Fluorescence exposure time

[kyoohkim]

Exposure time for fluorescence mode in the Erlangen setup is limited up to 7 ms and cannot be set above 7 ms.

[raimund-schluessler]

@kyoohkim Have you checked whether you can freely adjust the exposure time with the vendor software?

[kyoohkim]

Yes, I can adjust the exposure time with the vendor software freely.
If I turn off the vendor software with this exposure time setting, this setting is saved and I can initialize again with the same setting in the vendor software. However, if I initialize Brillouin Acquisition software, the exposure time is set as 7 ms and cannot be set above.