-
-
Notifications
You must be signed in to change notification settings - Fork 274
New issue
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
Option to mow in a randomized pattern? #3
Comments
If you want to avoid making "tracks" or stripes (which many people try to make on purpose btw), the much better solution is not reverting to random navigation, but randomizing either the starting point (so tracks are offset a bit on each session, although with the narrow mowing width of most robots that may not yield much) or rotate the orientation of the tracks by a random angle. Pure random is infuriatingly inefficient, it drives me up the wall that my robot can mow for hours or even days and go over the same spots 10 times or more, and still miss many other spots. Especially after a period of rain, if my grass is long and those spots stand out like a sore thumb, all the while the rest of my lawn is covered in a random pattern that looks as is if my gardenerer was drunk. FWIW this is the exact reason Im interested in this project; I already buried a perimeter wire, but I want my robot to navigate smarter within that perimeter |
A robotic lawn mower does not create the "stripes" which many People (including me) like even if it would cut in a straight pattern. I agree on the inefficiency in the randomized pattern. But there is a reason to why the GPS mowers are sticking to the randomized (which not really is randomized) pattern on their rtk-gps models. A robotic lawn mower, when used as intended, creates a much nicer lawn compared to a normal cutter. The reason behind it is that the robotic "always" cuts and does it from different angles. Moss and other none-grass things does not like it, and is replaced by the grass. - So there are different views on what a robotic cutter is, if it is intended to cut the lawn as quickly as possible, or if it is intended to "take care" of the lawn. If running on straight lines, then care needs yo be taken to the uncut grass that remains when the wheel presses down rhe grass, and then is unable to cut that grass on the next line and so on. Here is an interesting article on the line vs random cutting. It says that there is only a 30% time difference between the two. https://robolever.com/random-vs-systematic-robotic-mowers-which-is-better/ As said. We like things differently, so If it would be possible to run either straight lines, or in a random pattern and use gps for perimeter then it would be great |
Agreed 👍 |
Mowing from random angles matters, but systematic mowing with a randomly rotated pattern every session would yield the same result. I dont see the downside. Heck, since his code uses slic3r code, you can even use any other infill pattern you want, do a spiral on mondays, rectalinear on tuesdays, gyroids on wednesday, plenty more to chose from, all of them far more efficient than random, and you can change the start point or orientation every time. Speaking of efficiency, if you have a square lawn with no obstacles, maybe the 30% less efficient claim is right, but for sure its not in my garden, where my robot can mow for 3-4-5 days and still not cover every patch. If it mowed systematically, knowing its width and estimating speed, I guess it would take ~3-4 hours? Even if its 24hr, that is a massive difference. I used to have a random navigation robot vacuum, and that is okay, because you cant tell if it "missed" a spot for a few days. Lawn mower is different, if you cant mow for a week due to rainfall, and then it takes almost a week before the robot to "catch up" and get everywhere. So during that week you will have patches of freshly mowed grass next to nearly 2 week growth, not very pretty. More than once I took my old mower and mowed my lawn by hand to avoid exactly that. Anyway, if that is what you want, who am I to stop you, but it makes no sense to me. |
For me the point is not so much about wanting randomness Rather it's good to cut the grass from different angles with different patterns It's definitely true that for real world lawns, it can be 4 or 5 days of permanent mowing before the same hit is hit twice Structured mowing with rotated efficient row by row mowing would be a great feature This project is amazing 👍👍👍 |
There is a mow pattern orientation in the mower config, this should be relatively easy to have randomized at the start of each mow should the user input that option. |
Is it possible to have the mower to cut the grass in a randomized pattern and only use the perimeter as a "limit" for which it should stay within?
Having the mower cut on the same lines over and over again will create track's in the lawn. There is a reason to why husqvarna has spent a lot of time developing how the robot should find its way back to the charger, where it actually varies its distance to the perimeter cable to avoid creating track's.
Husqvarna has now released a gps rtk version of its automower (which is very expensive) and I think that stiga will release one soon as well. As far as I know, this still cut in a randomized pattern, while using gps for the perimeter limits.
Very good project though!
The text was updated successfully, but these errors were encountered: