CasaOS in Proxmox LXC not showning Network & Storage Status.

[Andersonong-github]

Hi Casa Teams,

Thanks for the fabulous OS created & I'm not sure this is a bugs or only happened to me.. below are my hardware specs.

• OS: linux
• CasaOS Version: 0.4.6
• Disk Total: 30130
• Disk Used: 17053
• System Info: [Debian GNU/Linux 12 \l Bit:64 Mem:8192M Core:2 Linux casaos 6.5.11-7-pve add widget #1 SMP PREEMPT_DYNAMIC PMX 6.5.11-7 (2023-12-05T09:44Z) x86_64 GNU/Linux]
• Remote Version: 0.4.6
• Browser: Chrome
• Version: 120.0.0.0

I'm installed in Proxmox LXC. when I access the CasaOS Dashboard. my storage & Network status are showing 0 bytes. I follow the article to configure the IPv4 to DHCP but result still the same.. apprieciated your help. thanks

[tomtheswede]

Seconded. Installed using a Proxmox helper script on Intel N100 PC with Debian 12 LXC:
bash -c "$(wget -qLO - https://github.com/tteck/Proxmox/raw/main/ct/casaos.sh)"

[Andersonong-github]

Hi Sir.
same also with the script that you provided..

[LinkLeong]

This piece of code is to get the information of the network card, you need to make it clear that you confirm the system is not the system we support, in addition, we are here to get the information of the network card by default is the data of the physical network card. @Andersonong-github

[gvillo]

@LinkLeong experiencing the same, this is what I got after running that command:

[GiorgioRX]

did anyone found a solution for this?

[thorracin1]

Same here any updates

[ChristoffBo]

also waiting for a sollution

[Seniix3]

Same issue over here.

[Andersonong-github]

by the way, I'm tried ZimaOS & dashboard are similar as CasaOS. network & storage are wonderful when in Proxmox LXC. Thanks.

[yeswanthkumar97]

@Andersonong-github Can you reply on how you installed ZimaOS in an LXC?

[yeswanthkumar97]

Thanks for your reply but I believe these steps are for installing ZimaOS in a VM.
In your previous message, you mentioned installing ZimaOS in LXC hence I was curious about the steps.

[tomshomelab]

This is still an issue, a friend of mine ran into this doing this installation