You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
auto-cpufreq --debug
Using settings defined in /etc/auto-cpufreq.conf file
-------------------------------------------------------------------------------
Linux distro: Arch Linux rolling n/a
Linux kernel: 6.5.2-arch1-1
Processor: AMD Ryzen 7 7730U with Radeon Graphics
Cores: 16
Architecture: x86_64
Driver: acpi-cpufreq
------------------------------ Current CPU stats ------------------------------
CPU max frequency: 2000 MHz
CPU min frequency: 1600 MHz
Core Usage Temperature Frequency
CPU0 1.0% 47 °C 2000 MHz
CPU1 1.0% 47 °C 1988 MHz
CPU2 0.0% 47 °C 2000 MHz
CPU3 2.0% 47 °C 1717 MHz
CPU4 1.0% 47 °C 2000 MHz
CPU5 1.0% 47 °C 2000 MHz
CPU6 1.0% 47 °C 2000 MHz
CPU7 0.0% 47 °C 2000 MHz
CPU8 0.0% 47 °C 2000 MHz
CPU9 0.0% 47 °C 2000 MHz
CPU10 1.0% 47 °C 2000 MHz
CPU11 0.0% 47 °C 2000 MHz
CPU12 1.0% 47 °C 2000 MHz
CPU13 0.0% 47 °C 2000 MHz
CPU14 1.0% 47 °C 2000 MHz
CPU15 1.0% 47 °C 2000 MHz
CPU fan speed: 2200 RPM
auto-cpufreq version: 1.9.9 (git: ee888d47)
Python: 3.11.5
psutil package: 5.9.5
platform package: 1.0.8
click package: 8.1.7
distro package: 1.8.0
Computer type: Notebook
Battery is: charging
auto-cpufreq system resource consumption:
cpu usage: 0.0 %
memory use: 0.17 %
Total CPU usage: 1.1 %
Total system load: 0.49
Average temp. of all cores: 47.00 °C
Currently using: performance governor
Currently turbo boost is: off
-------------------------------------------------------------------------------
Also please be descriptive about the issue you're reporting, i.e: what you tried & what's the expected behaviour.
My Thinkpad E14 laptop with an AMD Ryzen 7730U CPU works well with battery with temps staying around 40 degrees most of the time. However, while charging, the laptop heats up to 50 degrees on almost slight to no load. I run a minimal environment (dwm + terminal applications + firefox). This is the default behaviour without any config file.
Having gone through a similar issue (#279), even when turbo is off, the heating issue persists. Albeit in that issue the CPU was Intel (not sure if that makes a difference).
My user-defined config file:
# settings for when connected to a power source
[charger]
# see available governors by running: cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_available_governors
# preferred governor.
governor = powersave
# minimum cpu frequency (in kHz)
# example: for 800 MHz = 800000 kHz --> scaling_min_freq = 800000
# see conversion info: https://www.rapidtables.com/convert/frequency/mhz-to-hz.html
# to use this feature, uncomment the following line and set the value accordingly
# scaling_min_freq = 800000
# maximum cpu frequency (in kHz)
# example: for 1GHz = 1000 MHz = 1000000 kHz -> scaling_max_freq = 1000000
# see conversion info: https://www.rapidtables.com/convert/frequency/mhz-to-hz.html
# to use this feature, uncomment the following line and set the value accordingly
# scaling_max_freq = 1000000
# turbo boost setting. possible values: always, auto, never
turbo = auto
# settings for when using battery power
[battery]
# see available governors by running: cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_available_governors
# preferred governor
governor = performance
# minimum cpu frequency (in kHz)
# example: for 800 MHz = 800000 kHz --> scaling_min_freq = 800000
# see conversion info: https://www.rapidtables.com/convert/frequency/mhz-to-hz.html
# to use this feature, uncomment the following line and set the value accordingly
# scaling_min_freq = 800000
# maximum cpu frequency (in kHz)
# see conversion info: https://www.rapidtables.com/convert/frequency/mhz-to-hz.html
# example: for 1GHz = 1000 MHz = 1000000 kHz -> scaling_max_freq = 1000000
# to use this feature, uncomment the following line and set the value accordingly
# scaling_max_freq = 1000000
# turbo boost setting. possible values: always, auto, never
turbo = auto
The text was updated successfully, but these errors were encountered:
Well before posting, I realized I had not changed the AMD p-state CPU driver to acpi-cpufreq. Unfortunately, even after changing to it, I'm facing the same issue.
Even though the sensors don't detect any temp >50 degrees, the base of the laptop heats up quite a bit while charging. @AdnanHodzic
Fill out information requested in this template, without doing so issue will be ignored & closed!
Have you tried?
System information:
Add/paste output of:
Also please be descriptive about the issue you're reporting, i.e: what you tried & what's the expected behaviour.
My Thinkpad E14 laptop with an AMD Ryzen 7730U CPU works well with battery with temps staying around 40 degrees most of the time. However, while charging, the laptop heats up to 50 degrees on almost slight to no load. I run a minimal environment (dwm + terminal applications + firefox). This is the default behaviour without any config file.
Having gone through a similar issue (#279), even when turbo is off, the heating issue persists. Albeit in that issue the CPU was Intel (not sure if that makes a difference).
My user-defined config file:
The text was updated successfully, but these errors were encountered: