nodeType === NODE_TYPE_ELEMENT || !nodeType || nodeType === NODE_TYPE_DOCUMENT;
+}
+
+function jqLiteHasData(node) {
+ for (var key in jqCache[node.ng339]) {
+ return true;
+ }
+ return false;
+}
+
+function jqLiteBuildFragment(html, context) {
+ var tmp, tag, wrap,
+ fragment = context.createDocumentFragment(),
+ nodes = [], i;
+
+ if (jqLiteIsTextNode(html)) {
+ // Convert non-html into a text node
+ nodes.push(context.createTextNode(html));
+ } else {
+ // Convert html into DOM nodes
+ tmp = tmp || fragment.appendChild(context.createElement("div"));
+ tag = (TAG_NAME_REGEXP.exec(html) || ["", ""])[1].toLowerCase();
+ wrap = wrapMap[tag] || wrapMap._default;
+ tmp.innerHTML = wrap[1] + html.replace(XHTML_TAG_REGEXP, "<$1>") + wrap[2];
+
+ // Descend through wrappers to the right content
+ i = wrap[0];
+ while (i--) {
+ tmp = tmp.lastChild;
+ }
+
+ nodes = concat(nodes, tmp.childNodes);
+
+ tmp = fragment.firstChild;
+ tmp.textContent = "";
+ }
+
+ // Remove wrapper from fragment
+ fragment.textContent = "";
+ fragment.innerHTML = ""; // Clear inner HTML
+ forEach(nodes, function(node) {
+ fragment.appendChild(node);
+ });
+
+ return fragment;
+}
+
+function jqLiteParseHTML(html, context) {
+ context = context || document;
+ var parsed;
+
+ if ((parsed = SINGLE_TAG_REGEXP.exec(html))) {
+ return [context.createElement(parsed[1])];
+ }
+
+ if ((parsed = jqLiteBuildFragment(html, context))) {
+ return parsed.childNodes;
+ }
+
+ return [];
+}
+
+/////////////////////////////////////////////
+function JQLite(element) {
+ if (element instanceof JQLite) {
+ return element;
+ }
+
+ var argIsString;
+
+ if (isString(element)) {
+ element = trim(element);
+ argIsString = true;
+ }
+ if (!(this instanceof JQLite)) {
+ if (argIsString && element.charAt(0) != '<') {
+ throw jqLiteMinErr('nosel', 'Looking up elements via selectors is not supported by jqLite! See: http://docs.angularjs.org/api/angular.element');
+ }
+ return new JQLite(element);
+ }
+
+ if (argIsString) {
+ jqLiteAddNodes(this, jqLiteParseHTML(element));
+ } else {
+ jqLiteAddNodes(this, element);
+ }
+}
+
+function jqLiteClone(element) {
+ return element.cloneNode(true);
+}
+
+function jqLiteDealoc(element, onlyDescendants) {
+ if (!onlyDescendants) jqLiteRemoveData(element);
+
+ if (element.querySelectorAll) {
+ var descendants = element.querySelectorAll('*');
+ for (var i = 0, l = descendants.length; i < l; i++) {
+ jqLiteRemoveData(descendants[i]);
+ }
+ }
+}
+
+function jqLiteOff(element, type, fn, unsupported) {
+ if (isDefined(unsupported)) throw jqLiteMinErr('offargs', 'jqLite#off() does not support the `selector` argument');
+
+ var expandoStore = jqLiteExpandoStore(element);
+ var events = expandoStore && expandoStore.events;
+ var handle = expandoStore && expandoStore.handle;
+
+ if (!handle) return; //no listeners registered
+
+ if (!type) {
+ for (type in events) {
+ if (type !== '$destroy') {
+ removeEventListenerFn(element, type, handle);
+ }
+ delete events[type];
+ }
+ } else {
+ forEach(type.split(' '), function(type) {
+ if (isDefined(fn)) {
+ var listenerFns = events[type];
+ arrayRemove(listenerFns || [], fn);
+ if (listenerFns && listenerFns.length > 0) {
+ return;
+ }
+ }
+
+ removeEventListenerFn(element, type, handle);
+ delete events[type];
+ });
+ }
+}
+
+function jqLiteRemoveData(element, name) {
+ var expandoId = element.ng339;
+ var expandoStore = expandoId && jqCache[expandoId];
+
+ if (expandoStore) {
+ if (name) {
+ delete expandoStore.data[name];
+ return;
+ }
+
+ if (expandoStore.handle) {
+ if (expandoStore.events.$destroy) {
+ expandoStore.handle({}, '$destroy');
+ }
+ jqLiteOff(element);
+ }
+ delete jqCache[expandoId];
+ element.ng339 = undefined; // don't delete DOM expandos. IE and Chrome don't like it
+ }
+}
+
+
+function jqLiteExpandoStore(element, createIfNecessary) {
+ var expandoId = element.ng339,
+ expandoStore = expandoId && jqCache[expandoId];
+
+ if (createIfNecessary && !expandoStore) {
+ element.ng339 = expandoId = jqNextId();
+ expandoStore = jqCache[expandoId] = {events: {}, data: {}, handle: undefined};
+ }
+
+ return expandoStore;
+}
+
+
+function jqLiteData(element, key, value) {
+ if (jqLiteAcceptsData(element)) {
+
+ var isSimpleSetter = isDefined(value);
+ var isSimpleGetter = !isSimpleSetter && key && !isObject(key);
+ var massGetter = !key;
+ var expandoStore = jqLiteExpandoStore(element, !isSimpleGetter);
+ var data = expandoStore && expandoStore.data;
+
+ if (isSimpleSetter) { // data('key', value)
+ data[key] = value;
+ } else {
+ if (massGetter) { // data()
+ return data;
+ } else {
+ if (isSimpleGetter) { // data('key')
+ // don't force creation of expandoStore if it doesn't exist yet
+ return data && data[key];
+ } else { // mass-setter: data({key1: val1, key2: val2})
+ extend(data, key);
+ }
+ }
+ }
+ }
+}
+
+function jqLiteHasClass(element, selector) {
+ if (!element.getAttribute) return false;
+ return ((" " + (element.getAttribute('class') || '') + " ").replace(/[\n\t]/g, " ").
+ indexOf(" " + selector + " ") > -1);
+}
+
+function jqLiteRemoveClass(element, cssClasses) {
+ if (cssClasses && element.setAttribute) {
+ forEach(cssClasses.split(' '), function(cssClass) {
+ element.setAttribute('class', trim(
+ (" " + (element.getAttribute('class') || '') + " ")
+ .replace(/[\n\t]/g, " ")
+ .replace(" " + trim(cssClass) + " ", " "))
+ );
+ });
+ }
+}
+
+function jqLiteAddClass(element, cssClasses) {
+ if (cssClasses && element.setAttribute) {
+ var existingClasses = (' ' + (element.getAttribute('class') || '') + ' ')
+ .replace(/[\n\t]/g, " ");
+
+ forEach(cssClasses.split(' '), function(cssClass) {
+ cssClass = trim(cssClass);
+ if (existingClasses.indexOf(' ' + cssClass + ' ') === -1) {
+ existingClasses += cssClass + ' ';
+ }
+ });
+
+ element.setAttribute('class', trim(existingClasses));
+ }
+}
+
+
+function jqLiteAddNodes(root, elements) {
+ // THIS CODE IS VERY HOT. Don't make changes without benchmarking.
+
+ if (elements) {
+
+ // if a Node (the most common case)
+ if (elements.nodeType) {
+ root[root.length++] = elements;
+ } else {
+ var length = elements.length;
+
+ // if an Array or NodeList and not a Window
+ if (typeof length === 'number' && elements.window !== elements) {
+ if (length) {
+ for (var i = 0; i < length; i++) {
+ root[root.length++] = elements[i];
+ }
+ }
+ } else {
+ root[root.length++] = elements;
+ }
+ }
+ }
+}
+
+
+function jqLiteController(element, name) {
+ return jqLiteInheritedData(element, '$' + (name || 'ngController') + 'Controller');
+}
+
+function jqLiteInheritedData(element, name, value) {
+ // if element is the document object work with the html element instead
+ // this makes $(document).scope() possible
+ if (element.nodeType == NODE_TYPE_DOCUMENT) {
+ element = element.documentElement;
+ }
+ var names = isArray(name) ? name : [name];
+
+ while (element) {
+ for (var i = 0, ii = names.length; i < ii; i++) {
+ if ((value = jqLite.data(element, names[i])) !== undefined) return value;
+ }
+
+ // If dealing with a document fragment node with a host element, and no parent, use the host
+ // element as the parent. This enables directives within a Shadow DOM or polyfilled Shadow DOM
+ // to lookup parent controllers.
+ element = element.parentNode || (element.nodeType === NODE_TYPE_DOCUMENT_FRAGMENT && element.host);
+ }
+}
+
+function jqLiteEmpty(element) {
+ jqLiteDealoc(element, true);
+ while (element.firstChild) {
+ element.removeChild(element.firstChild);
+ }
+}
+
+function jqLiteRemove(element, keepData) {
+ if (!keepData) jqLiteDealoc(element);
+ var parent = element.parentNode;
+ if (parent) parent.removeChild(element);
+}
+
+
+function jqLiteDocumentLoaded(action, win) {
+ win = win || window;
+ if (win.document.readyState === 'complete') {
+ // Force the action to be run async for consistent behaviour
+ // from the action's point of view
+ // i.e. it will definitely not be in a $apply
+ win.setTimeout(action);
+ } else {
+ // No need to unbind this handler as load is only ever called once
+ jqLite(win).on('load', action);
+ }
+}
+
+//////////////////////////////////////////
+// Functions which are declared directly.
+//////////////////////////////////////////
+var JQLitePrototype = JQLite.prototype = {
+ ready: function(fn) {
+ var fired = false;
+
+ function trigger() {
+ if (fired) return;
+ fired = true;
+ fn();
+ }
+
+ // check if document is already loaded
+ if (document.readyState === 'complete') {
+ setTimeout(trigger);
+ } else {
+ this.on('DOMContentLoaded', trigger); // works for modern browsers and IE9
+ // we can not use jqLite since we are not done loading and jQuery could be loaded later.
+ // jshint -W064
+ JQLite(window).on('load', trigger); // fallback to window.onload for others
+ // jshint +W064
+ }
+ },
+ toString: function() {
+ var value = [];
+ forEach(this, function(e) { value.push('' + e);});
+ return '[' + value.join(', ') + ']';
+ },
+
+ eq: function(index) {
+ return (index >= 0) ? jqLite(this[index]) : jqLite(this[this.length + index]);
+ },
+
+ length: 0,
+ push: push,
+ sort: [].sort,
+ splice: [].splice
+};
+
+//////////////////////////////////////////
+// Functions iterating getter/setters.
+// these functions return self on setter and
+// value on get.
+//////////////////////////////////////////
+var BOOLEAN_ATTR = {};
+forEach('multiple,selected,checked,disabled,readOnly,required,open'.split(','), function(value) {
+ BOOLEAN_ATTR[lowercase(value)] = value;
+});
+var BOOLEAN_ELEMENTS = {};
+forEach('input,select,option,textarea,button,form,details'.split(','), function(value) {
+ BOOLEAN_ELEMENTS[value] = true;
+});
+var ALIASED_ATTR = {
+ 'ngMinlength': 'minlength',
+ 'ngMaxlength': 'maxlength',
+ 'ngMin': 'min',
+ 'ngMax': 'max',
+ 'ngPattern': 'pattern'
+};
+
+function getBooleanAttrName(element, name) {
+ // check dom last since we will most likely fail on name
+ var booleanAttr = BOOLEAN_ATTR[name.toLowerCase()];
+
+ // booleanAttr is here twice to minimize DOM access
+ return booleanAttr && BOOLEAN_ELEMENTS[nodeName_(element)] && booleanAttr;
+}
+
+function getAliasedAttrName(element, name) {
+ var nodeName = element.nodeName;
+ return (nodeName === 'INPUT' || nodeName === 'TEXTAREA') && ALIASED_ATTR[name];
+}
+
+forEach({
+ data: jqLiteData,
+ removeData: jqLiteRemoveData,
+ hasData: jqLiteHasData
+}, function(fn, name) {
+ JQLite[name] = fn;
+});
+
+forEach({
+ data: jqLiteData,
+ inheritedData: jqLiteInheritedData,
+
+ scope: function(element) {
+ // Can't use jqLiteData here directly so we stay compatible with jQuery!
+ return jqLite.data(element, '$scope') || jqLiteInheritedData(element.parentNode || element, ['$isolateScope', '$scope']);
+ },
+
+ isolateScope: function(element) {
+ // Can't use jqLiteData here directly so we stay compatible with jQuery!
+ return jqLite.data(element, '$isolateScope') || jqLite.data(element, '$isolateScopeNoTemplate');
+ },
+
+ controller: jqLiteController,
+
+ injector: function(element) {
+ return jqLiteInheritedData(element, '$injector');
+ },
+
+ removeAttr: function(element, name) {
+ element.removeAttribute(name);
+ },
+
+ hasClass: jqLiteHasClass,
+
+ css: function(element, name, value) {
+ name = camelCase(name);
+
+ if (isDefined(value)) {
+ element.style[name] = value;
+ } else {
+ return element.style[name];
+ }
+ },
+
+ attr: function(element, name, value) {
+ var nodeType = element.nodeType;
+ if (nodeType === NODE_TYPE_TEXT || nodeType === NODE_TYPE_ATTRIBUTE || nodeType === NODE_TYPE_COMMENT) {
+ return;
+ }
+ var lowercasedName = lowercase(name);
+ if (BOOLEAN_ATTR[lowercasedName]) {
+ if (isDefined(value)) {
+ if (!!value) {
+ element[name] = true;
+ element.setAttribute(name, lowercasedName);
+ } else {
+ element[name] = false;
+ element.removeAttribute(lowercasedName);
+ }
+ } else {
+ return (element[name] ||
+ (element.attributes.getNamedItem(name) || noop).specified)
+ ? lowercasedName
+ : undefined;
+ }
+ } else if (isDefined(value)) {
+ element.setAttribute(name, value);
+ } else if (element.getAttribute) {
+ // the extra argument "2" is to get the right thing for a.href in IE, see jQuery code
+ // some elements (e.g. Document) don't have get attribute, so return undefined
+ var ret = element.getAttribute(name, 2);
+ // normalize non-existing attributes to undefined (as jQuery)
+ return ret === null ? undefined : ret;
+ }
+ },
+
+ prop: function(element, name, value) {
+ if (isDefined(value)) {
+ element[name] = value;
+ } else {
+ return element[name];
+ }
+ },
+
+ text: (function() {
+ getText.$dv = '';
+ return getText;
+
+ function getText(element, value) {
+ if (isUndefined(value)) {
+ var nodeType = element.nodeType;
+ return (nodeType === NODE_TYPE_ELEMENT || nodeType === NODE_TYPE_TEXT) ? element.textContent : '';
+ }
+ element.textContent = value;
+ }
+ })(),
+
+ val: function(element, value) {
+ if (isUndefined(value)) {
+ if (element.multiple && nodeName_(element) === 'select') {
+ var result = [];
+ forEach(element.options, function(option) {
+ if (option.selected) {
+ result.push(option.value || option.text);
+ }
+ });
+ return result.length === 0 ? null : result;
+ }
+ return element.value;
+ }
+ element.value = value;
+ },
+
+ html: function(element, value) {
+ if (isUndefined(value)) {
+ return element.innerHTML;
+ }
+ jqLiteDealoc(element, true);
+ element.innerHTML = value;
+ },
+
+ empty: jqLiteEmpty
+}, function(fn, name) {
+ /**
+ * Properties: writes return selection, reads return first value
+ */
+ JQLite.prototype[name] = function(arg1, arg2) {
+ var i, key;
+ var nodeCount = this.length;
+
+ // jqLiteHasClass has only two arguments, but is a getter-only fn, so we need to special-case it
+ // in a way that survives minification.
