ftdi.txt

  #include "esp_camera.h"
  #include "Arduino.h"
  #include "FS.h"                // SD Card ESP32
  #include "SD_MMC.h"            // SD Card ESP32
  #include "soc/soc.h"           // Disable brownour problems
  #include "soc/rtc_cntl_reg.h"  // Disable brownour problems
  #include "driver/rtc_io.h"
  #include <EEPROM.h>            // read and write from flash memory
  #include "SD.h"
  #include <WiFi.h>
  #include "ESP32_MailClient.h"
#include "SPIFFS.h"
#include "esp_timer.h"
#include "img_converters.h"
#include "driver/rtc_io.h"



// REPLACE WITH YOUR NETWORK CREDENTIALS

char ssid[] = "Enter_username";
char password[] = "Enter_password";

// To send Email using Gmail use port 465 (SSL) and SMTP Server smtp.gmail.com
// YOU MUST ENABLE less secure app option https://myaccount.google.com/lesssecureapps?pli=1
#define emailSenderAccount    "Sender's account"    
#define emailSenderPassword   "Sender's password"
#define emailRecipient        "Recepient account"  
#define smtpServer            "smtp.gmail.com"
#define smtpServerPort         465 //587 //465
#define emailSubject          "ESP32_SndPicture"
SMTPData smtpData;

// Pin definition for CAMERA_MODEL_AI_THINKER
#define PWDN_GPIO_NUM     32
#define RESET_GPIO_NUM    -1
#define XCLK_GPIO_NUM      0
#define SIOD_GPIO_NUM     26
#define SIOC_GPIO_NUM     27

#define Y9_GPIO_NUM       35
#define Y8_GPIO_NUM       34
#define Y7_GPIO_NUM       39
#define Y6_GPIO_NUM       36
#define Y5_GPIO_NUM       21
#define Y4_GPIO_NUM       19
#define Y3_GPIO_NUM       18
#define Y2_GPIO_NUM        5
#define VSYNC_GPIO_NUM    25
#define HREF_GPIO_NUM     23
#define PCLK_GPIO_NUM     22
#define TIME_TO_SLEEP  10            //time ESP32 will go to sleep (in seconds)
#define uS_TO_S_FACTOR 1000000ULL   //conversion factor for micro seconds to seconds */
int pictureNumber = 0;


void setup(){
 WRITE_PERI_REG(RTC_CNTL_BROWN_OUT_REG, 0); //disable brownout detector
 
  Serial.begin(115200);
  //Serial.setDebugOutput(true);
  Serial.println();


 delay(500);
 Serial.println("WELLCOME");
if (!SPIFFS.begin(true)) {
  Serial.println("An Error has occurred while mounting SPIFFS");
  ESP.restart();
}
else {
  Serial.println("SPIFFS mounted successfully");
}
SPIFFS.format();

 
   EEPROM.begin(400);
   
 
  camera_config_t config;
  config.ledc_channel = LEDC_CHANNEL_0;
  config.ledc_timer = LEDC_TIMER_0;
  config.pin_d0 = Y2_GPIO_NUM;
  config.pin_d1 = Y3_GPIO_NUM;
  config.pin_d2 = Y4_GPIO_NUM;
  config.pin_d3 = Y5_GPIO_NUM;
  config.pin_d4 = Y6_GPIO_NUM;
  config.pin_d5 = Y7_GPIO_NUM;
  config.pin_d6 = Y8_GPIO_NUM;
  config.pin_d7 = Y9_GPIO_NUM;
  config.pin_xclk = XCLK_GPIO_NUM;
  config.pin_pclk = PCLK_GPIO_NUM;
  config.pin_vsync = VSYNC_GPIO_NUM;
  config.pin_href = HREF_GPIO_NUM;
  config.pin_sscb_sda = SIOD_GPIO_NUM;
  config.pin_sscb_scl = SIOC_GPIO_NUM;
  config.pin_pwdn = PWDN_GPIO_NUM;
  config.pin_reset = RESET_GPIO_NUM;
  config.xclk_freq_hz = 20000000;
  config.pixel_format = PIXFORMAT_JPEG; 

//gpio_pullup_en(GPIO_NUM_12);  // ajout
// Pin(14, Pin.IN, Pin.PULL_UP)

  
  if(psramFound()){
    config.frame_size = FRAMESIZE_UXGA; // FRAMESIZE_ + QVGA|CIF|VGA|SVGA|XGA|SXGA|UXGA
    config.jpeg_quality = 10;
    config.fb_count = 2;
  } else {
    config.frame_size = FRAMESIZE_SVGA;
    config.jpeg_quality = 12;
    config.fb_count = 1;
  }
  
  // Init Camera
  esp_err_t err = esp_camera_init(&config);
  if (err != ESP_OK) {
    Serial.printf("Camera init failed with error 0x%x", err);
    return;
  }



 
  
//****** debut de boucle***************************************  
  camera_fb_t * fb = NULL;
  
  // Take Picture with Camera
  fb = esp_camera_fb_get();  
  if(!fb) {
    Serial.println("Camera capture failed");
    return;
  }
String path = "/Sight.jpg";
  File file = SPIFFS.open(path, FILE_WRITE);
  // Path where new picture will be saved in SD Card
  


  if(!file){
    Serial.println("Failed to open file in writing mode");
  } 
  else {
    file.write(fb->buf, fb->len); // payload (image), payload length
    Serial.printf("Saved file to path: %s\n", path);
//    EEPROM.write(0, pictureNumber);      // Not used 
//    EEPROM.commit();
  }
  file.close();
  esp_camera_fb_return(fb); 
  
  // Turns off the ESP32-CAM white on-board LED (flash) connected to GPIO 4
  pinMode(4, OUTPUT);
  digitalWrite(4, LOW);
  rtc_gpio_hold_en(GPIO_NUM_4);
//*************************************************************************************************************************

  Serial.print("Connecting");

  WiFi.begin(ssid, password);
  while (WiFi.status() != WL_CONNECTED) {
    Serial.print(".");
    delay(200);
  }

  Serial.println();
  Serial.println("WiFi connected.");
  Serial.println();
  Serial.println("Preparing to send email");
  Serial.println();

  
  // Set the SMTP Server Email host, port, account and password
  smtpData.setLogin(smtpServer, smtpServerPort, emailSenderAccount, emailSenderPassword);

  // For library version 1.2.0 and later which STARTTLS protocol was supported,the STARTTLS will be 
  // enabled automatically when port 587 was used, or enable it manually using setSTARTTLS function.
  //smtpData.setSTARTTLS(true);

  // Set the sender name and Email
  smtpData.setSender("Cat_00", emailSenderAccount);

  // Set Email priority or importance High, Normal, Low or 1 to 5 (1 is highest)
  smtpData.setPriority("High");

  // Set the subject
  smtpData.setSubject(emailSubject);

  // Set the message with HTML format
  smtpData.setMessage("<div style=\"color:#2f4468;\"><h1>Find a thing !</h1><p>- Sent from ESP32 board</p></div>", true);
  // Set the email message in text format (raw)
  //smtpData.setMessage("Thing on position #00", false);

  // Add recipients, you can add more than one recipient
  smtpData.addRecipient(emailRecipient);
  //smtpData.addRecipient("YOUR_OTHER_RECIPIENT_EMAIL_ADDRESS@EXAMPLE.com");
 smtpData.setFileStorageType(MailClientStorageType::SPIFFS);
  smtpData.addAttachFile("/Sight.jpg");
 
  //smtpData.setFileStorageType(MailClientStorageType::SD);
  
  smtpData.setSendCallback(sendCallback);

 

  //Start sending Email, can be set callback function to track the status
  if (!MailClient.sendMail(smtpData))
    Serial.println("Error sending Email, " + MailClient.smtpErrorReason());

  //Clear all data from Email object to free memory
  smtpData.empty();
  esp_sleep_enable_timer_wakeup(TIME_TO_SLEEP * uS_TO_S_FACTOR);
  esp_deep_sleep_start();

  
}


void loop() {


  
}

// Callback function to get the Email sending status
void sendCallback(SendStatus msg) {
  // Print the current status
  Serial.println(msg.info());

  // Do something when complete
  if (msg.success()) {
    Serial.println("----------------");
  }
}