status "plugged" is not detected

[name-snrl]

I want to see when my laptop plugged. A similar issue is described in #253.
My device is a Thinkpad t440s with NixOS unstable on board. I use tlp to set charging thresholds

I also tried using "format-plugged" but nothing changed.

[clownhelmet]

Same issue here. I'm not using TLP but it seems it uses the same interface /sys/class/power_supply/BAT0/charge_control_end_threshold.

cat /sys/class/power_supply/BAT0/status Not charging

cat /sys/class/power_supply/AC0/online 1

If the battery is at the threshold percentage when I unplug, it shows the plugged format when I plug the battery back in and the status is 'Discharging'. However, a few seconds later when the status switches to 'Not charging', it stops showing the plugged format.

[dtk9289]

bump

[Alexays]

Should be fixed with #1679

[geogiraux]

hi, sorry to make this "revive" but I have the same problem with waybar 0.11.0. Could @clownhelmet or @name-snrl confirm it is solved please ? If it's ok for you I will fill a new issue and provide my own informations