+ // jqLiteEmpty takes no arguments but is a setter.
+ if (fn !== jqLiteEmpty &&
+ (((fn.length == 2 && (fn !== jqLiteHasClass && fn !== jqLiteController)) ? arg1 : arg2) === undefined)) {
+ if (isObject(arg1)) {
+
+ // we are a write, but the object properties are the key/values
+ for (i = 0; i < nodeCount; i++) {
+ if (fn === jqLiteData) {
+ // data() takes the whole object in jQuery
+ fn(this[i], arg1);
+ } else {
+ for (key in arg1) {
+ fn(this[i], key, arg1[key]);
+ }
+ }
+ }
+ // return self for chaining
+ return this;
+ } else {
+ // we are a read, so read the first child.
+ // TODO: do we still need this?
+ var value = fn.$dv;
+ // Only if we have $dv do we iterate over all, otherwise it is just the first element.
+ var jj = (value === undefined) ? Math.min(nodeCount, 1) : nodeCount;
+ for (var j = 0; j < jj; j++) {
+ var nodeValue = fn(this[j], arg1, arg2);
+ value = value ? value + nodeValue : nodeValue;
+ }
+ return value;
+ }
+ } else {
+ // we are a write, so apply to all children
+ for (i = 0; i < nodeCount; i++) {
+ fn(this[i], arg1, arg2);
+ }
+ // return self for chaining
+ return this;
+ }
+ };
+});
+
+function createEventHandler(element, events) {
+ var eventHandler = function(event, type) {
+ // jQuery specific api
+ event.isDefaultPrevented = function() {
+ return event.defaultPrevented;
+ };
+
+ var eventFns = events[type || event.type];
+ var eventFnsLength = eventFns ? eventFns.length : 0;
+
+ if (!eventFnsLength) return;
+
+ if (isUndefined(event.immediatePropagationStopped)) {
+ var originalStopImmediatePropagation = event.stopImmediatePropagation;
+ event.stopImmediatePropagation = function() {
+ event.immediatePropagationStopped = true;
+
+ if (event.stopPropagation) {
+ event.stopPropagation();
+ }
+
+ if (originalStopImmediatePropagation) {
+ originalStopImmediatePropagation.call(event);
+ }
+ };
+ }
+
+ event.isImmediatePropagationStopped = function() {
+ return event.immediatePropagationStopped === true;
+ };
+
+ // Copy event handlers in case event handlers array is modified during execution.
+ if ((eventFnsLength > 1)) {
+ eventFns = shallowCopy(eventFns);
+ }
+
+ for (var i = 0; i < eventFnsLength; i++) {
+ if (!event.isImmediatePropagationStopped()) {
+ eventFns[i].call(element, event);
+ }
+ }
+ };
+
+ // TODO: this is a hack for angularMocks/clearDataCache that makes it possible to deregister all
+ // events on `element`
+ eventHandler.elem = element;
+ return eventHandler;
+}
+
+//////////////////////////////////////////
+// Functions iterating traversal.
+// These functions chain results into a single
+// selector.
+//////////////////////////////////////////
+forEach({
+ removeData: jqLiteRemoveData,
+
+ on: function jqLiteOn(element, type, fn, unsupported) {
+ if (isDefined(unsupported)) throw jqLiteMinErr('onargs', 'jqLite#on() does not support the `selector` or `eventData` parameters');
+
+ // Do not add event handlers to non-elements because they will not be cleaned up.
+ if (!jqLiteAcceptsData(element)) {
+ return;
+ }
+
+ var expandoStore = jqLiteExpandoStore(element, true);
+ var events = expandoStore.events;
+ var handle = expandoStore.handle;
+
+ if (!handle) {
+ handle = expandoStore.handle = createEventHandler(element, events);
+ }
+
+ // http://jsperf.com/string-indexof-vs-split
+ var types = type.indexOf(' ') >= 0 ? type.split(' ') : [type];
+ var i = types.length;
+
+ while (i--) {
+ type = types[i];
+ var eventFns = events[type];
+
+ if (!eventFns) {
+ events[type] = [];
+
+ if (type === 'mouseenter' || type === 'mouseleave') {
+ // Refer to jQuery's implementation of mouseenter & mouseleave
+ // Read about mouseenter and mouseleave:
+ // http://www.quirksmode.org/js/events_mouse.html#link8
+
+ jqLiteOn(element, MOUSE_EVENT_MAP[type], function(event) {
+ var target = this, related = event.relatedTarget;
+ // For mousenter/leave call the handler if related is outside the target.
+ // NB: No relatedTarget if the mouse left/entered the browser window
+ if (!related || (related !== target && !target.contains(related))) {
+ handle(event, type);
+ }
+ });
+
+ } else {
+ if (type !== '$destroy') {
+ addEventListenerFn(element, type, handle);
+ }
+ }
+ eventFns = events[type];
+ }
+ eventFns.push(fn);
+ }
+ },
+
+ off: jqLiteOff,
+
+ one: function(element, type, fn) {
+ element = jqLite(element);
+
+ //add the listener twice so that when it is called
+ //you can remove the original function and still be
+ //able to call element.off(ev, fn) normally
+ element.on(type, function onFn() {
+ element.off(type, fn);
+ element.off(type, onFn);
+ });
+ element.on(type, fn);
+ },
+
+ replaceWith: function(element, replaceNode) {
+ var index, parent = element.parentNode;
+ jqLiteDealoc(element);
+ forEach(new JQLite(replaceNode), function(node) {
+ if (index) {
+ parent.insertBefore(node, index.nextSibling);
+ } else {
+ parent.replaceChild(node, element);
+ }
+ index = node;
+ });
+ },
+
+ children: function(element) {
+ var children = [];
+ forEach(element.childNodes, function(element) {
+ if (element.nodeType === NODE_TYPE_ELEMENT) {
+ children.push(element);
+ }
+ });
+ return children;
+ },
+
+ contents: function(element) {
+ return element.contentDocument || element.childNodes || [];
+ },
+
+ append: function(element, node) {
+ var nodeType = element.nodeType;
+ if (nodeType !== NODE_TYPE_ELEMENT && nodeType !== NODE_TYPE_DOCUMENT_FRAGMENT) return;
+
+ node = new JQLite(node);
+
+ for (var i = 0, ii = node.length; i < ii; i++) {
+ var child = node[i];
+ element.appendChild(child);
+ }
+ },
+
+ prepend: function(element, node) {
+ if (element.nodeType === NODE_TYPE_ELEMENT) {
+ var index = element.firstChild;
+ forEach(new JQLite(node), function(child) {
+ element.insertBefore(child, index);
+ });
+ }
+ },
+
+ wrap: function(element, wrapNode) {
+ wrapNode = jqLite(wrapNode).eq(0).clone()[0];
+ var parent = element.parentNode;
+ if (parent) {
+ parent.replaceChild(wrapNode, element);
+ }
+ wrapNode.appendChild(element);
+ },
+
+ remove: jqLiteRemove,
+
+ detach: function(element) {
+ jqLiteRemove(element, true);
+ },
+
+ after: function(element, newElement) {
+ var index = element, parent = element.parentNode;
+ newElement = new JQLite(newElement);
+
+ for (var i = 0, ii = newElement.length; i < ii; i++) {
+ var node = newElement[i];
+ parent.insertBefore(node, index.nextSibling);
+ index = node;
+ }
+ },
+
+ addClass: jqLiteAddClass,
+ removeClass: jqLiteRemoveClass,
+
+ toggleClass: function(element, selector, condition) {
+ if (selector) {
+ forEach(selector.split(' '), function(className) {
+ var classCondition = condition;
+ if (isUndefined(classCondition)) {
+ classCondition = !jqLiteHasClass(element, className);
+ }
+ (classCondition ? jqLiteAddClass : jqLiteRemoveClass)(element, className);
+ });
+ }
+ },
+
+ parent: function(element) {
+ var parent = element.parentNode;
+ return parent && parent.nodeType !== NODE_TYPE_DOCUMENT_FRAGMENT ? parent : null;
+ },
+
+ next: function(element) {
+ return element.nextElementSibling;
+ },
+
+ find: function(element, selector) {
+ if (element.getElementsByTagName) {
+ return element.getElementsByTagName(selector);
+ } else {
+ return [];
+ }
+ },
+
+ clone: jqLiteClone,
+
+ triggerHandler: function(element, event, extraParameters) {
+
+ var dummyEvent, eventFnsCopy, handlerArgs;
+ var eventName = event.type || event;
+ var expandoStore = jqLiteExpandoStore(element);
+ var events = expandoStore && expandoStore.events;
+ var eventFns = events && events[eventName];
+
+ if (eventFns) {
+ // Create a dummy event to pass to the handlers
+ dummyEvent = {
+ preventDefault: function() { this.defaultPrevented = true; },
+ isDefaultPrevented: function() { return this.defaultPrevented === true; },
+ stopImmediatePropagation: function() { this.immediatePropagationStopped = true; },
+ isImmediatePropagationStopped: function() { return this.immediatePropagationStopped === true; },
+ stopPropagation: noop,
+ type: eventName,
+ target: element
+ };
+
+ // If a custom event was provided then extend our dummy event with it
+ if (event.type) {
+ dummyEvent = extend(dummyEvent, event);
+ }
+
+ // Copy event handlers in case event handlers array is modified during execution.
+ eventFnsCopy = shallowCopy(eventFns);
+ handlerArgs = extraParameters ? [dummyEvent].concat(extraParameters) : [dummyEvent];
+
+ forEach(eventFnsCopy, function(fn) {
+ if (!dummyEvent.isImmediatePropagationStopped()) {
+ fn.apply(element, handlerArgs);
+ }
+ });
+ }
+ }
+}, function(fn, name) {
+ /**
+ * chaining functions
+ */
+ JQLite.prototype[name] = function(arg1, arg2, arg3) {
+ var value;
+
+ for (var i = 0, ii = this.length; i < ii; i++) {
+ if (isUndefined(value)) {
+ value = fn(this[i], arg1, arg2, arg3);
+ if (isDefined(value)) {
+ // any function which returns a value needs to be wrapped
+ value = jqLite(value);
+ }
+ } else {
+ jqLiteAddNodes(value, fn(this[i], arg1, arg2, arg3));
+ }
+ }
+ return isDefined(value) ? value : this;
+ };
+
+ // bind legacy bind/unbind to on/off
+ JQLite.prototype.bind = JQLite.prototype.on;
+ JQLite.prototype.unbind = JQLite.prototype.off;
+});
+
+
+// Provider for private $$jqLite service
+function $$jqLiteProvider() {
+ this.$get = function $$jqLite() {
+ return extend(JQLite, {
+ hasClass: function(node, classes) {
+ if (node.attr) node = node[0];
+ return jqLiteHasClass(node, classes);
+ },
+ addClass: function(node, classes) {
+ if (node.attr) node = node[0];
+ return jqLiteAddClass(node, classes);
+ },
+ removeClass: function(node, classes) {
+ if (node.attr) node = node[0];
+ return jqLiteRemoveClass(node, classes);
+ }
+ });
+ };
+}
+
+/**
+ * Computes a hash of an 'obj'.
+ * Hash of a:
+ * string is string
+ * number is number as string
+ * object is either result of calling $$hashKey function on the object or uniquely generated id,
+ * that is also assigned to the $$hashKey property of the object.
+ *
+ * @param obj
+ * @returns {string} hash string such that the same input will have the same hash string.
+ * The resulting string key is in 'type:hashKey' format.
+ */
+function hashKey(obj, nextUidFn) {
+ var key = obj && obj.$$hashKey;
+
+ if (key) {
+ if (typeof key === 'function') {
+ key = obj.$$hashKey();
+ }
+ return key;
+ }
+
+ var objType = typeof obj;
+ if (objType == 'function' || (objType == 'object' && obj !== null)) {
+ key = obj.$$hashKey = objType + ':' + (nextUidFn || nextUid)();
+ } else {
+ key = objType + ':' + obj;
+ }
+
+ return key;
+}
+
+/**
+ * HashMap which can use objects as keys
+ */
+function HashMap(array, isolatedUid) {
+ if (isolatedUid) {
+ var uid = 0;
+ this.nextUid = function() {
+ return ++uid;
+ };
+ }
+ forEach(array, this.put, this);
+}
+HashMap.prototype = {
+ /**
+ * Store key value pair
+ * @param key key to store can be any type
+ * @param value value to store can be any type
+ */
+ put: function(key, value) {
+ this[hashKey(key, this.nextUid)] = value;
+ },
+
+ /**
+ * @param key
+ * @returns {Object} the value for the key
+ */
+ get: function(key) {
+ return this[hashKey(key, this.nextUid)];
+ },
+
+ /**
+ * Remove the key/value pair
+ * @param key
+ */
+ remove: function(key) {
+ var value = this[key = hashKey(key, this.nextUid)];
+ delete this[key];
+ return value;
+ }
+};
+
+var $$HashMapProvider = [function() {
+ this.$get = [function() {
+ return HashMap;
+ }];
+}];
+
+/**
+ * @ngdoc function
+ * @module ng
+ * @name angular.injector
+ * @kind function
+ *
+ * @description
+ * Creates an injector object that can be used for retrieving services as well as for
+ * dependency injection (see {@link guide/di dependency injection}).
+ *
+ * @param {Array.} modules A list of module functions or their aliases. See
+ * {@link angular.module}. The `ng` module must be explicitly added.
+ * @param {boolean=} [strictDi=false] Whether the injector should be in strict mode, which
+ * disallows argument name annotation inference.
+ * @returns {injector} Injector object. See {@link auto.$injector $injector}.
+ *
+ * @example
+ * Typical usage
+ * ```js
+ * // create an injector
+ * var $injector = angular.injector(['ng']);
+ *
+ * // use the injector to kick off your application
+ * // use the type inference to auto inject arguments, or use implicit injection
+ * $injector.invoke(function($rootScope, $compile, $document) {
+ * $compile($document)($rootScope);
+ * $rootScope.$digest();
+ * });
+ * ```
+ *
+ * Sometimes you want to get access to the injector of a currently running Angular app
+ * from outside Angular. Perhaps, you want to inject and compile some markup after the
+ * application has been bootstrapped. You can do this using the extra `injector()` added
+ * to JQuery/jqLite elements. See {@link angular.element}.
+ *
+ * *This is fairly rare but could be the case if a third party library is injecting the
+ * markup.*
+ *
+ * In the following example a new block of HTML containing a `ng-controller`
+ * directive is added to the end of the document body by JQuery. We then compile and link
+ * it into the current AngularJS scope.
+ *
+ * ```js
+ * var $div = $('} fn The injectable function to invoke. Function parameters are
+ * injected according to the {@link guide/di $inject Annotation} rules.
+ * @param {Object=} self The `this` for the invoked method.
+ * @param {Object=} locals Optional object. If preset then any argument names are read from this
+ * object first, before the `$injector` is consulted.
+ * @returns {*} the value returned by the invoked `fn` function.
+ */
+
+/**
+ * @ngdoc method
+ * @name $injector#has
+ *
+ * @description
+ * Allows the user to query if the particular service exists.
+ *
+ * @param {string} name Name of the service to query.
+ * @returns {boolean} `true` if injector has given service.
