bugs

Fig 7.5 -- need horizontal misalignment number to compute
7.8.3 -- need number for pendulum angular orientation
7.8.2 -- verify horizontal misalignment numbers
7.7 -- Q-tester newtonian computation
7.6.5 -- Newtonian Assembly figure
5.6.1.3 -- explaination of log-likelihood
5.4 -- Triangle-plot sign convention
Figure 5.8 -- Demo triangle plot
Figure 5.6 -- verify that end-to-end calibration figure makes sense
Figure 5.5 -- filtering coefficient is wrong?
5.3.5 -- runs affected by clock drift
5.3.5 -- size of clock drift
5.3.2 -- runs with clock offsets
5.2 -- timing section remains a mess
4.5 -- Assigning final number for distance metrology
4.3 -- attractor-side metrology (cap and touching)
4.2 -- Pendulum angle (tip) needs major work
4.1.4 Vertical positioning pictures
4.1.4 Vertical positioning distance
4.1.4 Vertical positioning precision
4.3 -- Horizontal positioning photo
4.1.2 -- sideview positioning photos
4.1.1 -- bounce test figure and numbers
3.3 -- random attractor motion text
3.3 -- random attractor motion figure
3.2 -- daily operation description
3.1.7 -- switches per cut description
3.1.4 -- Lag padding number for synchronization
2.6.3 -- typical flexure motion plot
2.6.2 -- typical noise plot?
2.6.1 -- typical torque trace
2.5.2.5 -- expand on pendulum magnetic moment
2.5.2.4 -- flexure non-linearity torque
2.5.2.4 -- flexure non-linearity number
2.5.2.4 -- nonlinear tilt feedthrough number
2.5.2.3 -- number/cubic micron for torque void
2.5.2.3 -- pendulum vertical position
2.5.2.3 -- pendulum horizontal position
2.5.2.2 -- attractor vibration coupling to foil
2.5.2.2 -- modulation of ambient foil motion
2.5.2 -- definition of "typical" systematic distance
2.5.2 -- definition of "typical" systematic distance
2.5.1.4 -- contact potential noise discussion
2.4.3 -- online alignment plots
2.4.1 -- Flexure runout figure
2.4.1 -- initial alignment description
2.4.1 -- optical alignment number
2.3.9.2 -- high-frequency ifo spectrum
2.3.9.1 -- "very first fringe" psi
2.3.9 -- foil interferometer blah blah blah
2.3.9 -- plot of ifoSim function
2.3.9 -- Measured foil interferometer crash signal
2.3.9 -- foil operating point
2.3.9 -- foil operating point uncertainty
2.3.7 -- verify calibration metrology
2.3.2.2 -- foil stretcher clamping ring thickness
2.3.2 -- autocollimator picture
2.3.1 -- attractor schematic with dimensions
2.2.3 -- angled plate torque formula is wrong
2.2.2 -- recheck yukawa two
2.2.2 -- pendulum/attractor schematic
11.2 -- raw torque plots, systematic subtracted, omitted, added
10.1 -- raw foil displacement figure, triangle-styl
9.4.3 -- ifo spot heating torque uncertainty
9.4.3 -- ifo spot heating torque value
9.4.3 -- ifo spot heating stroke mode
9.4.3 -- ifo spot heating runs
9.4.2 -- expand attractor-frequency temperature variation
9.3 -- biased attractor torque difference
9.2 -- coil on apparatus diagram


Make iteration cut permanent in fitting plots.