+ */
+
+/**
+ * @ngdoc method
+ * @name $injector#instantiate
+ * @description
+ * Create a new instance of JS type. The method takes a constructor function, invokes the new
+ * operator, and supplies all of the arguments to the constructor function as specified by the
+ * constructor annotation.
+ *
+ * @param {Function} Type Annotated constructor function.
+ * @param {Object=} locals Optional object. If preset then any argument names are read from this
+ * object first, before the `$injector` is consulted.
+ * @returns {Object} new instance of `Type`.
+ */
+
+/**
+ * @ngdoc method
+ * @name $injector#annotate
+ *
+ * @description
+ * Returns an array of service names which the function is requesting for injection. This API is
+ * used by the injector to determine which services need to be injected into the function when the
+ * function is invoked. There are three ways in which the function can be annotated with the needed
+ * dependencies.
+ *
+ * # Argument names
+ *
+ * The simplest form is to extract the dependencies from the arguments of the function. This is done
+ * by converting the function into a string using `toString()` method and extracting the argument
+ * names.
+ * ```js
+ * // Given
+ * function MyController($scope, $route) {
+ * // ...
+ * }
+ *
+ * // Then
+ * expect(injector.annotate(MyController)).toEqual(['$scope', '$route']);
+ * ```
+ *
+ * You can disallow this method by using strict injection mode.
+ *
+ * This method does not work with code minification / obfuscation. For this reason the following
+ * annotation strategies are supported.
+ *
+ * # The `$inject` property
+ *
+ * If a function has an `$inject` property and its value is an array of strings, then the strings
+ * represent names of services to be injected into the function.
+ * ```js
+ * // Given
+ * var MyController = function(obfuscatedScope, obfuscatedRoute) {
+ * // ...
+ * }
+ * // Define function dependencies
+ * MyController['$inject'] = ['$scope', '$route'];
+ *
+ * // Then
+ * expect(injector.annotate(MyController)).toEqual(['$scope', '$route']);
+ * ```
+ *
+ * # The array notation
+ *
+ * It is often desirable to inline Injected functions and that's when setting the `$inject` property
+ * is very inconvenient. In these situations using the array notation to specify the dependencies in
+ * a way that survives minification is a better choice:
+ *
+ * ```js
+ * // We wish to write this (not minification / obfuscation safe)
+ * injector.invoke(function($compile, $rootScope) {
+ * // ...
+ * });
+ *
+ * // We are forced to write break inlining
+ * var tmpFn = function(obfuscatedCompile, obfuscatedRootScope) {
+ * // ...
+ * };
+ * tmpFn.$inject = ['$compile', '$rootScope'];
+ * injector.invoke(tmpFn);
+ *
+ * // To better support inline function the inline annotation is supported
+ * injector.invoke(['$compile', '$rootScope', function(obfCompile, obfRootScope) {
+ * // ...
+ * }]);
+ *
+ * // Therefore
+ * expect(injector.annotate(
+ * ['$compile', '$rootScope', function(obfus_$compile, obfus_$rootScope) {}])
+ * ).toEqual(['$compile', '$rootScope']);
+ * ```
+ *
+ * @param {Function|Array.} fn Function for which dependent service names need to
+ * be retrieved as described above.
+ *
+ * @param {boolean=} [strictDi=false] Disallow argument name annotation inference.
+ *
+ * @returns {Array.} The names of the services which the function requires.
+ */
+
+
+
+
+/**
+ * @ngdoc service
+ * @name $provide
+ *
+ * @description
+ *
+ * The {@link auto.$provide $provide} service has a number of methods for registering components
+ * with the {@link auto.$injector $injector}. Many of these functions are also exposed on
+ * {@link angular.Module}.
+ *
+ * An Angular **service** is a singleton object created by a **service factory**. These **service
+ * factories** are functions which, in turn, are created by a **service provider**.
+ * The **service providers** are constructor functions. When instantiated they must contain a
+ * property called `$get`, which holds the **service factory** function.
+ *
+ * When you request a service, the {@link auto.$injector $injector} is responsible for finding the
+ * correct **service provider**, instantiating it and then calling its `$get` **service factory**
+ * function to get the instance of the **service**.
+ *
+ * Often services have no configuration options and there is no need to add methods to the service
+ * provider. The provider will be no more than a constructor function with a `$get` property. For
+ * these cases the {@link auto.$provide $provide} service has additional helper methods to register
+ * services without specifying a provider.
+ *
+ * * {@link auto.$provide#provider provider(provider)} - registers a **service provider** with the
+ * {@link auto.$injector $injector}
+ * * {@link auto.$provide#constant constant(obj)} - registers a value/object that can be accessed by
+ * providers and services.
+ * * {@link auto.$provide#value value(obj)} - registers a value/object that can only be accessed by
+ * services, not providers.
+ * * {@link auto.$provide#factory factory(fn)} - registers a service **factory function**, `fn`,
+ * that will be wrapped in a **service provider** object, whose `$get` property will contain the
+ * given factory function.
+ * * {@link auto.$provide#service service(class)} - registers a **constructor function**, `class`
+ * that will be wrapped in a **service provider** object, whose `$get` property will instantiate
+ * a new object using the given constructor function.
+ *
+ * See the individual methods for more information and examples.
+ */
+
+/**
+ * @ngdoc method
+ * @name $provide#provider
+ * @description
+ *
+ * Register a **provider function** with the {@link auto.$injector $injector}. Provider functions
+ * are constructor functions, whose instances are responsible for "providing" a factory for a
+ * service.
+ *
+ * Service provider names start with the name of the service they provide followed by `Provider`.
+ * For example, the {@link ng.$log $log} service has a provider called
+ * {@link ng.$logProvider $logProvider}.
+ *
+ * Service provider objects can have additional methods which allow configuration of the provider
+ * and its service. Importantly, you can configure what kind of service is created by the `$get`
+ * method, or how that service will act. For example, the {@link ng.$logProvider $logProvider} has a
+ * method {@link ng.$logProvider#debugEnabled debugEnabled}
+ * which lets you specify whether the {@link ng.$log $log} service will log debug messages to the
+ * console or not.
+ *
+ * @param {string} name The name of the instance. NOTE: the provider will be available under `name +
+ 'Provider'` key.
+ * @param {(Object|function())} provider If the provider is:
+ *
+ * - `Object`: then it should have a `$get` method. The `$get` method will be invoked using
+ * {@link auto.$injector#invoke $injector.invoke()} when an instance needs to be created.
+ * - `Constructor`: a new instance of the provider will be created using
+ * {@link auto.$injector#instantiate $injector.instantiate()}, then treated as `object`.
+ *
+ * @returns {Object} registered provider instance
+
+ * @example
+ *
+ * The following example shows how to create a simple event tracking service and register it using
+ * {@link auto.$provide#provider $provide.provider()}.
+ *
+ * ```js
+ * // Define the eventTracker provider
+ * function EventTrackerProvider() {
+ * var trackingUrl = '/track';
+ *
+ * // A provider method for configuring where the tracked events should been saved
+ * this.setTrackingUrl = function(url) {
+ * trackingUrl = url;
+ * };
+ *
+ * // The service factory function
+ * this.$get = ['$http', function($http) {
+ * var trackedEvents = {};
+ * return {
+ * // Call this to track an event
+ * event: function(event) {
+ * var count = trackedEvents[event] || 0;
+ * count += 1;
+ * trackedEvents[event] = count;
+ * return count;
+ * },
+ * // Call this to save the tracked events to the trackingUrl
+ * save: function() {
+ * $http.post(trackingUrl, trackedEvents);
+ * }
+ * };
+ * }];
+ * }
+ *
+ * describe('eventTracker', function() {
+ * var postSpy;
+ *
+ * beforeEach(module(function($provide) {
+ * // Register the eventTracker provider
+ * $provide.provider('eventTracker', EventTrackerProvider);
+ * }));
+ *
+ * beforeEach(module(function(eventTrackerProvider) {
+ * // Configure eventTracker provider
+ * eventTrackerProvider.setTrackingUrl('/custom-track');
+ * }));
+ *
+ * it('tracks events', inject(function(eventTracker) {
+ * expect(eventTracker.event('login')).toEqual(1);
+ * expect(eventTracker.event('login')).toEqual(2);
+ * }));
+ *
+ * it('saves to the tracking url', inject(function(eventTracker, $http) {
+ * postSpy = spyOn($http, 'post');
+ * eventTracker.event('login');
+ * eventTracker.save();
+ * expect(postSpy).toHaveBeenCalled();
+ * expect(postSpy.mostRecentCall.args[0]).not.toEqual('/track');
+ * expect(postSpy.mostRecentCall.args[0]).toEqual('/custom-track');
+ * expect(postSpy.mostRecentCall.args[1]).toEqual({ 'login': 1 });
+ * }));
+ * });
+ * ```
+ */
+
+/**
+ * @ngdoc method
+ * @name $provide#factory
+ * @description
+ *
+ * Register a **service factory**, which will be called to return the service instance.
+ * This is short for registering a service where its provider consists of only a `$get` property,
+ * which is the given service factory function.
+ * You should use {@link auto.$provide#factory $provide.factory(getFn)} if you do not need to
+ * configure your service in a provider.
+ *
+ * @param {string} name The name of the instance.
+ * @param {Function|Array.} $getFn The injectable $getFn for the instance creation.
+ * Internally this is a short hand for `$provide.provider(name, {$get: $getFn})`.
+ * @returns {Object} registered provider instance
+ *
+ * @example
+ * Here is an example of registering a service
+ * ```js
+ * $provide.factory('ping', ['$http', function($http) {
+ * return function ping() {
+ * return $http.send('/ping');
+ * };
+ * }]);
+ * ```
+ * You would then inject and use this service like this:
+ * ```js
+ * someModule.controller('Ctrl', ['ping', function(ping) {
+ * ping();
+ * }]);
+ * ```
+ */
+
+
+/**
+ * @ngdoc method
+ * @name $provide#service
+ * @description
+ *
+ * Register a **service constructor**, which will be invoked with `new` to create the service
+ * instance.
+ * This is short for registering a service where its provider's `$get` property is the service
+ * constructor function that will be used to instantiate the service instance.
+ *
+ * You should use {@link auto.$provide#service $provide.service(class)} if you define your service
+ * as a type/class.
+ *
+ * @param {string} name The name of the instance.
+ * @param {Function|Array.} constructor An injectable class (constructor function)
+ * that will be instantiated.
+ * @returns {Object} registered provider instance
+ *
+ * @example
+ * Here is an example of registering a service using
+ * {@link auto.$provide#service $provide.service(class)}.
+ * ```js
+ * var Ping = function($http) {
+ * this.$http = $http;
+ * };
+ *
+ * Ping.$inject = ['$http'];
+ *
+ * Ping.prototype.send = function() {
+ * return this.$http.get('/ping');
+ * };
+ * $provide.service('ping', Ping);
+ * ```
+ * You would then inject and use this service like this:
+ * ```js
+ * someModule.controller('Ctrl', ['ping', function(ping) {
+ * ping.send();
+ * }]);
+ * ```
+ */
+
+
+/**
+ * @ngdoc method
+ * @name $provide#value
+ * @description
+ *
+ * Register a **value service** with the {@link auto.$injector $injector}, such as a string, a
+ * number, an array, an object or a function. This is short for registering a service where its
+ * provider's `$get` property is a factory function that takes no arguments and returns the **value
+ * service**.
+ *
+ * Value services are similar to constant services, except that they cannot be injected into a
+ * module configuration function (see {@link angular.Module#config}) but they can be overridden by
+ * an Angular
+ * {@link auto.$provide#decorator decorator}.
+ *
+ * @param {string} name The name of the instance.
+ * @param {*} value The value.
+ * @returns {Object} registered provider instance
+ *
+ * @example
+ * Here are some examples of creating value services.
+ * ```js
+ * $provide.value('ADMIN_USER', 'admin');
+ *
+ * $provide.value('RoleLookup', { admin: 0, writer: 1, reader: 2 });
+ *
+ * $provide.value('halfOf', function(value) {
+ * return value / 2;
+ * });
+ * ```
+ */
+
+
+/**
+ * @ngdoc method
+ * @name $provide#constant
+ * @description
+ *
+ * Register a **constant service**, such as a string, a number, an array, an object or a function,
+ * with the {@link auto.$injector $injector}. Unlike {@link auto.$provide#value value} it can be
+ * injected into a module configuration function (see {@link angular.Module#config}) and it cannot
+ * be overridden by an Angular {@link auto.$provide#decorator decorator}.
+ *
+ * @param {string} name The name of the constant.
+ * @param {*} value The constant value.
+ * @returns {Object} registered instance
+ *
+ * @example
+ * Here a some examples of creating constants:
+ * ```js
+ * $provide.constant('SHARD_HEIGHT', 306);
+ *
+ * $provide.constant('MY_COLOURS', ['red', 'blue', 'grey']);
+ *
+ * $provide.constant('double', function(value) {
+ * return value * 2;
+ * });
+ * ```
+ */
+
+
+/**
+ * @ngdoc method
+ * @name $provide#decorator
+ * @description
+ *
+ * Register a **service decorator** with the {@link auto.$injector $injector}. A service decorator
+ * intercepts the creation of a service, allowing it to override or modify the behaviour of the
+ * service. The object returned by the decorator may be the original service, or a new service
+ * object which replaces or wraps and delegates to the original service.
+ *
+ * @param {string} name The name of the service to decorate.
+ * @param {Function|Array.} decorator This function will be invoked when the service needs to be
+ * instantiated and should return the decorated service instance. The function is called using
+ * the {@link auto.$injector#invoke injector.invoke} method and is therefore fully injectable.
+ * Local injection arguments:
+ *
+ * * `$delegate` - The original service instance, which can be monkey patched, configured,
+ * decorated or delegated to.
+ *
+ * @example
+ * Here we decorate the {@link ng.$log $log} service to convert warnings to errors by intercepting
+ * calls to {@link ng.$log#error $log.warn()}.
+ * ```js
+ * $provide.decorator('$log', ['$delegate', function($delegate) {
+ * $delegate.warn = $delegate.error;
+ * return $delegate;
+ * }]);
+ * ```
+ */
+
+
+function createInjector(modulesToLoad, strictDi) {
+ strictDi = (strictDi === true);
+ var INSTANTIATING = {},
+ providerSuffix = 'Provider',
+ path = [],
+ loadedModules = new HashMap([], true),
+ providerCache = {
+ $provide: {
+ provider: supportObject(provider),
+ factory: supportObject(factory),
+ service: supportObject(service),
+ value: supportObject(value),
+ constant: supportObject(constant),
+ decorator: decorator
+ }
+ },
+ providerInjector = (providerCache.$injector =
+ createInternalInjector(providerCache, function(serviceName, caller) {
+ if (angular.isString(caller)) {
+ path.push(caller);
+ }
+ throw $injectorMinErr('unpr', "Unknown provider: {0}", path.join(' <- '));
+ })),
+ instanceCache = {},
+ instanceInjector = (instanceCache.$injector =
+ createInternalInjector(instanceCache, function(serviceName, caller) {
+ var provider = providerInjector.get(serviceName + providerSuffix, caller);
+ return instanceInjector.invoke(provider.$get, provider, undefined, serviceName);
+ }));
+
+
+ forEach(loadModules(modulesToLoad), function(fn) { if (fn) instanceInjector.invoke(fn); });
+
+ return instanceInjector;
+
+ ////////////////////////////////////
+ // $provider
+ ////////////////////////////////////
+
+ function supportObject(delegate) {
+ return function(key, value) {
+ if (isObject(key)) {
+ forEach(key, reverseParams(delegate));
+ } else {
+ return delegate(key, value);
+ }
+ };
+ }
+
+ function provider(name, provider_) {
+ assertNotHasOwnProperty(name, 'service');
+ if (isFunction(provider_) || isArray(provider_)) {
+ provider_ = providerInjector.instantiate(provider_);
+ }
+ if (!provider_.$get) {
+ throw $injectorMinErr('pget', "Provider '{0}' must define $get factory method.", name);
+ }
+ return providerCache[name + providerSuffix] = provider_;
+ }
+
+ function enforceReturnValue(name, factory) {
+ return function enforcedReturnValue() {
+ var result = instanceInjector.invoke(factory, this);
+ if (isUndefined(result)) {
+ throw $injectorMinErr('undef', "Provider '{0}' must return a value from $get factory method.", name);
+ }
+ return result;
+ };
+ }
+
+ function factory(name, factoryFn, enforce) {
+ return provider(name, {
+ $get: enforce !== false ? enforceReturnValue(name, factoryFn) : factoryFn
+ });
+ }
+
+ function service(name, constructor) {
+ return factory(name, ['$injector', function($injector) {
+ return $injector.instantiate(constructor);
+ }]);
+ }
+
+ function value(name, val) { return factory(name, valueFn(val), false); }
+
+ function constant(name, value) {
+ assertNotHasOwnProperty(name, 'constant');
+ providerCache[name] = value;
+ instanceCache[name] = value;
+ }
+
+ function decorator(serviceName, decorFn) {
+ var origProvider = providerInjector.get(serviceName + providerSuffix),
+ orig$get = origProvider.$get;
+
+ origProvider.$get = function() {
+ var origInstance = instanceInjector.invoke(orig$get, origProvider);
+ return instanceInjector.invoke(decorFn, null, {$delegate: origInstance});
+ };
+ }
+
+ ////////////////////////////////////
+ // Module Loading
+ ////////////////////////////////////
+ function loadModules(modulesToLoad) {
+ var runBlocks = [], moduleFn;
+ forEach(modulesToLoad, function(module) {
+ if (loadedModules.get(module)) return;
+ loadedModules.put(module, true);
+
+ function runInvokeQueue(queue) {
+ var i, ii;
+ for (i = 0, ii = queue.length; i < ii; i++) {
+ var invokeArgs = queue[i],
+ provider = providerInjector.get(invokeArgs[0]);
+
+ provider[invokeArgs[1]].apply(provider, invokeArgs[2]);
+ }
+ }
+
+ try {
+ if (isString(module)) {
+ moduleFn = angularModule(module);
+ runBlocks = runBlocks.concat(loadModules(moduleFn.requires)).concat(moduleFn._runBlocks);
+ runInvokeQueue(moduleFn._invokeQueue);
+ runInvokeQueue(moduleFn._configBlocks);
+ } else if (isFunction(module)) {
+ runBlocks.push(providerInjector.invoke(module));
+ } else if (isArray(module)) {
+ runBlocks.push(providerInjector.invoke(module));
+ } else {
+ assertArgFn(module, 'module');
+ }
+ } catch (e) {
+ if (isArray(module)) {
+ module = module[module.length - 1];
+ }
+ if (e.message && e.stack && e.stack.indexOf(e.message) == -1) {
+ // Safari & FF's stack traces don't contain error.message content
+ // unlike those of Chrome and IE
+ // So if stack doesn't contain message, we create a new string that contains both.
+ // Since error.stack is read-only in Safari, I'm overriding e and not e.stack here.
+ /* jshint -W022 */
+ e = e.message + '\n' + e.stack;
+ }
+ throw $injectorMinErr('modulerr', "Failed to instantiate module {0} due to:\n{1}",
+ module, e.stack || e.message || e);
+ }
+ });
+ return runBlocks;
+ }
+
+ ////////////////////////////////////
+ // internal Injector
+ ////////////////////////////////////
+
+ function createInternalInjector(cache, factory) {
+
+ function getService(serviceName, caller) {
+ if (cache.hasOwnProperty(serviceName)) {
+ if (cache[serviceName] === INSTANTIATING) {
+ throw $injectorMinErr('cdep', 'Circular dependency found: {0}',
+ serviceName + ' <- ' + path.join(' <- '));
+ }
+ return cache[serviceName];
+ } else {
+ try {
+ path.unshift(serviceName);
+ cache[serviceName] = INSTANTIATING;
+ return cache[serviceName] = factory(serviceName, caller);
+ } catch (err) {
+ if (cache[serviceName] === INSTANTIATING) {
+ delete cache[serviceName];
+ }
+ throw err;
+ } finally {
+ path.shift();
+ }
+ }
+ }
+
+ function invoke(fn, self, locals, serviceName) {
+ if (typeof locals === 'string') {
+ serviceName = locals;
+ locals = null;
+ }
+
+ var args = [],
+ $inject = createInjector.$$annotate(fn, strictDi, serviceName),
+ length, i,
+ key;
+
+ for (i = 0, length = $inject.length; i < length; i++) {
+ key = $inject[i];
+ if (typeof key !== 'string') {
+ throw $injectorMinErr('itkn',
+ 'Incorrect injection token! Expected service name as string, got {0}', key);
+ }
+ args.push(
+ locals && locals.hasOwnProperty(key)
+ ? locals[key]
+ : getService(key, serviceName)
+ );
+ }
+ if (isArray(fn)) {
+ fn = fn[length];
+ }
+
+ // http://jsperf.com/angularjs-invoke-apply-vs-switch
+ // #5388
+ return fn.apply(self, args);
+ }
+
+ function instantiate(Type, locals, serviceName) {
+ // Check if Type is annotated and use just the given function at n-1 as parameter
+ // e.g. someModule.factory('greeter', ['$window', function(renamed$window) {}]);
+ // Object creation: http://jsperf.com/create-constructor/2
+ var instance = Object.create((isArray(Type) ? Type[Type.length - 1] : Type).prototype || null);
+ var returnedValue = invoke(Type, instance, locals, serviceName);
+
+ return isObject(returnedValue) || isFunction(returnedValue) ? returnedValue : instance;
+ }
+
+ return {
+ invoke: invoke,
+ instantiate: instantiate,
+ get: getService,
+ annotate: createInjector.$$annotate,
+ has: function(name) {
+ return providerCache.hasOwnProperty(name + providerSuffix) || cache.hasOwnProperty(name);
+ }
+ };
+ }
+}
+
+createInjector.$$annotate = annotate;
+
+/**
+ * @ngdoc provider
+ * @name $anchorScrollProvider
+ *
+ * @description
+ * Use `$anchorScrollProvider` to disable automatic scrolling whenever
+ * {@link ng.$location#hash $location.hash()} changes.
+ */
+function $AnchorScrollProvider() {
+
+ var autoScrollingEnabled = true;
+
+ /**
+ * @ngdoc method
+ * @name $anchorScrollProvider#disableAutoScrolling
+ *
+ * @description
+ * By default, {@link ng.$anchorScroll $anchorScroll()} will automatically detect changes to
+ * {@link ng.$location#hash $location.hash()} and scroll to the element matching the new hash.
+ * Use this method to disable automatic scrolling. + * + * If automatic scrolling is disabled, one must explicitly call + * {@link ng.$anchorScroll $anchorScroll()} in order to scroll to the element related to the + * current hash. + */ + this.disableAutoScrolling = function() { + autoScrollingEnabled = false; + }; + + /** + * @ngdoc service + * @name $anchorScroll + * @kind function + * @requires $window + * @requires $location + * @requires $rootScope + * + * @description + * When called, it scrolls to the element related to the specified `hash` or (if omitted) to the + * current value of {@link ng.$location#hash $location.hash()}, according to the rules specified + * in the + * [HTML5 spec](http://dev.w3.org/html5/spec/Overview.html#the-indicated-part-of-the-document). + * + * It also watches the {@link ng.$location#hash $location.hash()} and automatically scrolls to + * match any anchor whenever it changes. This can be disabled by calling + * {@link ng.$anchorScrollProvider#disableAutoScrolling $anchorScrollProvider.disableAutoScrolling()}. + * + * Additionally, you can use its {@link ng.$anchorScroll#yOffset yOffset} property to specify a + * vertical scroll-offset (either fixed or dynamic). + * + * @param {string=} hash The hash specifying the element to scroll to. If omitted, the value of + * {@link ng.$location#hash $location.hash()} will be used. + * + * @property {(number|function|jqLite)} yOffset + * If set, specifies a vertical scroll-offset. This is often useful when there are fixed + * positioned elements at the top of the page, such as navbars, headers etc. + * + * `yOffset` can be specified in various ways: + * - **number**: A fixed number of pixels to be used as offset.
+ * - **function**: A getter function called everytime `$anchorScroll()` is executed. Must return + * a number representing the offset (in pixels).
+ * - **jqLite**: A jqLite/jQuery element to be used for specifying the offset. The distance from + * the top of the page to the element's bottom will be used as offset.
+ * **Note**: The element will be taken into account only as long as its `position` is set to + * `fixed`. This option is useful, when dealing with responsive navbars/headers that adjust + * their height and/or positioning according to the viewport's size. + * + *
+ *
+
+
+
+ angular.module('anchorScrollExample', [])
+ .controller('ScrollController', ['$scope', '$location', '$anchorScroll',
+ function ($scope, $location, $anchorScroll) {
+ $scope.gotoBottom = function() {
+ // set the location.hash to the id of
+ // the element you wish to scroll to.
+ $location.hash('bottom');
+
+ // call $anchorScroll()
+ $anchorScroll();
+ };
+ }]);
+
+
+ #scrollArea {
+ height: 280px;
+ overflow: auto;
+ }
+
+ #bottom {
+ display: block;
+ margin-top: 2000px;
+ }
+
+
+ *
+ *
+ * The example below illustrates the use of a vertical scroll-offset (specified as a fixed value). + * See {@link ng.$anchorScroll#yOffset $anchorScroll.yOffset} for more details. + * + * @example +
+
+
+
+
+ angular.module('anchorScrollOffsetExample', [])
+ .run(['$anchorScroll', function($anchorScroll) {
+ $anchorScroll.yOffset = 50; // always scroll by 50 extra pixels
+ }])
+ .controller('headerCtrl', ['$anchorScroll', '$location', '$scope',
+ function ($anchorScroll, $location, $scope) {
+ $scope.gotoAnchor = function(x) {
+ var newHash = 'anchor' + x;
+ if ($location.hash() !== newHash) {
+ // set the $location.hash to `newHash` and
+ // $anchorScroll will automatically scroll to it
+ $location.hash('anchor' + x);
+ } else {
+ // call $anchorScroll() explicitly,
+ // since $location.hash hasn't changed
+ $anchorScroll();
+ }
+ };
+ }
+ ]);
+
+
+ body {
+ padding-top: 50px;
+ }
+
+ .anchor {
+ border: 2px dashed DarkOrchid;
+ padding: 10px 10px 200px 10px;
+ }
+
+ .fixed-header {
+ background-color: rgba(0, 0, 0, 0.2);
+ height: 50px;
+ position: fixed;
+ top: 0; left: 0; right: 0;
+ }
+
+ .fixed-header > a {
+ display: inline-block;
+ margin: 5px 15px;
+ }
+
+
+ */
+ this.$get = ['$window', '$location', '$rootScope', function($window, $location, $rootScope) {
+ var document = $window.document;
+
+ // Helper function to get first anchor from a NodeList
+ // (using `Array#some()` instead of `angular#forEach()` since it's more performant
+ // and working in all supported browsers.)
+ function getFirstAnchor(list) {
+ var result = null;
+ Array.prototype.some.call(list, function(element) {
+ if (nodeName_(element) === 'a') {
+ result = element;
+ return true;
+ }
+ });
+ return result;
+ }
+
+ function getYOffset() {
+
+ var offset = scroll.yOffset;
+
+ if (isFunction(offset)) {
+ offset = offset();
+ } else if (isElement(offset)) {
+ var elem = offset[0];
+ var style = $window.getComputedStyle(elem);
+ if (style.position !== 'fixed') {
+ offset = 0;
+ } else {
+ offset = elem.getBoundingClientRect().bottom;
+ }
+ } else if (!isNumber(offset)) {
+ offset = 0;
+ }
+
+ return offset;
+ }
+
+ function scrollTo(elem) {
+ if (elem) {
+ elem.scrollIntoView();
+
+ var offset = getYOffset();
+
+ if (offset) {
+ // `offset` is the number of pixels we should scroll UP in order to align `elem` properly.
+ // This is true ONLY if the call to `elem.scrollIntoView()` initially aligns `elem` at the
+ // top of the viewport.
+ //
+ // IF the number of pixels from the top of `elem` to the end of the page's content is less
+ // than the height of the viewport, then `elem.scrollIntoView()` will align the `elem` some
+ // way down the page.
+ //
+ // This is often the case for elements near the bottom of the page.
+ //
+ // In such cases we do not need to scroll the whole `offset` up, just the difference between
+ // the top of the element and the offset, which is enough to align the top of `elem` at the
+ // desired position.
+ var elemTop = elem.getBoundingClientRect().top;
+ $window.scrollBy(0, elemTop - offset);
+ }
+ } else {
+ $window.scrollTo(0, 0);
+ }
+ }
+
+ function scroll(hash) {
+ hash = isString(hash) ? hash : $location.hash();
+ var elm;
+
+ // empty hash, scroll to the top of the page
+ if (!hash) scrollTo(null);
+
+ // element with given id
+ else if ((elm = document.getElementById(hash))) scrollTo(elm);
+
+ // first anchor with given name :-D
+ else if ((elm = getFirstAnchor(document.getElementsByName(hash)))) scrollTo(elm);
+
+ // no element and hash == 'top', scroll to the top of the page
+ else if (hash === 'top') scrollTo(null);
+ }
+
+ // does not scroll when user clicks on anchor link that is currently on
+ // (no url change, no $location.hash() change), browser native does scroll
+ if (autoScrollingEnabled) {
+ $rootScope.$watch(function autoScrollWatch() {return $location.hash();},
+ function autoScrollWatchAction(newVal, oldVal) {
+ // skip the initial scroll if $location.hash is empty
+ if (newVal === oldVal && newVal === '') return;
+
+ jqLiteDocumentLoaded(function() {
+ $rootScope.$evalAsync(scroll);
+ });
+ });
+ }
+
+ return scroll;
+ }];
+}
+
+var $animateMinErr = minErr('$animate');
+var ELEMENT_NODE = 1;
+var NG_ANIMATE_CLASSNAME = 'ng-animate';
+
+function mergeClasses(a,b) {
+ if (!a && !b) return '';
+ if (!a) return b;
+ if (!b) return a;
+ if (isArray(a)) a = a.join(' ');
+ if (isArray(b)) b = b.join(' ');
+ return a + ' ' + b;
+}
+
+function extractElementNode(element) {
+ for (var i = 0; i < element.length; i++) {
+ var elm = element[i];
+ if (elm.nodeType === ELEMENT_NODE) {
+ return elm;
+ }
+ }
+}
+
+function splitClasses(classes) {
+ if (isString(classes)) {
+ classes = classes.split(' ');
+ }
+
+ // Use createMap() to prevent class assumptions involving property names in
+ // Object.prototype
+ var obj = createMap();
+ forEach(classes, function(klass) {
+ // sometimes the split leaves empty string values
+ // incase extra spaces were applied to the options
+ if (klass.length) {
+ obj[klass] = true;
+ }
+ });
+ return obj;
+}
+
+// if any other type of options value besides an Object value is
+// passed into the $animate.method() animation then this helper code
+// will be run which will ignore it. While this patch is not the
+// greatest solution to this, a lot of existing plugins depend on
+// $animate to either call the callback (< 1.2) or return a promise
+// that can be changed. This helper function ensures that the options
+// are wiped clean incase a callback function is provided.
+function prepareAnimateOptions(options) {
+ return isObject(options)
+ ? options
+ : {};
+}
+
+var $$CoreAnimateRunnerProvider = function() {
+ this.$get = ['$q', '$$rAF', function($q, $$rAF) {
+ function AnimateRunner() {}
+ AnimateRunner.all = noop;
+ AnimateRunner.chain = noop;
+ AnimateRunner.prototype = {
+ end: noop,
+ cancel: noop,
+ resume: noop,
+ pause: noop,
+ complete: noop,
+ then: function(pass, fail) {
+ return $q(function(resolve) {
+ $$rAF(function() {
+ resolve();
+ });
+ }).then(pass, fail);
+ }
+ };
+ return AnimateRunner;
+ }];
+};
+
+// this is prefixed with Core since it conflicts with
+// the animateQueueProvider defined in ngAnimate/animateQueue.js
+var $$CoreAnimateQueueProvider = function() {
+ var postDigestQueue = new HashMap();
+ var postDigestElements = [];
+
+ this.$get = ['$$AnimateRunner', '$rootScope',
+ function($$AnimateRunner, $rootScope) {
+ return {
+ enabled: noop,
+ on: noop,
+ off: noop,
+ pin: noop,
+
+ push: function(element, event, options, domOperation) {
+ domOperation && domOperation();
+
+ options = options || {};
+ options.from && element.css(options.from);
+ options.to && element.css(options.to);
+
+ if (options.addClass || options.removeClass) {
+ addRemoveClassesPostDigest(element, options.addClass, options.removeClass);
+ }
+
+ return new $$AnimateRunner(); // jshint ignore:line
+ }
+ };
+
+ function addRemoveClassesPostDigest(element, add, remove) {
+ var data = postDigestQueue.get(element);
+ var classVal;
+
+ if (!data) {
+ postDigestQueue.put(element, data = {});
+ postDigestElements.push(element);
+ }
+
+ if (add) {
+ forEach(add.split(' '), function(className) {
+ if (className) {
+ data[className] = true;
+ }
+ });
+ }
+
+ if (remove) {
+ forEach(remove.split(' '), function(className) {
+ if (className) {
+ data[className] = false;
+ }
+ });
+ }
+
+ if (postDigestElements.length > 1) return;
+
+ $rootScope.$$postDigest(function() {
+ forEach(postDigestElements, function(element) {
+ var data = postDigestQueue.get(element);
+ if (data) {
+ var existing = splitClasses(element.attr('class'));
+ var toAdd = '';
+ var toRemove = '';
+ forEach(data, function(status, className) {
+ var hasClass = !!existing[className];
+ if (status !== hasClass) {
+ if (status) {
+ toAdd += (toAdd.length ? ' ' : '') + className;
+ } else {
+ toRemove += (toRemove.length ? ' ' : '') + className;
+ }
+ }
+ });
+
+ forEach(element, function(elm) {
+ toAdd && jqLiteAddClass(elm, toAdd);
+ toRemove && jqLiteRemoveClass(elm, toRemove);
+ });
+ postDigestQueue.remove(element);
+ }
+ });
+
+ postDigestElements.length = 0;
+ });
+ }
+ }];
+};
+
+/**
+ * @ngdoc provider
+ * @name $animateProvider
+ *
+ * @description
+ * Default implementation of $animate that doesn't perform any animations, instead just
+ * synchronously performs DOM updates and resolves the returned runner promise.
+ *
+ * In order to enable animations the `ngAnimate` module has to be loaded.
+ *
+ * To see the functional implementation check out `src/ngAnimate/animate.js`.
+ */
+var $AnimateProvider = ['$provide', function($provide) {
+ var provider = this;
+
+ this.$$registeredAnimations = Object.create(null);
+
+ /**
+ * @ngdoc method
+ * @name $animateProvider#register
+ *
+ * @description
+ * Registers a new injectable animation factory function. The factory function produces the
+ * animation object which contains callback functions for each event that is expected to be
+ * animated.
+ *
+ * * `eventFn`: `function(element, ... , doneFunction, options)`
+ * The element to animate, the `doneFunction` and the options fed into the animation. Depending
+ * on the type of animation additional arguments will be injected into the animation function. The
+ * list below explains the function signatures for the different animation methods:
+ *
+ * - setClass: function(element, addedClasses, removedClasses, doneFunction, options)
+ * - addClass: function(element, addedClasses, doneFunction, options)
+ * - removeClass: function(element, removedClasses, doneFunction, options)
+ * - enter, leave, move: function(element, doneFunction, options)
+ * - animate: function(element, fromStyles, toStyles, doneFunction, options)
+ *
+ * Make sure to trigger the `doneFunction` once the animation is fully complete.
+ *
+ * ```js
+ * return {
+ * //enter, leave, move signature
+ * eventFn : function(element, done, options) {
+ * //code to run the animation
+ * //once complete, then run done()
+ * return function endFunction(wasCancelled) {
+ * //code to cancel the animation
+ * }
+ * }
+ * }
+ * ```
+ *
+ * @param {string} name The name of the animation (this is what the class-based CSS value will be compared to).
+ * @param {Function} factory The factory function that will be executed to return the animation
+ * object.
+ */
+ this.register = function(name, factory) {
+ if (name && name.charAt(0) !== '.') {
+ throw $animateMinErr('notcsel', "Expecting class selector starting with '.' got '{0}'.", name);
+ }
+
+ var key = name + '-animation';
+ provider.$$registeredAnimations[name.substr(1)] = key;
+ $provide.factory(key, factory);
+ };
+
+ /**
+ * @ngdoc method
+ * @name $animateProvider#classNameFilter
+ *
+ * @description
+ * Sets and/or returns the CSS class regular expression that is checked when performing
+ * an animation. Upon bootstrap the classNameFilter value is not set at all and will
+ * therefore enable $animate to attempt to perform an animation on any element that is triggered.
+ * When setting the `classNameFilter` value, animations will only be performed on elements
+ * that successfully match the filter expression. This in turn can boost performance
+ * for low-powered devices as well as applications containing a lot of structural operations.
+ * @param {RegExp=} expression The className expression which will be checked against all animations
+ * @return {RegExp} The current CSS className expression value. If null then there is no expression value
+ */
+ this.classNameFilter = function(expression) {
+ if (arguments.length === 1) {
+ this.$$classNameFilter = (expression instanceof RegExp) ? expression : null;
+ if (this.$$classNameFilter) {
+ var reservedRegex = new RegExp("(\\s+|\\/)" + NG_ANIMATE_CLASSNAME + "(\\s+|\\/)");
+ if (reservedRegex.test(this.$$classNameFilter.toString())) {
+ throw $animateMinErr('nongcls','$animateProvider.classNameFilter(regex) prohibits accepting a regex value which matches/contains the "{0}" CSS class.', NG_ANIMATE_CLASSNAME);
+
+ }
+ }
+ }
+ return this.$$classNameFilter;
+ };
+
+ this.$get = ['$$animateQueue', function($$animateQueue) {
+ function domInsert(element, parentElement, afterElement) {
+ // if for some reason the previous element was removed
+ // from the dom sometime before this code runs then let's
+ // just stick to using the parent element as the anchor
+ if (afterElement) {
+ var afterNode = extractElementNode(afterElement);
+ if (afterNode && !afterNode.parentNode && !afterNode.previousElementSibling) {
+ afterElement = null;
+ }
+ }
+ afterElement ? afterElement.after(element) : parentElement.prepend(element);
+ }
+
+ /**
+ * @ngdoc service
+ * @name $animate
+ * @description The $animate service exposes a series of DOM utility methods that provide support
+ * for animation hooks. The default behavior is the application of DOM operations, however,
+ * when an animation is detected (and animations are enabled), $animate will do the heavy lifting
+ * to ensure that animation runs with the triggered DOM operation.
+ *
+ * By default $animate doesn't trigger an animations. This is because the `ngAnimate` module isn't
+ * included and only when it is active then the animation hooks that `$animate` triggers will be
+ * functional. Once active then all structural `ng-` directives will trigger animations as they perform
+ * their DOM-related operations (enter, leave and move). Other directives such as `ngClass`,
+ * `ngShow`, `ngHide` and `ngMessages` also provide support for animations.
+ *
+ * It is recommended that the`$animate` service is always used when executing DOM-related procedures within directives.
+ *
+ * To learn more about enabling animation support, click here to visit the
+ * {@link ngAnimate ngAnimate module page}.
+ */
+ return {
+ // we don't call it directly since non-existant arguments may
+ // be interpreted as null within the sub enabled function
+
+ /**
+ *
+ * @ngdoc method
+ * @name $animate#on
+ * @kind function
+ * @description Sets up an event listener to fire whenever the animation event (enter, leave, move, etc...)
+ * has fired on the given element or among any of its children. Once the listener is fired, the provided callback
+ * is fired with the following params:
+ *
+ * ```js
+ * $animate.on('enter', container,
+ * function callback(element, phase) {
+ * // cool we detected an enter animation within the container
+ * }
+ * );
+ * ```
+ *
+ * @param {string} event the animation event that will be captured (e.g. enter, leave, move, addClass, removeClass, etc...)
+ * @param {DOMElement} container the container element that will capture each of the animation events that are fired on itself
+ * as well as among its children
+ * @param {Function} callback the callback function that will be fired when the listener is triggered
+ *
+ * The arguments present in the callback function are:
+ * * `element` - The captured DOM element that the animation was fired on.
+ * * `phase` - The phase of the animation. The two possible phases are **start** (when the animation starts) and **close** (when it ends).
+ */
+ on: $$animateQueue.on,
+
+ /**
+ *
+ * @ngdoc method
+ * @name $animate#off
+ * @kind function
+ * @description Deregisters an event listener based on the event which has been associated with the provided element. This method
+ * can be used in three different ways depending on the arguments:
+ *
+ * ```js
+ * // remove all the animation event listeners listening for `enter`
+ * $animate.off('enter');
+ *
+ * // remove all the animation event listeners listening for `enter` on the given element and its children
+ * $animate.off('enter', container);
+ *
+ * // remove the event listener function provided by `listenerFn` that is set
+ * // to listen for `enter` on the given `element` as well as its children
+ * $animate.off('enter', container, callback);
+ * ```
+ *
+ * @param {string} event the animation event (e.g. enter, leave, move, addClass, removeClass, etc...)
+ * @param {DOMElement=} container the container element the event listener was placed on
+ * @param {Function=} callback the callback function that was registered as the listener
+ */
+ off: $$animateQueue.off,
+
+ /**
+ * @ngdoc method
+ * @name $animate#pin
+ * @kind function
+ * @description Associates the provided element with a host parent element to allow the element to be animated even if it exists
+ * outside of the DOM structure of the Angular application. By doing so, any animation triggered via `$animate` can be issued on the
+ * element despite being outside the realm of the application or within another application. Say for example if the application
+ * was bootstrapped on an element that is somewhere inside of the `` tag, but we wanted to allow for an element to be situated
+ * as a direct child of `document.body`, then this can be achieved by pinning the element via `$animate.pin(element)`. Keep in mind
+ * that calling `$animate.pin(element, parentElement)` will not actually insert into the DOM anywhere; it will just create the association.
+ *
+ * Note that this feature is only active when the `ngAnimate` module is used.
+ *
+ * @param {DOMElement} element the external element that will be pinned
+ * @param {DOMElement} parentElement the host parent element that will be associated with the external element
+ */
+ pin: $$animateQueue.pin,
+
+ /**
+ *
+ * @ngdoc method
+ * @name $animate#enabled
+ * @kind function
+ * @description Used to get and set whether animations are enabled or not on the entire application or on an element and its children. This
+ * function can be called in four ways:
+ *
+ * ```js
+ * // returns true or false
+ * $animate.enabled();
+ *
+ * // changes the enabled state for all animations
+ * $animate.enabled(false);
+ * $animate.enabled(true);
+ *
+ * // returns true or false if animations are enabled for an element
+ * $animate.enabled(element);
+ *
+ * // changes the enabled state for an element and its children
+ * $animate.enabled(element, true);
+ * $animate.enabled(element, false);
+ * ```
+ *
+ * @param {DOMElement=} element the element that will be considered for checking/setting the enabled state
+ * @param {boolean=} enabled whether or not the animations will be enabled for the element
+ *
+ * @return {boolean} whether or not animations are enabled
+ */
+ enabled: $$animateQueue.enabled,
+
+ /**
+ * @ngdoc method
+ * @name $animate#cancel
+ * @kind function
+ * @description Cancels the provided animation.
+ *
+ * @param {Promise} animationPromise The animation promise that is returned when an animation is started.
+ */
+ cancel: function(runner) {
+ runner.end && runner.end();
+ },
+
+ /**
+ *
+ * @ngdoc method
+ * @name $animate#enter
+ * @kind function
+ * @description Inserts the element into the DOM either after the `after` element (if provided) or
+ * as the first child within the `parent` element and then triggers an animation.
+ * A promise is returned that will be resolved during the next digest once the animation
+ * has completed.
+ *
+ * @param {DOMElement} element the element which will be inserted into the DOM
+ * @param {DOMElement} parent the parent element which will append the element as
+ * a child (so long as the after element is not present)
+ * @param {DOMElement=} after the sibling element after which the element will be appended
+ * @param {object=} options an optional collection of options/styles that will be applied to the element
+ *
+ * @return {Promise} the animation callback promise
+ */
+ enter: function(element, parent, after, options) {
+ parent = parent && jqLite(parent);
+ after = after && jqLite(after);
+ parent = parent || after.parent();
+ domInsert(element, parent, after);
+ return $$animateQueue.push(element, 'enter', prepareAnimateOptions(options));
+ },
+
+ /**
+ *
+ * @ngdoc method
+ * @name $animate#move
+ * @kind function
+ * @description Inserts (moves) the element into its new position in the DOM either after
+ * the `after` element (if provided) or as the first child within the `parent` element
+ * and then triggers an animation. A promise is returned that will be resolved
+ * during the next digest once the animation has completed.
+ *
+ * @param {DOMElement} element the element which will be moved into the new DOM position
+ * @param {DOMElement} parent the parent element which will append the element as
+ * a child (so long as the after element is not present)
+ * @param {DOMElement=} after the sibling element after which the element will be appended
+ * @param {object=} options an optional collection of options/styles that will be applied to the element
+ *
+ * @return {Promise} the animation callback promise
+ */
+ move: function(element, parent, after, options) {
+ parent = parent && jqLite(parent);
+ after = after && jqLite(after);
+ parent = parent || after.parent();
+ domInsert(element, parent, after);
+ return $$animateQueue.push(element, 'move', prepareAnimateOptions(options));
+ },
+
+ /**
+ * @ngdoc method
+ * @name $animate#leave
+ * @kind function
+ * @description Triggers an animation and then removes the element from the DOM.
+ * When the function is called a promise is returned that will be resolved during the next
+ * digest once the animation has completed.
+ *
+ * @param {DOMElement} element the element which will be removed from the DOM
+ * @param {object=} options an optional collection of options/styles that will be applied to the element
+ *
+ * @return {Promise} the animation callback promise
+ */
+ leave: function(element, options) {
+ return $$animateQueue.push(element, 'leave', prepareAnimateOptions(options), function() {
+ element.remove();
+ });
+ },
+
+ /**
+ * @ngdoc method
+ * @name $animate#addClass
+ * @kind function
+ *
+ * @description Triggers an addClass animation surrounding the addition of the provided CSS class(es). Upon
+ * execution, the addClass operation will only be handled after the next digest and it will not trigger an
+ * animation if element already contains the CSS class or if the class is removed at a later step.
+ * Note that class-based animations are treated differently compared to structural animations
+ * (like enter, move and leave) since the CSS classes may be added/removed at different points
+ * depending if CSS or JavaScript animations are used.
+ *
+ * @param {DOMElement} element the element which the CSS classes will be applied to
+ * @param {string} className the CSS class(es) that will be added (multiple classes are separated via spaces)
+ * @param {object=} options an optional collection of options/styles that will be applied to the element
+ *
+ * @return {Promise} the animation callback promise
+ */
+ addClass: function(element, className, options) {
+ options = prepareAnimateOptions(options);
+ options.addClass = mergeClasses(options.addclass, className);
+ return $$animateQueue.push(element, 'addClass', options);
+ },
+
+ /**
+ * @ngdoc method
+ * @name $animate#removeClass
+ * @kind function
+ *
+ * @description Triggers a removeClass animation surrounding the removal of the provided CSS class(es). Upon
+ * execution, the removeClass operation will only be handled after the next digest and it will not trigger an
+ * animation if element does not contain the CSS class or if the class is added at a later step.
+ * Note that class-based animations are treated differently compared to structural animations
+ * (like enter, move and leave) since the CSS classes may be added/removed at different points
+ * depending if CSS or JavaScript animations are used.
+ *
+ * @param {DOMElement} element the element which the CSS classes will be applied to
+ * @param {string} className the CSS class(es) that will be removed (multiple classes are separated via spaces)
+ * @param {object=} options an optional collection of options/styles that will be applied to the element
+ *
+ * @return {Promise} the animation callback promise
+ */
+ removeClass: function(element, className, options) {
+ options = prepareAnimateOptions(options);
+ options.removeClass = mergeClasses(options.removeClass, className);
+ return $$animateQueue.push(element, 'removeClass', options);
+ },
+
+ /**
+ * @ngdoc method
+ * @name $animate#setClass
+ * @kind function
+ *
+ * @description Performs both the addition and removal of a CSS classes on an element and (during the process)
+ * triggers an animation surrounding the class addition/removal. Much like `$animate.addClass` and
+ * `$animate.removeClass`, `setClass` will only evaluate the classes being added/removed once a digest has
+ * passed. Note that class-based animations are treated differently compared to structural animations
+ * (like enter, move and leave) since the CSS classes may be added/removed at different points
+ * depending if CSS or JavaScript animations are used.
+ *
+ * @param {DOMElement} element the element which the CSS classes will be applied to
+ * @param {string} add the CSS class(es) that will be added (multiple classes are separated via spaces)
+ * @param {string} remove the CSS class(es) that will be removed (multiple classes are separated via spaces)
+ * @param {object=} options an optional collection of options/styles that will be applied to the element
+ *
+ * @return {Promise} the animation callback promise
+ */
+ setClass: function(element, add, remove, options) {
+ options = prepareAnimateOptions(options);
+ options.addClass = mergeClasses(options.addClass, add);
+ options.removeClass = mergeClasses(options.removeClass, remove);
+ return $$animateQueue.push(element, 'setClass', options);
+ },
+
+ /**
+ * @ngdoc method
+ * @name $animate#animate
+ * @kind function
+ *
+ * @description Performs an inline animation on the element which applies the provided to and from CSS styles to the element.
+ * If any detected CSS transition, keyframe or JavaScript matches the provided className value then the animation will take
+ * on the provided styles. For example, if a transition animation is set for the given className then the provided from and
+ * to styles will be applied alongside the given transition. If a JavaScript animation is detected then the provided styles
+ * will be given in as function paramters into the `animate` method (or as apart of the `options` parameter).
+ *
+ * @param {DOMElement} element the element which the CSS styles will be applied to
+ * @param {object} from the from (starting) CSS styles that will be applied to the element and across the animation.
+ * @param {object} to the to (destination) CSS styles that will be applied to the element and across the animation.
+ * @param {string=} className an optional CSS class that will be applied to the element for the duration of the animation. If
+ * this value is left as empty then a CSS class of `ng-inline-animate` will be applied to the element.
+ * (Note that if no animation is detected then this value will not be appplied to the element.)
+ * @param {object=} options an optional collection of options/styles that will be applied to the element
+ *
+ * @return {Promise} the animation callback promise
+ */
+ animate: function(element, from, to, className, options) {
+ options = prepareAnimateOptions(options);
+ options.from = options.from ? extend(options.from, from) : from;
+ options.to = options.to ? extend(options.to, to) : to;
+
+ className = className || 'ng-inline-animate';
+ options.tempClasses = mergeClasses(options.tempClasses, className);
+ return $$animateQueue.push(element, 'animate', options);
+ }
+ };
+ }];
+}];
+
+function $$AsyncCallbackProvider() {
+ this.$get = ['$$rAF', '$timeout', function($$rAF, $timeout) {
+ return $$rAF.supported
+ ? function(fn) { return $$rAF(fn); }
+ : function(fn) {
+ return $timeout(fn, 0, false);
+ };
+ }];
+}
+
+/* global stripHash: true */
+
+/**
+ * ! This is a private undocumented service !
+ *
+ * @name $browser
+ * @requires $log
+ * @description
+ * This object has two goals:
+ *
+ * - hide all the global state in the browser caused by the window object
+ * - abstract away all the browser specific features and inconsistencies
+ *
+ * For tests we provide {@link ngMock.$browser mock implementation} of the `$browser`
+ * service, which can be used for convenient testing of the application without the interaction with
+ * the real browser apis.
+ */
+/**
+ * @param {object} window The global window object.
+ * @param {object} document jQuery wrapped document.
+ * @param {object} $log window.console or an object with the same interface.
+ * @param {object} $sniffer $sniffer service
+ */
+function Browser(window, document, $log, $sniffer) {
+ var self = this,
+ rawDocument = document[0],
+ location = window.location,
+ history = window.history,
+ setTimeout = window.setTimeout,
+ clearTimeout = window.clearTimeout,
+ pendingDeferIds = {};
+
+ self.isMock = false;
+
+ var outstandingRequestCount = 0;
+ var outstandingRequestCallbacks = [];
+
+ // TODO(vojta): remove this temporary api
+ self.$$completeOutstandingRequest = completeOutstandingRequest;
+ self.$$incOutstandingRequestCount = function() { outstandingRequestCount++; };
+
+ /**
+ * Executes the `fn` function(supports currying) and decrements the `outstandingRequestCallbacks`
+ * counter. If the counter reaches 0, all the `outstandingRequestCallbacks` are executed.
+ */
+ function completeOutstandingRequest(fn) {
+ try {
+ fn.apply(null, sliceArgs(arguments, 1));
+ } finally {
+ outstandingRequestCount--;
+ if (outstandingRequestCount === 0) {
+ while (outstandingRequestCallbacks.length) {
+ try {
+ outstandingRequestCallbacks.pop()();
+ } catch (e) {
+ $log.error(e);
+ }
+ }
+ }
+ }
+ }
+
+ function getHash(url) {
+ var index = url.indexOf('#');
+ return index === -1 ? '' : url.substr(index);
+ }
+
+ /**
+ * @private
+ * Note: this method is used only by scenario runner
+ * TODO(vojta): prefix this method with $$ ?
+ * @param {function()} callback Function that will be called when no outstanding request
+ */
+ self.notifyWhenNoOutstandingRequests = function(callback) {
+ if (outstandingRequestCount === 0) {
+ callback();
+ } else {
+ outstandingRequestCallbacks.push(callback);
+ }
+ };
+
+ //////////////////////////////////////////////////////////////
+ // URL API
+ //////////////////////////////////////////////////////////////
+
+ var cachedState, lastHistoryState,
+ lastBrowserUrl = location.href,
+ baseElement = document.find('base'),
+ reloadLocation = null;
+
+ cacheState();
+ lastHistoryState = cachedState;
+
+ /**
+ * @name $browser#url
+ *
+ * @description
+ * GETTER:
+ * Without any argument, this method just returns current value of location.href.
+ *
+ * SETTER:
+ * With at least one argument, this method sets url to new value.
+ * If html5 history api supported, pushState/replaceState is used, otherwise
+ * location.href/location.replace is used.
+ * Returns its own instance to allow chaining
+ *
+ * NOTE: this api is intended for use only by the $location service. Please use the
+ * {@link ng.$location $location service} to change url.
+ *
+ * @param {string} url New url (when used as setter)
+ * @param {boolean=} replace Should new url replace current history record?
+ * @param {object=} state object to use with pushState/replaceState
+ */
+ self.url = function(url, replace, state) {
+ // In modern browsers `history.state` is `null` by default; treating it separately
+ // from `undefined` would cause `$browser.url('/foo')` to change `history.state`
+ // to undefined via `pushState`. Instead, let's change `undefined` to `null` here.
+ if (isUndefined(state)) {
+ state = null;
+ }
+
+ // Android Browser BFCache causes location, history reference to become stale.
+ if (location !== window.location) location = window.location;
+ if (history !== window.history) history = window.history;
+
+ // setter
+ if (url) {
+ var sameState = lastHistoryState === state;
+
+ // Don't change anything if previous and current URLs and states match. This also prevents
+ // IE<10 from getting into redirect loop when in LocationHashbangInHtml5Url mode.
+ // See https://github.com/angular/angular.js/commit/ffb2701
+ if (lastBrowserUrl === url && (!$sniffer.history || sameState)) {
+ return self;
+ }
+ var sameBase = lastBrowserUrl && stripHash(lastBrowserUrl) === stripHash(url);
+ lastBrowserUrl = url;
+ lastHistoryState = state;
+ // Don't use history API if only the hash changed
+ // due to a bug in IE10/IE11 which leads
+ // to not firing a `hashchange` nor `popstate` event
+ // in some cases (see #9143).
+ if ($sniffer.history && (!sameBase || !sameState)) {
+ history[replace ? 'replaceState' : 'pushState'](state, '', url);
+ cacheState();
+ // Do the assignment again so that those two variables are referentially identical.
+ lastHistoryState = cachedState;
+ } else {
+ if (!sameBase || reloadLocation) {
+ reloadLocation = url;
+ }
+ if (replace) {
+ location.replace(url);
+ } else if (!sameBase) {
+ location.href = url;
+ } else {
+ location.hash = getHash(url);
+ }
+ }
+ return self;
+ // getter
+ } else {
+ // - reloadLocation is needed as browsers don't allow to read out
+ // the new location.href if a reload happened.
+ // - the replacement is a workaround for https://bugzilla.mozilla.org/show_bug.cgi?id=407172
+ return reloadLocation || location.href.replace(/%27/g,"'");
+ }
+ };
+
+ /**
+ * @name $browser#state
+ *
+ * @description
+ * This method is a getter.
+ *
+ * Return history.state or null if history.state is undefined.
+ *
+ * @returns {object} state
+ */
+ self.state = function() {
+ return cachedState;
+ };
+
+ var urlChangeListeners = [],
+ urlChangeInit = false;
+
+ function cacheStateAndFireUrlChange() {
+ cacheState();
+ fireUrlChange();
+ }
+
+ function getCurrentState() {
+ try {
+ return history.state;
+ } catch (e) {
+ // MSIE can reportedly throw when there is no state (UNCONFIRMED).
+ }
+ }
+
+ // This variable should be used *only* inside the cacheState function.
+ var lastCachedState = null;
+ function cacheState() {
+ // This should be the only place in $browser where `history.state` is read.
+ cachedState = getCurrentState();
+ cachedState = isUndefined(cachedState) ? null : cachedState;
+
+ // Prevent callbacks fo fire twice if both hashchange & popstate were fired.
+ if (equals(cachedState, lastCachedState)) {
+ cachedState = lastCachedState;
+ }
+ lastCachedState = cachedState;
+ }
+
+ function fireUrlChange() {
+ if (lastBrowserUrl === self.url() && lastHistoryState === cachedState) {
+ return;
+ }
+
+ lastBrowserUrl = self.url();
+ lastHistoryState = cachedState;
+ forEach(urlChangeListeners, function(listener) {
+ listener(self.url(), cachedState);
+ });
+ }
+
+ /**
+ * @name $browser#onUrlChange
+ *
+ * @description
+ * Register callback function that will be called, when url changes.
+ *
+ * It's only called when the url is changed from outside of angular:
+ * - user types different url into address bar
+ * - user clicks on history (forward/back) button
+ * - user clicks on a link
+ *
+ * It's not called when url is changed by $browser.url() method
+ *
+ * The listener gets called with new url as parameter.
+ *
+ * NOTE: this api is intended for use only by the $location service. Please use the
+ * {@link ng.$location $location service} to monitor url changes in angular apps.
+ *
+ * @param {function(string)} listener Listener function to be called when url changes.
+ * @return {function(string)} Returns the registered listener fn - handy if the fn is anonymous.
+ */
+ self.onUrlChange = function(callback) {
+ // TODO(vojta): refactor to use node's syntax for events
+ if (!urlChangeInit) {
+ // We listen on both (hashchange/popstate) when available, as some browsers (e.g. Opera)
+ // don't fire popstate when user change the address bar and don't fire hashchange when url
+ // changed by push/replaceState
+
+ // html5 history api - popstate event
+ if ($sniffer.history) jqLite(window).on('popstate', cacheStateAndFireUrlChange);
+ // hashchange event
+ jqLite(window).on('hashchange', cacheStateAndFireUrlChange);
+
+ urlChangeInit = true;
+ }
+
+ urlChangeListeners.push(callback);
+ return callback;
+ };
+
+ /**
+ * @private
+ * Remove popstate and hashchange handler from window.
+ *
+ * NOTE: this api is intended for use only by $rootScope.
+ */
+ self.$$applicationDestroyed = function() {
+ jqLite(window).off('hashchange popstate', cacheStateAndFireUrlChange);
+ };
+
+ /**
+ * Checks whether the url has changed outside of Angular.
+ * Needs to be exported to be able to check for changes that have been done in sync,
+ * as hashchange/popstate events fire in async.
+ */
+ self.$$checkUrlChange = fireUrlChange;
+
+ //////////////////////////////////////////////////////////////
+ // Misc API
+ //////////////////////////////////////////////////////////////
+
+ /**
+ * @name $browser#baseHref
+ *
+ * @description
+ * Returns current
+
+
+
+ angular.module('cacheExampleApp', []).
+ controller('CacheController', ['$scope', '$cacheFactory', function($scope, $cacheFactory) {
+ $scope.keys = [];
+ $scope.cache = $cacheFactory('cacheId');
+ $scope.put = function(key, value) {
+ if ($scope.cache.get(key) === undefined) {
+ $scope.keys.push(key);
+ }
+ $scope.cache.put(key, value === undefined ? null : value);
+ };
+ }]);
+
+
+ p {
+ margin: 10px 0 3px;
+ }
+
+
+ */
+function $CacheFactoryProvider() {
+
+ this.$get = function() {
+ var caches = {};
+
+ function cacheFactory(cacheId, options) {
+ if (cacheId in caches) {
+ throw minErr('$cacheFactory')('iid', "CacheId '{0}' is already taken!", cacheId);
+ }
+
+ var size = 0,
+ stats = extend({}, options, {id: cacheId}),
+ data = {},
+ capacity = (options && options.capacity) || Number.MAX_VALUE,
+ lruHash = {},
+ freshEnd = null,
+ staleEnd = null;
+
+ /**
+ * @ngdoc type
+ * @name $cacheFactory.Cache
+ *
+ * @description
+ * A cache object used to store and retrieve data, primarily used by
+ * {@link $http $http} and the {@link ng.directive:script script} directive to cache
+ * templates and other data.
+ *
+ * ```js
+ * angular.module('superCache')
+ * .factory('superCache', ['$cacheFactory', function($cacheFactory) {
+ * return $cacheFactory('super-cache');
+ * }]);
+ * ```
+ *
+ * Example test:
+ *
+ * ```js
+ * it('should behave like a cache', inject(function(superCache) {
+ * superCache.put('key', 'value');
+ * superCache.put('another key', 'another value');
+ *
+ * expect(superCache.info()).toEqual({
+ * id: 'super-cache',
+ * size: 2
+ * });
+ *
+ * superCache.remove('another key');
+ * expect(superCache.get('another key')).toBeUndefined();
+ *
+ * superCache.removeAll();
+ * expect(superCache.info()).toEqual({
+ * id: 'super-cache',
+ * size: 0
+ * });
+ * }));
+ * ```
+ */
+ return caches[cacheId] = {
+
+ /**
+ * @ngdoc method
+ * @name $cacheFactory.Cache#put
+ * @kind function
+ *
+ * @description
+ * Inserts a named entry into the {@link $cacheFactory.Cache Cache} object to be
+ * retrieved later, and incrementing the size of the cache if the key was not already
+ * present in the cache. If behaving like an LRU cache, it will also remove stale
+ * entries from the set.
+ *
+ * It will not insert undefined values into the cache.
+ *
+ * @param {string} key the key under which the cached data is stored.
+ * @param {*} value the value to store alongside the key. If it is undefined, the key
+ * will not be stored.
+ * @returns {*} the value stored.
+ */
+ put: function(key, value) {
+ if (isUndefined(value)) return;
+ if (capacity < Number.MAX_VALUE) {
+ var lruEntry = lruHash[key] || (lruHash[key] = {key: key});
+
+ refresh(lruEntry);
+ }
+
+ if (!(key in data)) size++;
+ data[key] = value;
+
+ if (size > capacity) {
+ this.remove(staleEnd.key);
+ }
+
+ return value;
+ },
+
+ /**
+ * @ngdoc method
+ * @name $cacheFactory.Cache#get
+ * @kind function
+ *
+ * @description
+ * Retrieves named data stored in the {@link $cacheFactory.Cache Cache} object.
+ *
+ * @param {string} key the key of the data to be retrieved
+ * @returns {*} the value stored.
+ */
+ get: function(key) {
+ if (capacity < Number.MAX_VALUE) {
+ var lruEntry = lruHash[key];
+
+ if (!lruEntry) return;
+
+ refresh(lruEntry);
+ }
+
+ return data[key];
+ },
+
+
+ /**
+ * @ngdoc method
+ * @name $cacheFactory.Cache#remove
+ * @kind function
+ *
+ * @description
+ * Removes an entry from the {@link $cacheFactory.Cache Cache} object.
+ *
+ * @param {string} key the key of the entry to be removed
+ */
+ remove: function(key) {
+ if (capacity < Number.MAX_VALUE) {
+ var lruEntry = lruHash[key];
+
+ if (!lruEntry) return;
+
+ if (lruEntry == freshEnd) freshEnd = lruEntry.p;
+ if (lruEntry == staleEnd) staleEnd = lruEntry.n;
+ link(lruEntry.n,lruEntry.p);
+
+ delete lruHash[key];
+ }
+
+ delete data[key];
+ size--;
+ },
+
+
+ /**
+ * @ngdoc method
+ * @name $cacheFactory.Cache#removeAll
+ * @kind function
+ *
+ * @description
+ * Clears the cache object of any entries.
+ */
+ removeAll: function() {
+ data = {};
+ size = 0;
+ lruHash = {};
+ freshEnd = staleEnd = null;
+ },
+
+
+ /**
+ * @ngdoc method
+ * @name $cacheFactory.Cache#destroy
+ * @kind function
+ *
+ * @description
+ * Destroys the {@link $cacheFactory.Cache Cache} object entirely,
+ * removing it from the {@link $cacheFactory $cacheFactory} set.
+ */
+ destroy: function() {
+ data = null;
+ stats = null;
+ lruHash = null;
+ delete caches[cacheId];
+ },
+
+
+ /**
+ * @ngdoc method
+ * @name $cacheFactory.Cache#info
+ * @kind function
+ *
+ * @description
+ * Retrieve information regarding a particular {@link $cacheFactory.Cache Cache}.
+ *
+ * @returns {object} an object with the following properties:
+ * ` and widget definition
+ * of `scope: { localName:'@myAttr' }`, then widget scope property `localName` will reflect
+ * the interpolated value of `hello {{name}}`. As the `name` attribute changes so will the
+ * `localName` property on the widget scope. The `name` is read from the parent scope (not
+ * component scope).
+ *
+ * * `=` or `=attr` - set up bi-directional binding between a local scope property and the
+ * parent scope property of name defined via the value of the `attr` attribute. If no `attr`
+ * name is specified then the attribute name is assumed to be the same as the local name.
+ * Given `` and widget definition of
+ * `scope: { localModel:'=myAttr' }`, then widget scope property `localModel` will reflect the
+ * value of `parentModel` on the parent scope. Any changes to `parentModel` will be reflected
+ * in `localModel` and any changes in `localModel` will reflect in `parentModel`. If the parent
+ * scope property doesn't exist, it will throw a NON_ASSIGNABLE_MODEL_EXPRESSION exception. You
+ * can avoid this behavior using `=?` or `=?attr` in order to flag the property as optional. If
+ * you want to shallow watch for changes (i.e. $watchCollection instead of $watch) you can use
+ * `=*` or `=*attr` (`=*?` or `=*?attr` if the property is optional).
+ *
+ * * `&` or `&attr` - provides a way to execute an expression in the context of the parent scope.
+ * If no `attr` name is specified then the attribute name is assumed to be the same as the
+ * local name. Given `` and widget definition of
+ * `scope: { localFn:'&myAttr' }`, then isolate scope property `localFn` will point to
+ * a function wrapper for the `count = count + value` expression. Often it's desirable to
+ * pass data from the isolated scope via an expression to the parent scope, this can be
+ * done by passing a map of local variable names and values into the expression wrapper fn.
+ * For example, if the expression is `increment(amount)` then we can specify the amount value
+ * by calling the `localFn` as `localFn({amount: 22})`.
+ *
+ *
+ * #### `bindToController`
+ * When an isolate scope is used for a component (see above), and `controllerAs` is used, `bindToController: true` will
+ * allow a component to have its properties bound to the controller, rather than to scope. When the controller
+ * is instantiated, the initial values of the isolate scope bindings are already available.
+ *
+ * #### `controller`
+ * Controller constructor function. The controller is instantiated before the
+ * pre-linking phase and it is shared with other directives (see
+ * `require` attribute). This allows the directives to communicate with each other and augment
+ * each other's behavior. The controller is injectable (and supports bracket notation) with the following locals:
+ *
+ * * `$scope` - Current scope associated with the element
+ * * `$element` - Current element
+ * * `$attrs` - Current attributes object for the element
+ * * `$transclude` - A transclude linking function pre-bound to the correct transclusion scope:
+ * `function([scope], cloneLinkingFn, futureParentElement)`.
+ * * `scope`: optional argument to override the scope.
+ * * `cloneLinkingFn`: optional argument to create clones of the original transcluded content.
+ * * `futureParentElement`:
+ * * defines the parent to which the `cloneLinkingFn` will add the cloned elements.
+ * * default: `$element.parent()` resp. `$element` for `transclude:'element'` resp. `transclude:true`.
+ * * only needed for transcludes that are allowed to contain non html elements (e.g. SVG elements)
+ * and when the `cloneLinkinFn` is passed,
+ * as those elements need to created and cloned in a special way when they are defined outside their
+ * usual containers (e.g. like `
+ I can add: {{a}} + {{b}} = {{ a+b }}
+
+
+
+
+ I can add: {{a}} + {{b}} = {{ a+b }}
+
+
+
+ This renders because the controller does not fail to + instantiate, by using explicit annotation style (see + script.js for details) +
+
+ Name:
+ Hello, {{name}}! + +
+
+ + Hello, {{name}}! + +
This renders because the controller does not fail to + instantiate, by using explicit annotation style + (see script.js for details) +
+
+ I can add: {{a}} + {{b}} = {{ a+b }}
+
+
+ The controller could not be instantiated, due to relying + on automatic function annotations (which are disabled in + strict mode). As such, the content of this section is not + interpolated, and there should be an error in your web console. +
+
+ * {{greeting}}
+ *
+ *
+ *
+ *
+ *
+ *
+ * ```
+ *
+ * @param {DOMElement} element DOM element which is the root of angular application.
+ * @param {Array
+ * **Note:** Filter names must be valid angular {@link expression} identifiers, such as `uppercase` or `orderBy`.
+ * Names with special characters, such as hyphens and dots, are not allowed. If you wish to namespace
+ * your filters, then you can use capitalization (`myappSubsectionFilterx`) or underscores
+ * (`myapp_subsection_filterx`).
+ *
+ */
+ filter: invokeLaterAndSetModuleName('$filterProvider', 'register'),
+
+ /**
+ * @ngdoc method
+ * @name angular.Module#controller
+ * @module ng
+ * @param {string|Object} name Controller name, or an object map of controllers where the
+ * keys are the names and the values are the constructors.
+ * @param {Function} constructor Controller constructor function.
+ * @description
+ * See {@link ng.$controllerProvider#register $controllerProvider.register()}.
+ */
+ controller: invokeLaterAndSetModuleName('$controllerProvider', 'register'),
+
+ /**
+ * @ngdoc method
+ * @name angular.Module#directive
+ * @module ng
+ * @param {string|Object} name Directive name, or an object map of directives where the
+ * keys are the names and the values are the factories.
+ * @param {Function} directiveFactory Factory function for creating new instance of
+ * directives.
+ * @description
+ * See {@link ng.$compileProvider#directive $compileProvider.directive()}.
+ */
+ directive: invokeLaterAndSetModuleName('$compileProvider', 'directive'),
+
+ /**
+ * @ngdoc method
+ * @name angular.Module#config
+ * @module ng
+ * @param {Function} configFn Execute this function on module load. Useful for service
+ * configuration.
+ * @description
+ * Use this method to register work which needs to be performed on module loading.
+ * For more about how to configure services, see
+ * {@link providers#provider-recipe Provider Recipe}.
+ */
+ config: config,
+
+ /**
+ * @ngdoc method
+ * @name angular.Module#run
+ * @module ng
+ * @param {Function} initializationFn Execute this function after injector creation.
+ * Useful for application initialization.
+ * @description
+ * Use this method to register work which should be performed when the injector is done
+ * loading all modules.
+ */
+ run: function(block) {
+ runBlocks.push(block);
+ return this;
+ }
+ };
+
+ if (configFn) {
+ config(configFn);
+ }
+
+ return moduleInstance;
+
+ /**
+ * @param {string} provider
+ * @param {string} method
+ * @param {String=} insertMethod
+ * @returns {angular.Module}
+ */
+ function invokeLater(provider, method, insertMethod, queue) {
+ if (!queue) queue = invokeQueue;
+ return function() {
+ queue[insertMethod || 'push']([provider, method, arguments]);
+ return moduleInstance;
+ };
+ }
+
+ /**
+ * @param {string} provider
+ * @param {string} method
+ * @returns {angular.Module}
+ */
+ function invokeLaterAndSetModuleName(provider, method) {
+ return function(recipeName, factoryFunction) {
+ if (factoryFunction && isFunction(factoryFunction)) factoryFunction.$$moduleName = name;
+ invokeQueue.push([provider, method, arguments]);
+ return moduleInstance;
+ };
+ }
+ });
+ };
+ });
+
+}
+
+/* global: toDebugString: true */
+
+function serializeObject(obj) {
+ var seen = [];
+
+ return JSON.stringify(obj, function(key, val) {
+ val = toJsonReplacer(key, val);
+ if (isObject(val)) {
+
+ if (seen.indexOf(val) >= 0) return '<jqLite is a tiny, API-compatible subset of jQuery that allows
+ * Angular to manipulate the DOM in a cross-browser compatible way. **jqLite** implements only the most
+ * commonly needed functionality with the goal of having a very small footprint.
+ *
+ * To use `jQuery`, simply ensure it is loaded before the `angular.js` file.
+ *
+ * **Note:** all element references in Angular are always wrapped with jQuery or
+ * jqLite; they are never raw DOM references.
+ *
+ * ## Angular's jqLite
+ * jqLite provides only the following jQuery methods:
+ *
+ * - [`addClass()`](http://api.jquery.com/addClass/)
+ * - [`after()`](http://api.jquery.com/after/)
+ * - [`append()`](http://api.jquery.com/append/)
+ * - [`attr()`](http://api.jquery.com/attr/) - Does not support functions as parameters
+ * - [`bind()`](http://api.jquery.com/bind/) - Does not support namespaces, selectors or eventData
+ * - [`children()`](http://api.jquery.com/children/) - Does not support selectors
+ * - [`clone()`](http://api.jquery.com/clone/)
+ * - [`contents()`](http://api.jquery.com/contents/)
+ * - [`css()`](http://api.jquery.com/css/) - Only retrieves inline-styles, does not call `getComputedStyle()`. As a setter, does not convert numbers to strings or append 'px'.
+ * - [`data()`](http://api.jquery.com/data/)
+ * - [`detach()`](http://api.jquery.com/detach/)
+ * - [`empty()`](http://api.jquery.com/empty/)
+ * - [`eq()`](http://api.jquery.com/eq/)
+ * - [`find()`](http://api.jquery.com/find/) - Limited to lookups by tag name
+ * - [`hasClass()`](http://api.jquery.com/hasClass/)
+ * - [`html()`](http://api.jquery.com/html/)
+ * - [`next()`](http://api.jquery.com/next/) - Does not support selectors
+ * - [`on()`](http://api.jquery.com/on/) - Does not support namespaces, selectors or eventData
+ * - [`off()`](http://api.jquery.com/off/) - Does not support namespaces or selectors
+ * - [`one()`](http://api.jquery.com/one/) - Does not support namespaces or selectors
+ * - [`parent()`](http://api.jquery.com/parent/) - Does not support selectors
+ * - [`prepend()`](http://api.jquery.com/prepend/)
+ * - [`prop()`](http://api.jquery.com/prop/)
+ * - [`ready()`](http://api.jquery.com/ready/)
+ * - [`remove()`](http://api.jquery.com/remove/)
+ * - [`removeAttr()`](http://api.jquery.com/removeAttr/)
+ * - [`removeClass()`](http://api.jquery.com/removeClass/)
+ * - [`removeData()`](http://api.jquery.com/removeData/)
+ * - [`replaceWith()`](http://api.jquery.com/replaceWith/)
+ * - [`text()`](http://api.jquery.com/text/)
+ * - [`toggleClass()`](http://api.jquery.com/toggleClass/)
+ * - [`triggerHandler()`](http://api.jquery.com/triggerHandler/) - Passes a dummy event object to handlers.
+ * - [`unbind()`](http://api.jquery.com/unbind/) - Does not support namespaces
+ * - [`val()`](http://api.jquery.com/val/)
+ * - [`wrap()`](http://api.jquery.com/wrap/)
+ *
+ * ## jQuery/jqLite Extras
+ * Angular also provides the following additional methods and events to both jQuery and jqLite:
+ *
+ * ### Events
+ * - `$destroy` - AngularJS intercepts all jqLite/jQuery's DOM destruction apis and fires this event
+ * on all DOM nodes being removed. This can be used to clean up any 3rd party bindings to the DOM
+ * element before it is removed.
+ *
+ * ### Methods
+ * - `controller(name)` - retrieves the controller of the current element or its parent. By default
+ * retrieves controller associated with the `ngController` directive. If `name` is provided as
+ * camelCase directive name, then the controller for this directive will be retrieved (e.g.
+ * `'ngModel'`).
+ * - `injector()` - retrieves the injector of the current element or its parent.
+ * - `scope()` - retrieves the {@link ng.$rootScope.Scope scope} of the current
+ * element or its parent. Requires {@link guide/production#disabling-debug-data Debug Data} to
+ * be enabled.
+ * - `isolateScope()` - retrieves an isolate {@link ng.$rootScope.Scope scope} if one is attached directly to the
+ * current element. This getter should be used only on elements that contain a directive which starts a new isolate
+ * scope. Calling `scope()` on this element always returns the original non-isolate scope.
+ * Requires {@link guide/production#disabling-debug-data Debug Data} to be enabled.
+ * - `inheritedData()` - same as `data()`, but walks up the DOM until a value is found or the top
+ * parent element is reached.
+ *
+ * @param {string|DOMElement} element HTML string or DOMElement to be wrapped into jQuery.
+ * @returns {Object} jQuery object.
+ */
+
+JQLite.expando = 'ng339';
+
+var jqCache = JQLite.cache = {},
+ jqId = 1,
+ addEventListenerFn = function(element, type, fn) {
+ element.addEventListener(type, fn, false);
+ },
+ removeEventListenerFn = function(element, type, fn) {
+ element.removeEventListener(type, fn, false);
+ };
+
+/*
+ * !!! This is an undocumented "private" function !!!
+ */
+JQLite._data = function(node) {
+ //jQuery always returns an object on cache miss
+ return this.cache[node[this.expando]] || {};
+};
+
+function jqNextId() { return ++jqId; }
+
+
+var SPECIAL_CHARS_REGEXP = /([\:\-\_]+(.))/g;
+var MOZ_HACK_REGEXP = /^moz([A-Z])/;
+var MOUSE_EVENT_MAP= { mouseleave: "mouseout", mouseenter: "mouseover"};
+var jqLiteMinErr = minErr('jqLite');
+
+/**
+ * Converts snake_case to camelCase.
+ * Also there is special case for Moz prefix starting with upper case letter.
+ * @param name Name to normalize
+ */
+function camelCase(name) {
+ return name.
+ replace(SPECIAL_CHARS_REGEXP, function(_, separator, letter, offset) {
+ return offset ? letter.toUpperCase() : letter;
+ }).
+ replace(MOZ_HACK_REGEXP, 'Moz$1');
+}
+
+var SINGLE_TAG_REGEXP = /^<(\w+)\s*\/?>(?:<\/\1>|)$/;
+var HTML_REGEXP = /<|&#?\w+;/;
+var TAG_NAME_REGEXP = /<([\w:]+)/;
+var XHTML_TAG_REGEXP = /<(?!area|br|col|embed|hr|img|input|link|meta|param)(([\w:]+)[^>]*)\/>/gi;
+
+var wrapMap = {
+ 'option': [1, ''],
+
+ 'thead': [1, '{{content.label}}
');
+ * $(document.body).append($div);
+ *
+ * angular.element(document).injector().invoke(function($compile) {
+ * var scope = angular.element($div).scope();
+ * $compile($div)(scope);
+ * });
+ * ```
+ */
+
+
+/**
+ * @ngdoc module
+ * @name auto
+ * @description
+ *
+ * Implicit module which gets automatically added to each {@link auto.$injector $injector}.
+ */
+
+var FN_ARGS = /^function\s*[^\(]*\(\s*([^\)]*)\)/m;
+var FN_ARG_SPLIT = /,/;
+var FN_ARG = /^\s*(_?)(\S+?)\1\s*$/;
+var STRIP_COMMENTS = /((\/\/.*$)|(\/\*[\s\S]*?\*\/))/mg;
+var $injectorMinErr = minErr('$injector');
+
+function anonFn(fn) {
+ // For anonymous functions, showing at the very least the function signature can help in
+ // debugging.
+ var fnText = fn.toString().replace(STRIP_COMMENTS, ''),
+ args = fnText.match(FN_ARGS);
+ if (args) {
+ return 'function(' + (args[1] || '').replace(/[\s\r\n]+/, ' ') + ')';
+ }
+ return 'fn';
+}
+
+function annotate(fn, strictDi, name) {
+ var $inject,
+ fnText,
+ argDecl,
+ last;
+
+ if (typeof fn === 'function') {
+ if (!($inject = fn.$inject)) {
+ $inject = [];
+ if (fn.length) {
+ if (strictDi) {
+ if (!isString(name) || !name) {
+ name = fn.name || anonFn(fn);
+ }
+ throw $injectorMinErr('strictdi',
+ '{0} is not using explicit annotation and cannot be invoked in strict mode', name);
+ }
+ fnText = fn.toString().replace(STRIP_COMMENTS, '');
+ argDecl = fnText.match(FN_ARGS);
+ forEach(argDecl[1].split(FN_ARG_SPLIT), function(arg) {
+ arg.replace(FN_ARG, function(all, underscore, name) {
+ $inject.push(name);
+ });
+ });
+ }
+ fn.$inject = $inject;
+ }
+ } else if (isArray(fn)) {
+ last = fn.length - 1;
+ assertArgFn(fn[last], 'fn');
+ $inject = fn.slice(0, last);
+ } else {
+ assertArgFn(fn, 'fn', true);
+ }
+ return $inject;
+}
+
+///////////////////////////////////////
+
+/**
+ * @ngdoc service
+ * @name $injector
+ *
+ * @description
+ *
+ * `$injector` is used to retrieve object instances as defined by
+ * {@link auto.$provide provider}, instantiate types, invoke methods,
+ * and load modules.
+ *
+ * The following always holds true:
+ *
+ * ```js
+ * var $injector = angular.injector();
+ * expect($injector.get('$injector')).toBe($injector);
+ * expect($injector.invoke(function($injector) {
+ * return $injector;
+ * })).toBe($injector);
+ * ```
+ *
+ * # Injection Function Annotation
+ *
+ * JavaScript does not have annotations, and annotations are needed for dependency injection. The
+ * following are all valid ways of annotating function with injection arguments and are equivalent.
+ *
+ * ```js
+ * // inferred (only works if code not minified/obfuscated)
+ * $injector.invoke(function(serviceA){});
+ *
+ * // annotated
+ * function explicit(serviceA) {};
+ * explicit.$inject = ['serviceA'];
+ * $injector.invoke(explicit);
+ *
+ * // inline
+ * $injector.invoke(['serviceA', function(serviceA){}]);
+ * ```
+ *
+ * ## Inference
+ *
+ * In JavaScript calling `toString()` on a function returns the function definition. The definition
+ * can then be parsed and the function arguments can be extracted. This method of discovering
+ * annotations is disallowed when the injector is in strict mode.
+ * *NOTE:* This does not work with minification, and obfuscation tools since these tools change the
+ * argument names.
+ *
+ * ## `$inject` Annotation
+ * By adding an `$inject` property onto a function the injection parameters can be specified.
+ *
+ * ## Inline
+ * As an array of injection names, where the last item in the array is the function to call.
+ */
+
+/**
+ * @ngdoc method
+ * @name $injector#get
+ *
+ * @description
+ * Return an instance of the service.
+ *
+ * @param {string} name The name of the instance to retrieve.
+ * @param {string=} caller An optional string to provide the origin of the function call for error messages.
+ * @return {*} The instance.
+ */
+
+/**
+ * @ngdoc method
+ * @name $injector#invoke
+ *
+ * @description
+ * Invoke the method and supply the method arguments from the `$injector`.
+ *
+ * @param {Function|Array.+ * Use this method to disable automatic scrolling. + * + * If automatic scrolling is disabled, one must explicitly call + * {@link ng.$anchorScroll $anchorScroll()} in order to scroll to the element related to the + * current hash. + */ + this.disableAutoScrolling = function() { + autoScrollingEnabled = false; + }; + + /** + * @ngdoc service + * @name $anchorScroll + * @kind function + * @requires $window + * @requires $location + * @requires $rootScope + * + * @description + * When called, it scrolls to the element related to the specified `hash` or (if omitted) to the + * current value of {@link ng.$location#hash $location.hash()}, according to the rules specified + * in the + * [HTML5 spec](http://dev.w3.org/html5/spec/Overview.html#the-indicated-part-of-the-document). + * + * It also watches the {@link ng.$location#hash $location.hash()} and automatically scrolls to + * match any anchor whenever it changes. This can be disabled by calling + * {@link ng.$anchorScrollProvider#disableAutoScrolling $anchorScrollProvider.disableAutoScrolling()}. + * + * Additionally, you can use its {@link ng.$anchorScroll#yOffset yOffset} property to specify a + * vertical scroll-offset (either fixed or dynamic). + * + * @param {string=} hash The hash specifying the element to scroll to. If omitted, the value of + * {@link ng.$location#hash $location.hash()} will be used. + * + * @property {(number|function|jqLite)} yOffset + * If set, specifies a vertical scroll-offset. This is often useful when there are fixed + * positioned elements at the top of the page, such as navbars, headers etc. + * + * `yOffset` can be specified in various ways: + * - **number**: A fixed number of pixels to be used as offset.
+ * - **function**: A getter function called everytime `$anchorScroll()` is executed. Must return + * a number representing the offset (in pixels).
+ * - **jqLite**: A jqLite/jQuery element to be used for specifying the offset. The distance from + * the top of the page to the element's bottom will be used as offset.
+ * **Note**: The element will be taken into account only as long as its `position` is set to + * `fixed`. This option is useful, when dealing with responsive navbars/headers that adjust + * their height and/or positioning according to the viewport's size. + * + *
+ *
+ * In order for `yOffset` to work properly, scrolling should take place on the document's root and
+ * not some child element.
+ *
+ *
+ * @example
+
+ Go to bottom
+ You're at the bottom!
+
+ + * The example below illustrates the use of a vertical scroll-offset (specified as a fixed value). + * See {@link ng.$anchorScroll#yOffset $anchorScroll.yOffset} for more details. + * + * @example +
+ Anchor {{x}} of 5
+
+
+
+
+
+
+
+ Cached Values
+
+
+ :
+
+
+
+ Cache Info
+
+
+ :
+
+
+ -
+ *
- **id**: the id of the cache instance + *
- **size**: the number of entries kept in the cache instance + *
- **...**: any additional properties from the options object when creating the + * cache. + *
+ * **Note:** This document is an in-depth reference of all directive options.
+ * For a gentle introduction to directives with examples of common use cases,
+ * see the {@link guide/directive directive guide}.
+ *
+ *
+ * ## Comprehensive Directive API
+ *
+ * There are many different options for a directive.
+ *
+ * The difference resides in the return value of the factory function.
+ * You can either return a "Directive Definition Object" (see below) that defines the directive properties,
+ * or just the `postLink` function (all other properties will have the default values).
+ *
+ *
+ * **Best Practice:** It's recommended to use the "directive definition object" form.
+ *
+ *
+ * Here's an example directive declared with a Directive Definition Object:
+ *
+ * ```js
+ * var myModule = angular.module(...);
+ *
+ * myModule.directive('directiveName', function factory(injectables) {
+ * var directiveDefinitionObject = {
+ * priority: 0,
+ * template: '', // or // function(tElement, tAttrs) { ... },
+ * // or
+ * // templateUrl: 'directive.html', // or // function(tElement, tAttrs) { ... },
+ * transclude: false,
+ * restrict: 'A',
+ * templateNamespace: 'html',
+ * scope: false,
+ * controller: function($scope, $element, $attrs, $transclude, otherInjectables) { ... },
+ * controllerAs: 'stringIdentifier',
+ * bindToController: false,
+ * require: 'siblingDirectiveName', // or // ['^parentDirectiveName', '?optionalDirectiveName', '?^optionalParent'],
+ * compile: function compile(tElement, tAttrs, transclude) {
+ * return {
+ * pre: function preLink(scope, iElement, iAttrs, controller) { ... },
+ * post: function postLink(scope, iElement, iAttrs, controller) { ... }
+ * }
+ * // or
+ * // return function postLink( ... ) { ... }
+ * },
+ * // or
+ * // link: {
+ * // pre: function preLink(scope, iElement, iAttrs, controller) { ... },
+ * // post: function postLink(scope, iElement, iAttrs, controller) { ... }
+ * // }
+ * // or
+ * // link: function postLink( ... ) { ... }
+ * };
+ * return directiveDefinitionObject;
+ * });
+ * ```
+ *
+ *
+ * **Note:** Any unspecified options will use the default value. You can see the default values below.
+ *
+ *
+ * Therefore the above can be simplified as:
+ *
+ * ```js
+ * var myModule = angular.module(...);
+ *
+ * myModule.directive('directiveName', function factory(injectables) {
+ * var directiveDefinitionObject = {
+ * link: function postLink(scope, iElement, iAttrs) { ... }
+ * };
+ * return directiveDefinitionObject;
+ * // or
+ * // return function postLink(scope, iElement, iAttrs) { ... }
+ * });
+ * ```
+ *
+ *
+ *
+ * ### Directive Definition Object
+ *
+ * The directive definition object provides instructions to the {@link ng.$compile
+ * compiler}. The attributes are:
+ *
+ * #### `multiElement`
+ * When this property is set to true, the HTML compiler will collect DOM nodes between
+ * nodes with the attributes `directive-name-start` and `directive-name-end`, and group them
+ * together as the directive elements. It is recommended that this feature be used on directives
+ * which are not strictly behavioural (such as {@link ngClick}), and which
+ * do not manipulate or replace child nodes (such as {@link ngInclude}).
+ *
+ * #### `priority`
+ * When there are multiple directives defined on a single DOM element, sometimes it
+ * is necessary to specify the order in which the directives are applied. The `priority` is used
+ * to sort the directives before their `compile` functions get called. Priority is defined as a
+ * number. Directives with greater numerical `priority` are compiled first. Pre-link functions
+ * are also run in priority order, but post-link functions are run in reverse order. The order
+ * of directives with the same priority is undefined. The default priority is `0`.
+ *
+ * #### `terminal`
+ * If set to true then the current `priority` will be the last set of directives
+ * which will execute (any directives at the current priority will still execute
+ * as the order of execution on same `priority` is undefined). Note that expressions
+ * and other directives used in the directive's template will also be excluded from execution.
+ *
+ * #### `scope`
+ * **If set to `true`,** then a new scope will be created for this directive. If multiple directives on the
+ * same element request a new scope, only one new scope is created. The new scope rule does not
+ * apply for the root of the template since the root of the template always gets a new scope.
+ *
+ * **If set to `{}` (object hash),** then a new "isolate" scope is created. The 'isolate' scope differs from
+ * normal scope in that it does not prototypically inherit from the parent scope. This is useful
+ * when creating reusable components, which should not accidentally read or modify data in the
+ * parent scope.
+ *
+ * The 'isolate' scope takes an object hash which defines a set of local scope properties
+ * derived from the parent scope. These local properties are useful for aliasing values for
+ * templates. Locals definition is a hash of local scope property to its source:
+ *
+ * * `@` or `@attr` - bind a local scope property to the value of DOM attribute. The result is
+ * always a string since DOM attributes are strings. If no `attr` name is specified then the
+ * attribute name is assumed to be the same as the local name.
+ * Given `